I currently have a 70 page spreadsheet with similar data that needs representing in pie chart format. All the column headers are the same and I only need 2 columns (A and T).
There are however different numbers of rows. Is it possible to write a macro to detect the number of rows before it draws the relevant pie chart (I've managed the pie chart bit!!)
See attached example, same concept but cant post real data.
i have attached a sheet where I have 4 graphs on one sheet. I prefer this to an overlay. I would like to add a 5th graph but it would make all the the graphs too small. Is there a way to make the graph background longer. For instance, extend the length of this so that I can put multiple graphs on it and then just scroll from top to bottom to review them? Also, how do I copy and paste these individual graphs into a newly created graph. copy/paste doesn't work on these?
Boiler.xls‎
I am trying to copy a group of six graphs from one Sheet "Charts" and paste them in another Sheet "FinShots" in the same Workbook. I have grouped the graphs and named the group "FinShots1".
But I can't seem to write a code that will copy group "FinShots1" from "Charts" and paste in "FinShots".
I am currently working through data received from several experimental runs I have done for my masters studies (In chemical engineering). I need to create a chart for every experiment but coding the macro to do that has been near impossible. I have the file with the first graph drawn but I dont know how to post it.
I know it will be possible to draw every chart by hand but I am waiting on another 300+ data sets and then the amount becomes crazy.
I would like to create 2 graphs for each set of data in my worksheet. the first set of data that I would like to create a 2D line chart for is in cells AQ3:AS19 (not sure if that is the correct syntax??) and the second is AW3:AY3.
I would like to position the first chart (top right corner) at BA3 and re-size it so that it is 17 cells tall and 7 cells wide. the second chart should be positioned at BI3 and the same dimensions.
I would like to delete the chart legend for both graphs
then I need to repeat about 1000 times. Each new set of data starts 20 cells lower (ie. AQ3, AQ22, AQ41..). Or every time "Band" is found in column AP.
see attachment.
I am looking a macro that will create as many graphs as there are counties (column a) in the data range (A4:N89 for this example). There could be a maximum of ~3000 counties, which would place the data range at roughly excel's limit (A4:N65000).
In any case, the graphs would take data from column F and look like the 3 graphs i have provided in the attachment. The graphs are simply graphing share for the top 25 lenders in each county. So, for example, Texas contains 254 counties--I would like a macro that creates 254 graphs, one next to the other, starting at cell O4 through column IV4 and then repeating at O22 through column IV22 and so on, until all the graphs for each county in the data range are created.
Also, would it be possible, just as in the attachment, for the macro to change the color of the data bar associated with a particular lender, in this case JPMORGAN CHASE BANK? In the attachment, I made the three bars associated with JPMORGAN CHASE red. If there is a county in which this particular is not in the Top 25, then all of the bar colors in the graph remain blue.
Would it be possible to do the exact same (macro that graphs off the pivot table) but include the data for the Top 25 Totals, Non-Top 25 Totals, and the County Total?
In other words, the graphs would look exactly as they do now, but, for example, the first graph would contain data from F5:F32 rather than just from F5:F29. Furthermore, the graph's axis label would pull from C5:C29 AND B30:B31 AND A32.
I'm pretty much a novice at Excel so obviously my knowledge is fairly limited. Basically I have created 2 sheets called 'Week 1 - By Day' and 'Week 1 - By Campaign'. The first sheet (By Day) contains data which supplies graphs to not only that sheet but also to sheet 2 (By Campaign). Sheet 2 (By Campaign) only contains graphs sourced from data within sheet 1.
So, I need to copy both of these 52 times (for every week of the year). That’s 52 x sheet 1 and 52 x sheet 2.
I have been able to copy sheet 1 easily enough by holding down the Ctrl button and dragging the sheet. This works fine and the formula and graphs within the sheet change automatically. However, the major problem at the moment is sheet 2(sheet 2 only contains Graphs which is related to data from sheet 1). When I do the same thing with sheet 2 (hold down Ctrl and drag) the graphs within the new sheet (sheet 4) are still sourcing the data from sheet 1 instead of sourcing the data from Sheet 3 'Week 2 - By Day'.
I am trying to use VB to create 50 charts each with 3 lines using data from 3 different excel spreadsheets in the same workbook. I am able to create one chart with 3 lines using data from the three spreadsheets, this is good. However I exprience problems when i try to insert a loop to create 50 charts that correspond the the rows in each spreadsheet. I am new to VB and am very inexperienced with VB. In each worksheet my data is arranged in rows. row 1 of each worksheet has the header information and rows 2 through row 50 have my corresponding data. for example A2 lists the name and F2 through T2 lists the data. I have tried a bunch of different things but nothing seems to alllow me to be able to create multiple charts which correspond to each row of data?
Sub Chart2PPT()
Dim arow As Integer
Dim acol As Integer
Dim StartPoint As Integer
Dim EndPoint As Integer
Dim rStartPoint As String
Dim rEndPoint As String
StartPoint = 2
EndPoint = 4
For arow = 2 To 5
rStartPoint = "f" & StartPoint
rEndPoint = "t" & EndPoint
Charts.Add
ActiveChart.ChartArea.Select
ActiveChart.ChartType = xlLine 'Type of graph........................
I need to make a macro that creates a specified number of graphs depending on the file's number of data sets. I know the number of sets that are in the data, and I know the number of data points that were taken. Here is what I have:
Sub Graphs()
Dim Startpoint As Integer
Dim Endpoint As Integer
Dim count As Integer
Dim xStart As String
Dim xEnd As String
Dim NumberSets As Integer
Dim yStart As String
Dim yEnd As String
Dim DataSet As Integer
Dim Data
Startpoint = 11 'The first set always starts in row 11
Endpoint = Range("L4").Value + 10 'Thefirst set always ends after the value of L4+10
NumberSets = Range("L7").Value 'number of times I need the loop to work
count = 1..........................
There were 2 macros. One printed all of the defined ranges (40) on separate pages, and the other printed all the graphs ("charts" - 39) on separate pages. I tried to combine the VBA code to print each range and then the corresponding graph. Everything is still on separate pages, but it saved time because I didn't have to collate after printing. It seemed to work. Then I tried figure out if I could print them all to a specific tray of the printer as set in the workbook or as the printer default. Now both the combined macro and the original macro are giving errors.
Is the code I have correct to do what I am trying to do (print each range and then the graph all on separate pages)? Is there any way to put the output tray choice into the macro?
Sub Load_Data_Report()
'
' Load_Data_Report Macro (print all tables & graphs)
' Macro recorded 12/21/00 by xxx
'
' Keyboard Shortcut: Ctrl+j
'
[Code] ........
I have a perfectly working pivot table and I would like to make some graphs based on the report filter. My report filter has 4 categories, with each more than 10 sublevels.
When I make one pivot graph/chart, this goes fine, the data is ok, and I am happy. But one I make a second, and thus adjust the report filter, the first graphs changes according to the filter. I dont want that to happen
Ultimately I would like a powerpoint presentation with multiple charts, based on one table, with different report filter filters. Updated ONLY on the values, not the filter.
I have about 30 sheets with 500+ rows of data in each, with each row of data in the sheet needing to be plotted individually against the same y values. Is there a way to automate this with a macro? I have recorded a macro for an individual graph but don't know how to tell it to loop and go to the next row of data for the x values while keeping the y values constant.
View 3 Replies View RelatedI have always saved each macro on a single workbook, saved the workbook using the macro name, so I can go use that spreadsheet for a specific issue. Now, however, my job role is changing to where I have to do a lot of things like get a file from Bob . . . slice and dice and then forward it on to Carol, etc. Then I have to save spreadsheet A to this directory, spreadsheet B to that directory . . . .
I am sure there is, I just can't get my head around it to have one spreadsheet that has ALL my macros that would be available to me on other spreadsheets? I tried using "show macros in all open workbooks"
I have a userform that has the same type information on 3 different entities (name, address, phone, etc). The same research is required on each one i.e. you need to look up the zip code for each). Therefore I have a bank of buttons on each page of the multipage form. Each button does the same thing depending on which page you are on. The following is my code to copy some information and open another application depending on which page you are on and which type entity.
My question is how can I combine these into one so my module is not 3' long.
If I want to create a function or sub that can be used by any userform or macro that I create for a workbook:
Where would I define that function? Within the Module?
Do I define it as Public?
I have a macro that formats an imported report and I have inserted it's code into several other routines I have written.
Since there is always the possiblity of changes occurring, is there a way to refer to this macro in a second (or third or fourth) routine so that if a change has to be made to the original macro, I won't have to change it everywhere?
I am trying to run multiple macros from multiple workbooks. I've figured out how to open each workbook, but I can't figure out how to run a certain macro in each workbook called "Main".
View 3 Replies View RelatedI have been asked to create a spreadsheet that has a front sheet where you can free type search criteria and then it will populate rows below with all search results from the remaining sheets within the workbook, for example;
In cell N15 I type the search criteria and hit a button
In cells F31-O31 it returns the following information;
CategorySub-CategoryCourseDrop Down Option 3SolutionFurther information or support
I have little to no experience in writing macros
This report spreadsheet is exported from SAP. Since SAP has a limit number of displaying the columns, there are 40 headings (= 40 columns) in the report has been broken down to 4 rows of headings.
How to use macros to move 3 those extra rows to one row and the number still matches each column? I also attatch the file for reference.
I am using the code below to open multiple workbooks in their own instance of Excel.
On my system, as well as most of the ones I've tested it on, enabling macros in the "parent" workbook, i.e. the one that contains the code, leaves them automatically enabled in the new session of Excel, as though the settings are carried over.
However, recently I've found a few systems where this is not the case. Enabling macros in the parent workbook opens the others, and then I have to enable macros again in each of the new sessions. Is there a way to fix this? All of the systems mentioned above have macro settings set to "disable with notification" and this cannot be changed.
I'm having difficulty assigning multiple macros to an active x combo box. I want a different macro to run every time the user selects a different location from the combo box. I can assign one macro to the button no problem, but don't know how to incorporate more. The two separate macros I want to run are:
Sub Atlanta()
'
' Atlanta Macro
[Code]....
I have 3 different sets of macros and i want to Join them together so i only have to run 1 macro to do all 3. I am not sure how the best way is to do this.
Code 1:
Code:
Public Function UserName()
UserName = Environ$("UserName")
End Function
Private Sub RefreshTeamQueryOnWorksheet(worksheetName As String)
[code]....
I want to be able to run this many times looping through different file names. The only thing that changes between file names is the number.
Application.Run "'C:Documents and Settingspadi4545DesktopProjectRuns10.xls'!main"
ActiveWorkbook.Save
ActiveWindow.Close
Is there a way to automate the importing of macros into a list of files ? I have a number of files that I want to add some code to and was wondering if this could be automated as opposed to adding the code to each file manually as it's going to be a regular job.
I've written a routine to loop through the list of files and open them, I just want to know how, if possible, i can automatically import the required macros.
The code from this page works perfectly when I am running one macro at a set interval: [url]
However, when I try to run multiple macros at different set intervals the order of execution gets messed up.
For example, I need macro1 to run at 00:00:30, macro2 at 00:00:45, macro3 at 00:01:00, then macro1 at 00:01:30, macro2 at 00:01:45, macro3 at 00:02:00 and so one.
I am facing an issue where my macro is unable to open multiple files and run the macros in it. Below is the code that i am using and it stops at boss1.
VB:
Sub allboss()
Call boss1
Call boss2
End Sub
[Code] .....
I have attached an example spreadsheet with two tabs. The first tab (Matrix) shows raw data scores - there are 28 measures in Column A and Participants in Row 1. There are always 28 measures but participants can vary. What I need to happen is to sort each measure in a Lineup tab i.e. rank all the participants listed in the Matrix tab from lowest score to highest score for each of the 28 measures. Obviously this can be done manually but a VBA/macro solution will be so much faster and easier. Unfortunately I have to keep the data in this format so the macro will need to transpose the data to get into the formt in the Lineup tab.
View 9 Replies View RelatedI am trying to create a Macro for taking information from a master sheet "sheet1" and dumping it into another worksheet based on a single variable in "sheet1". I have attached the excel workbook for reference. In detail, I would like to pull all of the rows where cell "F" in "sheet1" equals "1" and dump them into the new sheet titled "Dept1" with the same headings. The same for all rows where cell "F" in "sheet1" equals "2" to dump into the new sheet titled "Dept2".
View 6 Replies View RelatedI have a workbook that I would like to share and allow multiple users to add and make changes at the same time. However, the workbook is full of macros that really need to run. Is this possible? The workbook is written in excel 2003.
If this is not possible then is it possible to share the workbook in a similar fashion but not allow any other users to make changes, but update their workbook with the changes that I make?
I have 6 macros recorded and I need to create a drop down list of macros so that I know what kind of Macro I am using.
View 9 Replies View Related