Open A Series Of Files Through A List Of Hyperlinks
Feb 13, 2009
This code is supposed to open a series of files through a list of hyperlinks, run a macro then save and close. But at the minute it says it cannot find the Macro and error's.
The macro is in each file named and is named 'RefreshStats', if I open a file seperately I can run the macro fine, but it can't find it through this looping code.
Another thing I found though, is that if I put a blank Module in the main workbook (that contains the list) and call this macro 'RefreshStats' the looping works fine but based on the blank macro. So this code seems to want to look in the workbook its in for the macro.
View 4 Replies
ADVERTISEMENT
May 17, 2013
i have many excel workbooks in a folder i want a macro that will get the names of all the files and make the file names so extracted as a hyperlink to open the files.
View 1 Replies
View Related
Dec 3, 2006
I would like to list all files in a directory (display the full path) and make hyperlinks to all listed files at the same time.
I came accross the code below which works well for files in a directory:
Sub HyperlinksToDirectory()
' puts hyperlinks to each of the files in a directory of your choice
' into the active sheet starting at the active cell
Dim stDir As String
Dim stFile As String
Dim R As Range
Set R = ActiveCell
stDir = InputBox("Directory?", , Default:=CurDir())
stFile = Dir(stDir & "*.*")
Do Until stFile = ""
R.Hyperlinks.Add R, stDir & "" & stFile, , , stFile
Set R = R.Offset(1)
stFile = Dir()
Loop
R.CurrentRegion.Sort key1:=R, order1:=xlAscending, header:=xlNo
End Sub
View 9 Replies
View Related
May 4, 2011
I want to open files from an excel list.
Sub Openfile()
Dim wkbOne as Workbook
Set wkbOne = Application.Workbooks.Open(Filename:=Worksheets("Sheet1").Range("A1") & Worksheets("Sheet1").Range("B1")
'where "A1" is the path where the file located and "B1" is the file name.'
End Sub
When I run this it will work, but if I change to below it won't open all file in range, what's wrong with this?
Sub Openfile()
Dim wkbOne as Workbook
Set wkbOne = Application.Workbooks.Open(Filename:=Worksheets("Sheet1").Range("A1:A10") & Worksheets("Sheet1").Range("B1:B10")
End Sub
View 9 Replies
View Related
Jun 30, 2008
I've got a string named FileList that contains the full paths of each file I need to open. It doesn't work, but this is where I'm at for the moment -
For Each File In FileList
Workbooks.Open
Next File
What do I need to put after Workbooks.Open?
View 9 Replies
View Related
Oct 24, 2007
I am trying to write a macro to open a specific file (i.e site 1) and copy a range and paste that data into another workbook (Comparisons).
I can manage to write the macro to do this one by one, but ideally I would like to write some sort of loop macro that will go down a specific range of files (column A), listing the copy range (column B), and where to paste (column C) until it hits a blank row.
That way I do not have to keep re-programming my comparison spreadsheet every time a new site opens.
View 9 Replies
View Related
Jun 9, 2009
When I click on a hyperlink inside an Excel spreadsheet, it is linked to a PDF file. When clicked, the screen flashes the Adobe Acrobat program for a split second and then disappears. But I can open the hyperlink same as which it is linked to a word file in the same directory.
I have gone into folder options and switched the PDF to open with Adobe reader 8, but that does nothing.
Any ideas of how to get the PDF to open and stay open would be most appreciated.
I tried to install adobe reader 4.0 without uninstall adobe 7.0 professional.
I use pdf reader 4.0 open the Pdf file in the window explorer, and then go to excel, open the same hypelink pdf file, and find it works now only opening pdf document by pdf reader 4.0 but not by 7.0.
But when I resinstall adobe 7.0 professional, and the problem still occurs. I have to open the original pdf file in the directory by adobe reader 4.0 again.
My case is like the following Macro in excel.
Setup hyperlink and open it . Then the problem is shown as my previous thread mentioned.
Sub Review() .....
View 6 Replies
View Related
Feb 18, 2009
I have a list of file names sans extension in column A. I want to search a folder I specify and if file is found create a hyperlink to said file either in a new cell or in column A.
The code I have does the search fine, but its hyperlinking is offset and I can’t get it to match the link to the file name.
Also it breaks if it can not find the file.
Here is the code...
View 9 Replies
View Related
Apr 14, 2009
Is there any solution to the fact that hyperlinks in excel with a # in filename wont open?
View 9 Replies
View Related
Jan 16, 2010
I am attempting to write an Excel macro that will be stored in a file called MacroFile. The purpose of the macro is to
1. Follow a hyperlink to an Excel file saved in a SharePoint type enviroment
2. Save the file to my laptop directory My Documents.
Below is the code I have written. The code is following the hyperlink and saving a file but is the focus file is incorrect.
Here is what happens:
1. Open up MacroFile and run macro
2. Hyperlinked file LinkedFile_1.xls is opened
3. File NewFile_1 is saved but contains the info from MacroFile
4. Hyperlinked file LinkedFile_2.xls is opened
5. File NewFile_2 is saved but contains the info from LinkedFile_1
6. Hyperlinked file LinkedFile_3.xls is opened
7. File NewFile_3 is saved but contains the info from LinkedFile_2
The files created are named correctly but have the wrong data in them. I need to know how to control which file is considered ActiveWorkbook.
Sub LinkAndCopy()
Application. ScreenUpdating = False
Application.DisplayAlerts = False
'**** Copy LinkedFile_1..................
View 2 Replies
View Related
Jul 10, 2009
When I add hyperlinks into excel the picture shows up by using internet explorer when I want it to use windows picture and fax viewer.
How do I change it to open in windows picture and fax viewer???
I use Windows XP professional and Excel 2003 SP3
View 8 Replies
View Related
Oct 17, 2013
I received a USB drive from a client with an Excel spreadsheet with hyperlinks to PDF's (not sure of the version it was originally created in but my version is 2007). The PDF's are in another folder on the USB drive.
The cells with the hyperlinks have a formula to hidden cells [i.e. =HYPERLINK(C17,B17)] - in column B is the name of the hyperlink and in column C looks to be the file trial to the PDF (please see attached picture).
When I select the link, I get an Alert Box stating, "Cannot open the specified file." How I can get these links to work?
Excel Hyperlinks.png
View 1 Replies
View Related
Jan 14, 2014
I need to batch open some hyperlinks from a long list of hyperlinks in my excel sheet. I would like these to each open in a new tab of my web browser. Is there a way to do this?
View 6 Replies
View Related
Jul 5, 2007
I want to allow users to place files (.jpg, .tif, .pdf, .pps etc) into a network folder and then have my program open each file and display it for 30 seconds then close the file and the application before opening the next file.
1. Set up a loop to get a directory listing of the folder and write the listing to a text file.
2. Open up the text file and get the next filename in it
3. Open the file in the associated application
4. Wait for 30 seconds (or some period of time) and then close the file
5. Repeat steps 2-4
DoIt = 1
While DoIt = 1
Open "C:TempList.txt" for output as #1
Print #1, Files In Folder
Close #1
Open "C:TempList.txt" for input as #2
while not eof(2)
Line input #2, MyFile
Display MyFile on screen
Wait for 30 seconds
Close MyFile and MyApplication that opened it
wend
Close #2
I can get the directory listing just fine with no problems
I can open the files in the associated application just fine with no problems.
with closing the application after 30 seconds or some period of time.
I need some code that will allow me to easily send it a filename and it will know how to close the file and the application that opened it.
View 9 Replies
View Related
Feb 8, 2009
I have an Excel application (Excel 2003) which is stored in the default Program Files folder by the Installer; for example: c:program fileszxchello.xls. The problem I am running into is this file opens as Read Only in Vista and this is interfering with the running of the application. There is no problem opening the file normally in Windows XP.
I have been able to narrow down the cause of this to the User Account Control system in Vista - if I turn OFF User Account Control, the Excel file opens normally and my application functions normally. Is there another option to open the Excel file without turning OFF User Account Control because some users may find it unacceptable to turn OFF this security feature. Ofcourse, one option is to install the application in another location, outside the Program Folder, and the file would open normally, but the Packaging Wizard that I am using to package the application does not allow me to install the application in any other location and thus, the application installs in the Program Folder and I am running into this problem of the Exel file opening as Read Only. Is there a way out of this situation where I can open the file normally (not as Read Only)?
View 5 Replies
View Related
Jan 26, 2013
In Excel 2007, Hyperlinks in cells pointing to jpg files in a subfolder display with internet explorer. On my WinXP/Intnernet Explorer 8/Office 2007 system these links work fine.
When sending the excel and jpg files to another person with Win7/Office 10, jpg hyperlinks work and launch Internet Explorer but come up blank. (Hyperlinks to PDF files work fine and show up in Acrobat, just the jpg's come up blank in Explorer.)
Questions:
What is causing this, a setting in Explorer/Win7 or Excel?
Can I change Excel hyperlink default software to use something other than Explorer to display the jpg files?
View 5 Replies
View Related
Sep 15, 2014
I'm trying to open multiple files based on an array of WBnames that are on a 'Dashboard' tab, but I only want to open them if they are not already opened. The code below doesn't seem to check if they are open and just opens everything....
VB:
Sub OpenWorkbooks()
Dim WorkbookOpen()
Dim WBnames() As String 'Array of WorkBooks to be Open
Dim WorkbookCnt As Integer
[Code] .....
View 4 Replies
View Related
Jul 3, 2007
I'm doing the following:
Dim myname As String
myname = Application. GetOpenFilename
I use it to attempt to open first a QuickBooks file and then an excel workbook.
The Quickbooks file opens fine. The Excel workbook never appears to open but
I do get the full file pathname to my excel workbook returned which I then
parse off to get just the workbook name.
Why would it behave this way? I open both these files manually all the time.
Also, I'm trying to use a filter as follows:
myname = Application.GetOpenFilename("*.QBW")
I get a compile error saying that I'm calling the function wrong.
View 5 Replies
View Related
Jun 4, 2009
i have a WB with over 28 sheets in is there any way of having a box wether it MsgBox or anything to give the user a choice of which sheet to goto , dont have room to add a list of hyperlinks , was wondering if this was possible atall
View 9 Replies
View Related
Oct 16, 2013
I have a large amount of sheets in a workbook (, say 70). For example:
1 GrandMastersheet of pets
.....1 Mastersheet of dogs
.................1 sheet of little dogs
.................1 sheet of big dogs
.................1 sheet of blue dogs
......1 Mastersheet of cats
.................1 sheet of black cats
.................1 sheet of white cats
.....1 Mastersheet of snakes ()
.................1 sheet of cobra's
etc. etc. etc.
The names of the sheets in the lowest level are quite long. Creating a icon with a macro/hyperlink in it is not what I want. (Boxes are too big and there would be too many boxes.)
This is what I would like: A clickable dropdownlist in the Mastersheets, that only show the lower level sheets of that category. For example:
A dropdownlist on the dogs Mastersheet that only show the words 'little dogs', 'big dogs' and 'blue dogs'. These words should be clickable and insta-hyperlinked to the specific sheet.
View 9 Replies
View Related
Apr 21, 2009
I have the code below. It openes all csv files within a folder, then delete rows depending on the value of a cell. Now it needs to save the file as a xls file ....
View 9 Replies
View Related
Jan 7, 2013
In a chart series, I have and end number for a row that I have been updating manually everytime I enter a new fuel tank fillup. Is there a simple way with the chart series to just say always go to the last data in the specified column?
See my example here, instead of the 137 in the series is there someway to just say "last data row"?
[URL]
View 1 Replies
View Related
Mar 5, 2008
I need to make a Workbook that has hyperlinks in the first sheet that links to a cell in a second sheet and then back again. The only way I have been able to do this is manually create each link in each sheet. I am hoping that this process can be automated as they can not be 'filled' as far as I can see. find attached an example of what I am trying to achieve.
View 2 Replies
View Related
Oct 18, 2008
I want to create a macro that will “open the look in list” and stop so I can pick a file to open. I’ve tried to use “record a macro” and “ctrl-o”, but the record a macro won’t stop until I pick a file or cancel the file list. I also tried to use “o” in the short cut key box
View 5 Replies
View Related
Mar 7, 2012
When I open some csv files with this code : "Workbooks.Open myDir & "" & strFilename" it will open all messy.
View 1 Replies
View Related
Aug 2, 2006
I quite often bring spreadsheets home to work on, but in the last few days it seems that any sheet with a macro produces an error message when I try to open it on my home pc.
(Excel has encountered a problem and needs to close) The files are created with excel 2003 and my home version is 2002. Previously this has not been a problem. I can still load versions of the same spreadsheet from a week ago, but not any recent sheets containing macros. Macro security is set to medium - always was.
Is there a setting somewhere that could have inadvertantly been changed that is causing this problem?
View 9 Replies
View Related
Aug 10, 2008
I was trying to read BMP file. But when ever there are NULL char in File Left,Right doesn't work. Does any one have any alternative for this. For Eg. here are first 10 bytes of a BMP file. 42 4D 4E 01 00 00 00 00 00 00 3E
Open [C2].Value For Input As #BMP_Src 'Read BMP As Input File
While EOF(BMP_Src) = 0
Line Input #BMP_Src, sTemp
While Len(sTemp)
ActiveSheet. Cells(iRow, iCol).Value = Left(sTemp, 1) 'Update readed Char
x = Left(sTemp, 1) 'Temp Var to see Char
sTemp = Right(sTemp, Len(sTemp) - 1) 'Remove Updatd Char
iCol = iCol + 1 'Update Col Count
If iCol > 10 Then 'Init Col Count
iCol = 1 '
iRow = iRow + 1 'Inc Row Count
End If
Wend
Wend
In this code after reading 4th Byte Code jump to 10th Byte. because Left, Right consider NULL as endof string. I asked this Question to know if there is any alternative way to read NULL char in VBA.
View 2 Replies
View Related
Feb 21, 2007
I have a spreadsheet and within the first sheet there are lots of hyperlinks to other cells within sheet 1 (my template).
I have made a small macro which very basically makes a copy of sheet 1 (my template)
The hyperlinks in the template are explicit and as they are copied to sheet two, they still reference back to cells in sheet 1. I need the hyperlinks to be relative, so that when I make a copy of the template the hyperlinks are copied and make reference to cells in the new sheet. I cannot work out how this should be done
View 6 Replies
View Related
Dec 16, 2008
I receive excel reports every day. But the last couple of days when downloading the reports I get them as csv. Also older reports I have saved on the hard disk open as csv.
Well, the ones I have saved have are now csv files and I haven't done anything (knowingly) to change them to csv.
View 9 Replies
View Related
Nov 3, 2008
I would like to create a button that will open a file in a location based on the date of the file. So if I click the button the file with the latest date is activated as read only. The file name is always the same except, the date is added to the file name each day.
View 14 Replies
View Related