Multiple Graphs On One Screen And Moving Graphs
Feb 12, 2014
i have attached a sheet where I have 4 graphs on one sheet. I prefer this to an overlay. I would like to add a 5th graph but it would make all the the graphs too small. Is there a way to make the graph background longer. For instance, extend the length of this so that I can put multiple graphs on it and then just scroll from top to bottom to review them? Also, how do I copy and paste these individual graphs into a newly created graph. copy/paste doesn't work on these?
Boiler.xls‎
View 1 Replies
ADVERTISEMENT
Mar 6, 2007
I currently have a 70 page spreadsheet with similar data that needs representing in pie chart format. All the column headers are the same and I only need 2 columns (A and T).
There are however different numbers of rows. Is it possible to write a macro to detect the number of rows before it draws the relevant pie chart (I've managed the pie chart bit!!)
See attached example, same concept but cant post real data.
View 9 Replies
View Related
Jan 4, 2012
I am trying to copy a group of six graphs from one Sheet "Charts" and paste them in another Sheet "FinShots" in the same Workbook. I have grouped the graphs and named the group "FinShots1".
But I can't seem to write a code that will copy group "FinShots1" from "Charts" and paste in "FinShots".
View 2 Replies
View Related
Apr 3, 2012
I am currently working through data received from several experimental runs I have done for my masters studies (In chemical engineering). I need to create a chart for every experiment but coding the macro to do that has been near impossible. I have the file with the first graph drawn but I dont know how to post it.
I know it will be possible to draw every chart by hand but I am waiting on another 300+ data sets and then the amount becomes crazy.
View 4 Replies
View Related
Nov 5, 2009
I would like to create 2 graphs for each set of data in my worksheet. the first set of data that I would like to create a 2D line chart for is in cells AQ3:AS19 (not sure if that is the correct syntax??) and the second is AW3:AY3.
I would like to position the first chart (top right corner) at BA3 and re-size it so that it is 17 cells tall and 7 cells wide. the second chart should be positioned at BI3 and the same dimensions.
I would like to delete the chart legend for both graphs
then I need to repeat about 1000 times. Each new set of data starts 20 cells lower (ie. AQ3, AQ22, AQ41..). Or every time "Band" is found in column AP.
View 4 Replies
View Related
Jul 20, 2007
see attachment.
I am looking a macro that will create as many graphs as there are counties (column a) in the data range (A4:N89 for this example). There could be a maximum of ~3000 counties, which would place the data range at roughly excel's limit (A4:N65000).
In any case, the graphs would take data from column F and look like the 3 graphs i have provided in the attachment. The graphs are simply graphing share for the top 25 lenders in each county. So, for example, Texas contains 254 counties--I would like a macro that creates 254 graphs, one next to the other, starting at cell O4 through column IV4 and then repeating at O22 through column IV22 and so on, until all the graphs for each county in the data range are created.
Also, would it be possible, just as in the attachment, for the macro to change the color of the data bar associated with a particular lender, in this case JPMORGAN CHASE BANK? In the attachment, I made the three bars associated with JPMORGAN CHASE red. If there is a county in which this particular is not in the Top 25, then all of the bar colors in the graph remain blue.
Would it be possible to do the exact same (macro that graphs off the pivot table) but include the data for the Top 25 Totals, Non-Top 25 Totals, and the County Total?
In other words, the graphs would look exactly as they do now, but, for example, the first graph would contain data from F5:F32 rather than just from F5:F29. Furthermore, the graph's axis label would pull from C5:C29 AND B30:B31 AND A32.
View 3 Replies
View Related
Sep 4, 2007
I'm pretty much a novice at Excel so obviously my knowledge is fairly limited. Basically I have created 2 sheets called 'Week 1 - By Day' and 'Week 1 - By Campaign'. The first sheet (By Day) contains data which supplies graphs to not only that sheet but also to sheet 2 (By Campaign). Sheet 2 (By Campaign) only contains graphs sourced from data within sheet 1.
So, I need to copy both of these 52 times (for every week of the year). That’s 52 x sheet 1 and 52 x sheet 2.
I have been able to copy sheet 1 easily enough by holding down the Ctrl button and dragging the sheet. This works fine and the formula and graphs within the sheet change automatically. However, the major problem at the moment is sheet 2(sheet 2 only contains Graphs which is related to data from sheet 1). When I do the same thing with sheet 2 (hold down Ctrl and drag) the graphs within the new sheet (sheet 4) are still sourcing the data from sheet 1 instead of sourcing the data from Sheet 3 'Week 2 - By Day'.
View 9 Replies
View Related
Aug 6, 2007
I am trying to use VB to create 50 charts each with 3 lines using data from 3 different excel spreadsheets in the same workbook. I am able to create one chart with 3 lines using data from the three spreadsheets, this is good. However I exprience problems when i try to insert a loop to create 50 charts that correspond the the rows in each spreadsheet. I am new to VB and am very inexperienced with VB. In each worksheet my data is arranged in rows. row 1 of each worksheet has the header information and rows 2 through row 50 have my corresponding data. for example A2 lists the name and F2 through T2 lists the data. I have tried a bunch of different things but nothing seems to alllow me to be able to create multiple charts which correspond to each row of data?
Sub Chart2PPT()
Dim arow As Integer
Dim acol As Integer
Dim StartPoint As Integer
Dim EndPoint As Integer
Dim rStartPoint As String
Dim rEndPoint As String
StartPoint = 2
EndPoint = 4
For arow = 2 To 5
rStartPoint = "f" & StartPoint
rEndPoint = "t" & EndPoint
Charts.Add
ActiveChart.ChartArea.Select
ActiveChart.ChartType = xlLine 'Type of graph........................
View 2 Replies
View Related
Jun 26, 2008
I need to make a macro that creates a specified number of graphs depending on the file's number of data sets. I know the number of sets that are in the data, and I know the number of data points that were taken. Here is what I have:
Sub Graphs()
Dim Startpoint As Integer
Dim Endpoint As Integer
Dim count As Integer
Dim xStart As String
Dim xEnd As String
Dim NumberSets As Integer
Dim yStart As String
Dim yEnd As String
Dim DataSet As Integer
Dim Data
Startpoint = 11 'The first set always starts in row 11
Endpoint = Range("L4").Value + 10 'Thefirst set always ends after the value of L4+10
NumberSets = Range("L7").Value 'number of times I need the loop to work
count = 1..........................
View 2 Replies
View Related
Mar 26, 2014
There were 2 macros. One printed all of the defined ranges (40) on separate pages, and the other printed all the graphs ("charts" - 39) on separate pages. I tried to combine the VBA code to print each range and then the corresponding graph. Everything is still on separate pages, but it saved time because I didn't have to collate after printing. It seemed to work. Then I tried figure out if I could print them all to a specific tray of the printer as set in the workbook or as the printer default. Now both the combined macro and the original macro are giving errors.
Is the code I have correct to do what I am trying to do (print each range and then the graph all on separate pages)? Is there any way to put the output tray choice into the macro?
Sub Load_Data_Report()
'
' Load_Data_Report Macro (print all tables & graphs)
' Macro recorded 12/21/00 by xxx
'
' Keyboard Shortcut: Ctrl+j
'
[Code] ........
View 1 Replies
View Related
Jan 10, 2014
I have a perfectly working pivot table and I would like to make some graphs based on the report filter. My report filter has 4 categories, with each more than 10 sublevels.
When I make one pivot graph/chart, this goes fine, the data is ok, and I am happy. But one I make a second, and thus adjust the report filter, the first graphs changes according to the filter. I dont want that to happen
Ultimately I would like a powerpoint presentation with multiple charts, based on one table, with different report filter filters. Updated ONLY on the values, not the filter.
View 4 Replies
View Related
Jan 1, 2008
I have about 30 sheets with 500+ rows of data in each, with each row of data in the sheet needing to be plotted individually against the same y values. Is there a way to automate this with a macro? I have recorded a macro for an individual graph but don't know how to tell it to loop and go to the next row of data for the x values while keeping the y values constant.
View 3 Replies
View Related
Mar 20, 2007
How can I make batch changes to graphs in the same excel workbook (but on different worksheets?)?
In particular, if I have a bunch of graphs, how can I make bulk changes to color, size, axes titles, etc.?
View 9 Replies
View Related
Nov 21, 2008
I'm currently struggling with Excel 2007 and I need to produce a seriation graph. I've searched the web and did a search here and no luck.
Is it even possible to graph data using the a seriation graph in Excel?
If so, How?
View 8 Replies
View Related
Dec 7, 2009
I have created a series of numbers using a column 'n' and 3 cells for Start value, End value and increment, this is thwe formula: .....
View 9 Replies
View Related
Dec 18, 2011
I am creating a spreadsheet system for storing school grades, and I have a sheet on my system which shows graphs of the students data, and on this sheet there are rather a lot of graphs, and its sort of a visual overload to see so many graphs on one sheet. Im just wondering if there is any thing which I could insert which would give the person using the system a choice of which class's graph they want to show.
View 1 Replies
View Related
Mar 16, 2007
how do i size column graphs equally? so one graph doesn't look bigger then another... or out of place compared to the other column graphs i have...
View 9 Replies
View Related
Feb 23, 2008
I have sort of a weird request. I've got a chart with data on a patient with a sleep disorder and was hoping to create some charts based on the information I've gathered. For example, I've got a column with the amount of time before she falls asleep and another column with a type of food listed. I want to see if there's any correlation between these two variables. What would be the best type of graph to do this, and what formula would I use?
View 9 Replies
View Related
May 3, 2006
I am making an excel program that performs a series of complex calculations then produces several charts of the output. I have the output in a table of a known lenght and width. The problem comes when attempting to create the graphs, I first delete all the old graphs and make new ones. Then I try to add the series to the graphs. I want the graph to be one column vs another column but I have only been able to get it to graph a column vs 1, 2, 3, ect.
how to set the x-axis source data for a given series.
View 9 Replies
View Related
Jun 15, 2006
I have two seperate graphs in two different workbooks. Both graph's are identical in the setup, they have the same X axis and Y axis value. They are identical in every way except for the varying in percentages. This graph was originally setup in that it would calculate the results for a period of a week at a time. Is there a way to merge the two graphs thereby showing the results for a two week period?
View 4 Replies
View Related
Jun 30, 2006
I'm trying to make alot of graphs(400) and I'm not really sure where to start but here with what I've got so far.
Sub macro2()
Dim x As Long, t As Long, y As Long, z As Long
y = 3
z = 5
x = 4
While x < 1000
With Worksheets("cabernet (2)")
t = Cells(x, 1).Value
Charts.Add
ActiveChart.ChartType = xlLineMarkers
ActiveChart.SetSourceData Source:=Sheets("cabernet (2)").Range("By:Hz"), PlotBy:=xlRows
ActiveChart.Location where:=xlLocationAsObject, Name:="Cabernet (2)"
ActiveWindow.Visible = False
ActiveChart.HasTitle = True
ActiveChart.charttitle.Text = " " & t
Windows("complete Favorite Genes.xls").Activate
y = y + 3
z = z + 3
x = x + 4
End With
Wend
End Sub
I don't really know if putting a variable directly into a range works, so far it doesn't.
As you can tell I need a line graph of the range B3:H5, then the next is the those same columns but 3 rows down, so the next graph is at B6:H8. I'd also like to through in a title here, but I may just be playing with fire. The title is located in column A starting at 4 and corrosponds with each graph, so it too goes is increments of 3, i.e., the first title is at 4 the second at 7 the third at 10. Somebody help me out this isn't working very well at all.
View 5 Replies
View Related
Jul 8, 2014
I have a data which has a start time, end time, Stay Time(End-Start) and # of subjects. I am trying to create a graph, line, bar or histogram which shows how many subjects were there at a specific time. So the horizontal axis would have time from 00:00 to 24:00 and vertical axis would have the total # of subjects or the %.
Start End Subject Stay
01:00 02:00 1 01:00
01:00 01:45 1 00:45
02:00 21:00 1 19:00
03:10 14:10 1 11:00
The data set is huge(27000 rows) and I am using excel to create a graph.
I have tried using line plots and bar charts(stacked) but couldn't. I am not sure if there is an easier way to do it .
View 4 Replies
View Related
Feb 16, 2009
I have a graph, that I would like to be able to copy from one sheet and paste into another, is there away of doing this without dropping the data i.e. every time I copy and paste the graph clears, I don't want to copy the spreadsheet data as well as the graph is purely for a visual
View 3 Replies
View Related
Aug 12, 2009
I'm knocking up a spreadsheet that deals with expense claims for a small company. Under the Reason column you pick an expense type from a drop down list. What I'd like to be able to do is to set up a graph or table that can identify how much is spent on the different things. As there is a drop down menu system I'd like the worksheet to be able to differentiate the expense types and generate a total balance for each. Enclosed is an example of the spreadsheet.
View 2 Replies
View Related
Apr 24, 2014
I have this following code to create the PPT with a specific template. But in this, the first slide of the PPT are coming blank. How to remove those blank slides?
PHP Code:Â
Sub CreatePowerPoint()Answer = MsgBox("Are you sure you want to continue?" & vbNewLine &Â
"Clicking 'YES' will create the DU Dashboard PPT" & vbNewLine & "You may want to set the range & Update VOC graph",
vbYesNoCancel + vbInformation, "Warning: DU Dashboard graph")If Answer = vbYes Then Else Exit SubÂ
'Add a reference to the Microsoft PowerPoint Library by:    '1. Go to Tools in the VBA menu    '2. Click on Reference   Â
[Code]...
View 9 Replies
View Related
Feb 21, 2014
So I have lets say 3 workbooks and on each first tab of that worbook there is a (pivot)graph. Now what I would want is VBA code which opens these excel workbooks, then copy the chart and paste it into a powerpoint presentation each chart on a new powerpoint slide. So it can be rather basic. A loop which goes thru excel sheets and always takes the chart on the first tab. I see a lot of different code but not what I really can use for powerpoint thru excel vba.
View 2 Replies
View Related
Mar 13, 2014
I have a 8 pivottables with a graph for each. is there a way that i can have a dropdown menu to select which graph to display instead of having all these graphs everywhere....
View 4 Replies
View Related
Oct 11, 2008
I have multiple graphs that read from rows varying in length from 2 to 60 columns long, depending on user input. I need help in creating a macro that readjusts the graphs to read from smaller/larger data set.
I created one that said: If user input = 1, then set graph to (A1:A1), If user input = 2, then (A1:B1), but this is really inefficient. Is there a better way?
View 11 Replies
View Related
Mar 15, 2009
My macro suppose to loop on every charts in the workbook and change them to pictures , I'm using the Pastespecial method to do it but sometimes I'm getting a 1004 error in the line that do the paste command. Is there is a better way to do it? ..........
View 11 Replies
View Related
Mar 20, 2009
I have a document that is a question and answer (an audit check sheet). Based on how the questions are answered, I need to have a bar within a graph change colour.
Is this possible ? Im not sure if we can use conditional formating or programming to amend a graph.
Would i need to use conditional formatting or vba/macro ?????
I have attached the document with a more detailed outline.
View 2 Replies
View Related
