Sub Openfile()
Dim wkbOne as Workbook
Set wkbOne = Application.Workbooks.Open(Filename:=Worksheets("Sheet1").Range("A1") & Worksheets("Sheet1").Range("B1")
'where "A1" is the path where the file located and "B1" is the file name.'
End Sub
When I run this it will work, but if I change to below it won't open all file in range, what's wrong with this?
Sub Openfile()
Dim wkbOne as Workbook
Set wkbOne = Application.Workbooks.Open(Filename:=Worksheets("Sheet1").Range("A1:A10") & Worksheets("Sheet1").Range("B1:B10")
End Sub
This code is supposed to open a series of files through a list of hyperlinks, run a macro then save and close. But at the minute it says it cannot find the Macro and error's.
The macro is in each file named and is named 'RefreshStats', if I open a file seperately I can run the macro fine, but it can't find it through this looping code.
Another thing I found though, is that if I put a blank Module in the main workbook (that contains the list) and call this macro 'RefreshStats' the looping works fine but based on the blank macro. So this code seems to want to look in the workbook its in for the macro.
I have some daily text files in a folder (so about 30 of them each month), which in the end of month, I need to open them up in excel, format them so that I can use the information for my analysis.
I would like to create a macro, to quickly open them all up at once and save them each individually in .xls or .xlsm format.
I am new to VBA and after some research online, I was able to have the files open with the following code. but now I don't know how to proceed further to save them one by one with the same name but in .xls or .xlsm format.
Sub Opentxtfiles() Dim MyFolder As String Dim myfile As String
I am trying to write a macro to open a specific file (i.e site 1) and copy a range and paste that data into another workbook (Comparisons).
I can manage to write the macro to do this one by one, but ideally I would like to write some sort of loop macro that will go down a specific range of files (column A), listing the copy range (column B), and where to paste (column C) until it hits a blank row.
That way I do not have to keep re-programming my comparison spreadsheet every time a new site opens.
I receive excel reports every day. But the last couple of days when downloading the reports I get them as csv. Also older reports I have saved on the hard disk open as csv.
Well, the ones I have saved have are now csv files and I haven't done anything (knowingly) to change them to csv.
I am using xp pro, excel 2010 and the ftp server has linux installed. To open files from server I press open button in excel, then choose ftp location from drop down menu. FTP logon box asks password with the option of default user selected. I provide password and go on.
Some days ago something happened, I don't know what but as a result of it when I opened the FTP logon box, the anonymous option was selected by default. So I selected user option, gave id password and hit ok. It did not connect. Then I removed that ftp location from excel ftp locations. Whenever I tried to add an ftp location, excel restarted stating error message " *** encountered a problem *** ". So I reached a site after some googling and was directed to add the whole ftp file location path in the "File name" box of the open dialog box. It worked and the ftp location was automatically added in ftp locations. [ any ftp setting in excel is automatically transferred to ms word as well]
PROBLEM > Now I have a different problem. I can access ftp folders and subfolders but when I select a file and click open, downloading bar at the bottom of the excel does not start and after a long wait an error message pops up " the internet address ' ftp://192.168.****/folder/subfolder/filename.xls" is not valid. [I can open ftp files using filezilla etc]
I run two monitors and am able to open different files on each monitor which is very handy.
This doesn't seem to work with Excel. If I have two different Excel files open I can only view one at a time. I can move across to the other monitor, but then can only view one at a time on that monitor - very frustrating.
When I was using Excel 2010 on my last job I was shown a clunky, round-about way of being able to open two Excel files, one on each monitor. (By opening one file, opening a new Excel document from there, and then opening the other Excel file from the new document, minimizing that file and dragging it to the other screen).
Now I am using Excel 2007 and am not able to view two different Excel files, one on each screen. how I can do this in Excel 2007?
I have a folder which has a set of files (Files may be anything like excel,pdf,word..etc).My rrequirement is: When i run the macro the first file to last file should open and wait for 5 sec and then close..I mean first time the first file should open and wait for 5 sec and close..Next 2 nd files shoul open and close after 5 sec..next third files should open and close after 5 sec...Like wise till last file..Is this possible to achive through macro code..
I would really like excel to open files in a new instance of excel by default. Currently the only way I can do this is by starting excel and then File->Open. While this is only a little bit of extra effort, I've recently gotten in the habit of opening and closing 100s csv files daily and the wasted time really adds up. I've read several threads here, but mostly found people trying to accomplish the opposite of what I am.
I have been opening files from another application which opens the files in memory as .XLS. I have not saved these to my PC. Is there VBA to merge all open .XLS files into another Workbook - preferably .XLSX.
I'm using 2003 (I know!) version & I can't open excel files directly by clicking on them. I get an "error in sending command" message. I can circumvent problem by opening Excel & then opening the relevant file, but this sometimes causes me problems.
Is it possible to protect an excel file such that it will open up only on designated computers (identified by the computer name or some unique hardware identification like MAC address etc)?I was wondering if the VB editor can be used to do the same.
Let me put my requirement in detail:
I have an excel file "123" created in one computer (named=A). On this computer this file can be opened by anyone.I write a code such a way that, this particular file when copied on to other computers say (B,C & D) would open up as usual. But on computer E or any other computer, it should not open.
I cannot use password protect feature on the file as "n" number of users will be accessing this file on those designated computers. I was finding few of the clients copying the files on their personal drives or email without proper consent.If its possible, I would like to employ the same on few of my word (.doc) files as well.
I have a requirement to search workbooks in a particular folder with specific string in file name. For example, let us assume I need to find a file which contains the name 'RR' in it. The position of 'RR' will vary with files i.e. 'RR' might be present either in the beginning, middle or at the end of file name. All I wanted is to search for file with 'RR' and do some activity and close the file and then goto next file. Similarly, the next search has to be performed with the files containing the name 'BB' in it.
There is a folder with all excel files with the same structure. I need a macro, who opens one file by one in a folder, change the layout, and save it too same place with same name. Changing the layout will I do with macro record.
Sub AllFiles() Dim MyFolder As String 'Path containing the files for looping Dim MyFile As String 'Filename obtained by Dir function Dim MyBook As Workbook MyFolder = "D:LABODIESTSOST_DIEST" 'Assign directory to MyFolder variable
Is there a way to open a text file from Excel 2010 and specify that I want it in .xls format?
I am working in compatibility mode, and expected that when I opened a text file from code within an xls file, the text file would have 65,536 rows, but it has 1,048,576. This causes a problem when we try to copy the sheet with the data from the text file, and insert the sheet into our xls workbook. See code below. The error is: Run-time error '1004': Excel cannot insert the sheets into the destination workbook, because it contains fewer rows and columns than the source workbook..
I know I can get the data other ways (such as copying and pasting only the cells containing data) but I was hoping to make minimal changes to the code below as I will have to make it across several templates. Specifically, I was hoping that there was a qualifier I could add to the Workbooks.OpenText statement after "Tab:=True" - Perhaps something about opening the text file in File Format 56. However I have not been able to find out how to do that.
VB: Sub openfiles()Dim Path As String Dim ExcelFile As String ' Path = GetFolder("C:UsersKinteshDesktop") Path = "C:UsersKinteshDesktopVBA programmingMaps" ExcelFile = Dir(Path & "*.xls")
[Code] ....
NextCode: GetFolder = sitem Set fldr = Nothing End Function
My problem is that the code all actually works (including the function and when I use the commented part), but pointing to this one specific directory (the one I'm using right now), literally nothing happens.
In my search I found several example similar to what I need, but nothing I could adapt to filt my needs, (at least not wim my limited skills).
Here what I need to do:
I have multilple Excel files in a directory. (M:/Archived PO Responses/Domestic). On a daily basis, these files are processed via VBA, and deleted after processing. What I need to do is, prior to processing and deleting these files, create an ongoing log of the filenames in that directory.
Example:
The macro would open an Excel file named "Processed Orders.xls", which is stored on the network drive "M:". It would then append all of the filenames in the directory mentioned above to a sheet named "Processed Orders" in that workbook, below any filenames that already exist.
I want to allow users to place files (.jpg, .tif, .pdf, .pps etc) into a network folder and then have my program open each file and display it for 30 seconds then close the file and the application before opening the next file.
1. Set up a loop to get a directory listing of the folder and write the listing to a text file.
2. Open up the text file and get the next filename in it
3. Open the file in the associated application
4. Wait for 30 seconds (or some period of time) and then close the file
5. Repeat steps 2-4
DoIt = 1 While DoIt = 1 Open "C:TempList.txt" for output as #1 Print #1, Files In Folder Close #1
Open "C:TempList.txt" for input as #2 while not eof(2) Line input #2, MyFile Display MyFile on screen Wait for 30 seconds Close MyFile and MyApplication that opened it wend Close #2
I can get the directory listing just fine with no problems
I can open the files in the associated application just fine with no problems.
with closing the application after 30 seconds or some period of time.
I need some code that will allow me to easily send it a filename and it will know how to close the file and the application that opened it.
I have an Excel application (Excel 2003) which is stored in the default Program Files folder by the Installer; for example: c:program fileszxchello.xls. The problem I am running into is this file opens as Read Only in Vista and this is interfering with the running of the application. There is no problem opening the file normally in Windows XP.
I have been able to narrow down the cause of this to the User Account Control system in Vista - if I turn OFF User Account Control, the Excel file opens normally and my application functions normally. Is there another option to open the Excel file without turning OFF User Account Control because some users may find it unacceptable to turn OFF this security feature. Ofcourse, one option is to install the application in another location, outside the Program Folder, and the file would open normally, but the Packaging Wizard that I am using to package the application does not allow me to install the application in any other location and thus, the application installs in the Program Folder and I am running into this problem of the Exel file opening as Read Only. Is there a way out of this situation where I can open the file normally (not as Read Only)?
Is it possible to do a seach in a lot of excel files (>500) to find the excel files wich have an embedded objects inside. If so how can I do this with VBA ?
I'm trying to open multiple files based on an array of WBnames that are on a 'Dashboard' tab, but I only want to open them if they are not already opened. The code below doesn't seem to check if they are open and just opens everything....
VB: Sub OpenWorkbooks() Dim WorkbookOpen() Dim WBnames() As String 'Array of WorkBooks to be Open Dim WorkbookCnt As Integer
My problem is to create a macro that will list all folders, subfolders and files in an order in excel. So that I know which folders and files belong to which main folder, more like a hierarchy.
For example, Sourcefolder Subfolder 1 File1
I have code that list all files in folders and subfolders, but it does not put them in a hierarchy fashion.
Dim myname As String myname = Application. GetOpenFilename
I use it to attempt to open first a QuickBooks file and then an excel workbook. The Quickbooks file opens fine. The Excel workbook never appears to open but I do get the full file pathname to my excel workbook returned which I then parse off to get just the workbook name.
Why would it behave this way? I open both these files manually all the time.
Also, I'm trying to use a filter as follows:
myname = Application.GetOpenFilename("*.QBW")
I get a compile error saying that I'm calling the function wrong.
I have the code below. It openes all csv files within a folder, then delete rows depending on the value of a cell. Now it needs to save the file as a xls file ....
