I am trying to copy a group of six graphs from one Sheet "Charts" and paste them in another Sheet "FinShots" in the same Workbook. I have grouped the graphs and named the group "FinShots1".
But I can't seem to write a code that will copy group "FinShots1" from "Charts" and paste in "FinShots".
i have attached a sheet where I have 4 graphs on one sheet. I prefer this to an overlay. I would like to add a 5th graph but it would make all the the graphs too small. Is there a way to make the graph background longer. For instance, extend the length of this so that I can put multiple graphs on it and then just scroll from top to bottom to review them? Also, how do I copy and paste these individual graphs into a newly created graph. copy/paste doesn't work on these?
Boiler.xls‎
I have a graph, that I would like to be able to copy from one sheet and paste into another, is there away of doing this without dropping the data i.e. every time I copy and paste the graph clears, I don't want to copy the spreadsheet data as well as the graph is purely for a visual
View 3 Replies View RelatedIs there a quick was of copying lots of embedded graphs in powerpoint and pasting them into Excel?
View 4 Replies View RelatedI have a simple reporting sheet where the data for orders place is in one sheet and on the other sheet is an imput box for 'date' and it filters through and presents a table of data and two graphs for the date chosen.
I give a daily report (contents of this sheet) but I also need to leave this sheet available for anyone to open and change to another date.
I want to copy the repor sheet into a new one and email but I want the graphs to remain, not go blank when anyone changes the original sheet.
Excel 2007 / Windows 7.
I currently have a 70 page spreadsheet with similar data that needs representing in pie chart format. All the column headers are the same and I only need 2 columns (A and T).
There are however different numbers of rows. Is it possible to write a macro to detect the number of rows before it draws the relevant pie chart (I've managed the pie chart bit!!)
See attached example, same concept but cant post real data.
I am currently working through data received from several experimental runs I have done for my masters studies (In chemical engineering). I need to create a chart for every experiment but coding the macro to do that has been near impossible. I have the file with the first graph drawn but I dont know how to post it.
I know it will be possible to draw every chart by hand but I am waiting on another 300+ data sets and then the amount becomes crazy.
I would like to create 2 graphs for each set of data in my worksheet. the first set of data that I would like to create a 2D line chart for is in cells AQ3:AS19 (not sure if that is the correct syntax??) and the second is AW3:AY3.
I would like to position the first chart (top right corner) at BA3 and re-size it so that it is 17 cells tall and 7 cells wide. the second chart should be positioned at BI3 and the same dimensions.
I would like to delete the chart legend for both graphs
then I need to repeat about 1000 times. Each new set of data starts 20 cells lower (ie. AQ3, AQ22, AQ41..). Or every time "Band" is found in column AP.
see attachment.
I am looking a macro that will create as many graphs as there are counties (column a) in the data range (A4:N89 for this example). There could be a maximum of ~3000 counties, which would place the data range at roughly excel's limit (A4:N65000).
In any case, the graphs would take data from column F and look like the 3 graphs i have provided in the attachment. The graphs are simply graphing share for the top 25 lenders in each county. So, for example, Texas contains 254 counties--I would like a macro that creates 254 graphs, one next to the other, starting at cell O4 through column IV4 and then repeating at O22 through column IV22 and so on, until all the graphs for each county in the data range are created.
Also, would it be possible, just as in the attachment, for the macro to change the color of the data bar associated with a particular lender, in this case JPMORGAN CHASE BANK? In the attachment, I made the three bars associated with JPMORGAN CHASE red. If there is a county in which this particular is not in the Top 25, then all of the bar colors in the graph remain blue.
Would it be possible to do the exact same (macro that graphs off the pivot table) but include the data for the Top 25 Totals, Non-Top 25 Totals, and the County Total?
In other words, the graphs would look exactly as they do now, but, for example, the first graph would contain data from F5:F32 rather than just from F5:F29. Furthermore, the graph's axis label would pull from C5:C29 AND B30:B31 AND A32.
I'm pretty much a novice at Excel so obviously my knowledge is fairly limited. Basically I have created 2 sheets called 'Week 1 - By Day' and 'Week 1 - By Campaign'. The first sheet (By Day) contains data which supplies graphs to not only that sheet but also to sheet 2 (By Campaign). Sheet 2 (By Campaign) only contains graphs sourced from data within sheet 1.
So, I need to copy both of these 52 times (for every week of the year). That’s 52 x sheet 1 and 52 x sheet 2.
I have been able to copy sheet 1 easily enough by holding down the Ctrl button and dragging the sheet. This works fine and the formula and graphs within the sheet change automatically. However, the major problem at the moment is sheet 2(sheet 2 only contains Graphs which is related to data from sheet 1). When I do the same thing with sheet 2 (hold down Ctrl and drag) the graphs within the new sheet (sheet 4) are still sourcing the data from sheet 1 instead of sourcing the data from Sheet 3 'Week 2 - By Day'.
I am trying to use VB to create 50 charts each with 3 lines using data from 3 different excel spreadsheets in the same workbook. I am able to create one chart with 3 lines using data from the three spreadsheets, this is good. However I exprience problems when i try to insert a loop to create 50 charts that correspond the the rows in each spreadsheet. I am new to VB and am very inexperienced with VB. In each worksheet my data is arranged in rows. row 1 of each worksheet has the header information and rows 2 through row 50 have my corresponding data. for example A2 lists the name and F2 through T2 lists the data. I have tried a bunch of different things but nothing seems to alllow me to be able to create multiple charts which correspond to each row of data?
Sub Chart2PPT()
Dim arow As Integer
Dim acol As Integer
Dim StartPoint As Integer
Dim EndPoint As Integer
Dim rStartPoint As String
Dim rEndPoint As String
StartPoint = 2
EndPoint = 4
For arow = 2 To 5
rStartPoint = "f" & StartPoint
rEndPoint = "t" & EndPoint
Charts.Add
ActiveChart.ChartArea.Select
ActiveChart.ChartType = xlLine 'Type of graph........................
I need to make a macro that creates a specified number of graphs depending on the file's number of data sets. I know the number of sets that are in the data, and I know the number of data points that were taken. Here is what I have:
Sub Graphs()
Dim Startpoint As Integer
Dim Endpoint As Integer
Dim count As Integer
Dim xStart As String
Dim xEnd As String
Dim NumberSets As Integer
Dim yStart As String
Dim yEnd As String
Dim DataSet As Integer
Dim Data
Startpoint = 11 'The first set always starts in row 11
Endpoint = Range("L4").Value + 10 'Thefirst set always ends after the value of L4+10
NumberSets = Range("L7").Value 'number of times I need the loop to work
count = 1..........................
There were 2 macros. One printed all of the defined ranges (40) on separate pages, and the other printed all the graphs ("charts" - 39) on separate pages. I tried to combine the VBA code to print each range and then the corresponding graph. Everything is still on separate pages, but it saved time because I didn't have to collate after printing. It seemed to work. Then I tried figure out if I could print them all to a specific tray of the printer as set in the workbook or as the printer default. Now both the combined macro and the original macro are giving errors.
Is the code I have correct to do what I am trying to do (print each range and then the graph all on separate pages)? Is there any way to put the output tray choice into the macro?
Sub Load_Data_Report()
'
' Load_Data_Report Macro (print all tables & graphs)
' Macro recorded 12/21/00 by xxx
'
' Keyboard Shortcut: Ctrl+j
'
[Code] ........
I have a perfectly working pivot table and I would like to make some graphs based on the report filter. My report filter has 4 categories, with each more than 10 sublevels.
When I make one pivot graph/chart, this goes fine, the data is ok, and I am happy. But one I make a second, and thus adjust the report filter, the first graphs changes according to the filter. I dont want that to happen
Ultimately I would like a powerpoint presentation with multiple charts, based on one table, with different report filter filters. Updated ONLY on the values, not the filter.
I have about 30 sheets with 500+ rows of data in each, with each row of data in the sheet needing to be plotted individually against the same y values. Is there a way to automate this with a macro? I have recorded a macro for an individual graph but don't know how to tell it to loop and go to the next row of data for the x values while keeping the y values constant.
View 3 Replies View RelatedI'm making a Excel list for trading cards (MTG) and I've divided it into different worksheets in order to sort it by the color of the cards (not really important I guess).
The issue I have is that I want it to copy certain columns (in this case C3:C1000, F3:F1000, G3:1000 ) from almost all of the worksheets into a new worksheet where it should paste them into column A, B and C.
In two of the worksheets it's also different (C3:C1000 , G3:G:1000, H3:H1000).
I've seen many where you copy one range from multiple worksheets, and that would've been okay I guess if not those two worksheets were different. I'd prefer not to change them, and I'd also prefer if I could've gotten just the information I needed also. Is this possible to do?
Ive put some sheet code together that i need copied to 12 sheets (jan to December) in 24 workbooks (each workbook has trhe same sheet names). I dont want to alter the actual content of the Excel sheets, I just need to copy VB code from a template (in VB editor) to the 12 sheets in each of the workbooks. Is this possible to do with VB or do i need some other utility since Im using the VB editor....
View 9 Replies View RelatedSay I have 10 tables and want to copy them into one single table. Easy right? Just copy / paste.
The restraint with copy paste is, if I make an adjustment to one of the 10 tables, it will not be reflected in the master table. I would have to recopy the table every time I make a change.
I was wondering if this there was such a function that says: "Once done copying with X table, start copying Y table, and so forth."
The below code will copy data from one sheet and post to another. How can I modify this code not to overwrite existing data? I have a total of five different sheets with variable length of data and my objective is to run a macro that will capture the data from all five sheets and compile into a master sheet with loosing data integrity and not overwriting existing data.
[Code] ........
I have a series of workbooks residing in different directories which I am trying to copy into a summary workbook. At present what I did is to open the summary workbook and the individual workbook one by one and copy into the summary workbook by first right clicking of the individual workbook's name tab and select copy to copy onto the summary workbook as a new worksheet. I have about 20 individual workbook to copy and this always take a bit of time every week.
To be a bit clearer, the workbooks are in the following directories and the workbook name and sheet name are shown below. For simplicity sake I will only list 3 of them.
1. D:ContractINF00012301.xls the tab name is 2301
2. D:ContractINF0022403.xls the tab name is 2402
3. D:ContractINF00038400.xls the tab name is 8400
Basically, what I am trying to do is my workbook has 12 sheets, 1 for each month. In cell A7 on the first sheet (Jan) I would like to enter 01-01-2009 and then it add a month on each of the sheets. e.g. 01-02-2009 01-03-2009 and so forth. I know I can manually put in the first of the month on each of the sheets, just wondering if it can be automated.
View 3 Replies View RelatedIs there a way to copy a formula from Cell A1 down to A1500 withhout dragging the fill handle?
View 4 Replies View RelatedIs there a way to copy multiple ranges and paste the format in the cells below? I tried to use the Union function in the code below:
[Code]....
I was only getting the first column to paste and I don't like all of the select commands. My work around is a lot of lines for a simple command.
[Code] .........
Attached File : Stringing Chart.xlsm‎
I'm trying to copy multiple rows with a macro. Below code lets me duplicate one row at the time and the duplicate is inserted just below the chosen row.
View 2 Replies View RelatedI am doing a VLOOKUP and i need to copy it over 2000 cells, problem is when I copy it, the array changes, not just the Lookup_value
Example:
=VLOOKUP(A19,Sheet2!A2:B408,2,0)
this is the first cells equation and when i try to copy it to the next cell or do a fill it changes it to:
=VLOOKUP(A20,Sheet2!A3:B409,2,0)
Obviously the Lookup_value is doing the right thing, but the table array is not. and I know i have done this before, not sure why it is doing it now.
Im looking for a way to copy all rows with data in them from row 3 to the last row with data to another worksheet. I would like to copy the data from ALL worksheets in the workbook apart from one called Grade Boundaries.
All the sheets have the same layout. I simply want to produce a sheet with the data from all sheets in one place.
I want to be able to copy a formula to multiple worksheets that are dependent on previous worksheet.
For example:
WorkSheet 2(named week 2) the forumula in cell F7 is =VLOOKUP(E7,'Week 1'!E7:F279,2,0)
I want cell F7 in sheet 3 to be =VLOOKUP(E7,'Week 2'!E7:F279,2,0)
and so on for 53 weeks. Is there a way to do this.
Do we get the option in excel to copy from different locations (just copy a part from say Sheet A, Sheet B and some other excel file) and then pasting all at once in some other file?
View 2 Replies View RelatedI am attempting to amalgamate several (100+) spreadsheets into a single spreadsheet. The data is very simple (only three columns, several rows). I have written a simple macro to copy 5 spreadsheets (called TIMESHEET1, TIMESHEET2 etc) into 1 spreadsheet called AMALGAMATED TIMESHEETS. I would like to expand this using a FOR - NEXT loop if possible - or any other way that someone can think of! I cannot use the variable TIMESHEETx as this is not accepted......
View 9 Replies View RelatedI have a large workbook which has about 15 sheets. About half of these are template sheets which are copied multiple times within this workbook. The workbook is very large and can't be posted. I would like to hear from anyone who can give me any direction to look in given the following symptoms. The problem is that VBA code stops executing and gives a 1004 Error. *The problem is stable and reproduceable.
*It occurs exactly the same across three different computers with varying versions of Excel and memory.
*The problem is persistant beyond VBA. By that I mean if I stop the debugger and try to manually copy the active sheet, the screen flashes but the sheet is not copied. Therefore I think the 1004 error is a symptom rather than a cause
*From scratch, I get to copy 43 times before I get the error.
*If I then save the workbook and re-open (don't need to close Excel) I then get to copy another 27 sheets.................................