Suppose in a work book I have a list for data in 5 rows.
1
2
3
4
5
Is there a way to randomize the data with one created button click (like hyperlink button used for linking) so that it may show any random output like 2,1,4,3,5 etc. Next time another click on randomize button creates another set of totaly random order of the 5 data sets.
Running into this issue of "transworksheet macros"
I have a master "update" commandbutton on sheet 1. I have two sub "update" buttons on sheet 2 and 3 respectively.
What I would like to do is have the user click the master button, that would "click" the two sub buttons so they run their respective macros on their respective worksheets (within the same worksheet.
I have tried pasting the macro code in the master button, telling it to select the sub worksheet and then run the macro, but the marco runs itself on the master worksheet instead.
I need to get the data from the sheet 1 added to the sheet 2 by clicking on the ADD DATA button in the sheet 1. The sheet 1 will be filled in multiple times like a form by the users, so once the data is added to the sheet 2 I would like sheet 1 to have no data filled in the column to the right. The data will be only filled in the right column, thus the left column should not be copied to the sheet 2.
View 1 Replies View RelatedThis is the macro I am using
Sub Macro3()
'
' Macro3 Macro
'
Range("C2").Select
Selection.Copy
Sheets("Table").Select
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(1, 0).Range("A1").Select
[Code] .....
It does everything I want but take F2 info and send it over. But F3-F6 does go over.
My program(which is an add-in, or will be when I've finished writing it) creates a new worksheet called "Groups Summary" I would like this sheet to be locked so that the user can not modify anything on it. I would also like that if they double click a cell this will launch a userform if based on certain conditions.
I believe this code would have to go in the worksheet itself, so the question is how do I get the macro to enter code into a worksheet that it creates?
Is there a way to write it in a standard module and then automatically copy it when the worksheet is created?
I have created a userform and a command button to bring up the user form but when I click on the command button and the user form pops up I am not able to enter any data, the entire page freezes
This is the code
Private Sub CommandButtoncancel_Click()
unloadme
End Sub
Private Sub CommandButtonOK_Click()
With Workbooks("RETS results version 2.xlsm")
[Code] ......
what code I can put behind a button so that once I click on that button,
What ever cell i click on, the whole row of that cell will be colored a certain color.
Is this where i would used a target approach?
I have a userform that has one combobox at the top created manually. When the userform is opened, the user select an option in the combobox (these options are taken from a range on 1 worksheet). From the selection of the combobox, I use the comboxbox's change event to create and display 5 columns of textboxes and 2 columns of command buttons on the userform.
The number of rows of textboxes created depend on the option selected from the combobox since each option links to a different range of cells. Each of the 5 textboxes in each are set to be ".enabled = False" and display text as per the cell values within a range on another worksheet. 2 Columns of command buttons are created at the end of each row of textboxes - 1 is enabled and the other is not.
The creation of the textboxes and command buttons works as required. However, I am having problems with setting click events for each command buttons. When the 1st column of Command buttons are created, I need the click events to be created and filled out with 2 actions:
1. Enable all textboxes in the same row as the command button
2. Enable the other command button in the same row.
Here is the code I have so far that creates the textboxes and command buttons.
Each of the 5 textboxes and 2 command buttons have a unique name so the 1st row will have textbox and command button names of cTxtA1, cTxtB1, cTxtC1, cTxtD1, cTxtE1, CmdAmend1 and CmdConfirm1. The 2nd row will have the same names but with 2 on the end and so on. The bold sections is the code for the creation of the command buttons that I want click events for.
Code:
Private Sub CboTeamSelect_Change()
Application.ScreenUpdating = False
If CboGroupSelect.Value = "" Then Exit Sub
Dim cTxtA As Control, cTxtB As Control, cTxtC As Control, cTxtD As Control, cTxtE As Control
Dim CmdAmend As Control, CmdConfirm As Control
Dim iNum As Integer
Dim TxtTop As Long
[code]....
I need to randomize cell ranges A2:F51 across the rows. I don't want data to be randomized in any other way then across rows. Is this possible to do. I have found many apps that make this possible, however I don't know how to incorporate this function into my macro.
View 8 Replies View RelatedI currently am using a form button to create new rows.
I need two different kind of buttons. I have a button that does this-
VB:
Sub InsertRow()
'this inserts a row where the button is clicked.
Dim r As Range
[Code]....
However, when I try and create these codes using a Command button (I need it for the color), I get the error
"unable to get the buttons property of the Worksheet class"
P.S one other thing, say the button is in row 3, and Cells A1 and A2 are merged, when you click the button in row 3, it should extend the merge to A3.
I'm working on a Tool, where every change should be saved in a new Version. So if the user changes any number, he should click my selfcreated save-button, which takes todays date in the filename (no problem so far).
I tried to disable the "normal" save-button with:
Code:
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
Cancel = True
MsgBox ("saving cancelled!")
End Sub
Unfortunately this code won't allow my own button to save too. Is there any other way? Maybe sth like if "normal" saving is used, then automatically activate a makro (which is also on my button) instead of just saving?
I have an Excel table with 7 columns. I have used a formula to randomize the data in each column, and it works fine, accept that it resorts/re-randomizes the contents of the table every time data is entered anywhere in the workbook. I would like the data to be sorted/randomized only once, and then only again upon pressing F9, since I have other spreadsheet which reference the data in the table.
This is the formula I use to sort/randomize the data, and I am using Excel 2010 on a PC.
=VLOOKUP(SMALL($C$2:$C$20,B2),($C$2:D20),2,FALSE)
Column B = numbered 1 - 20
Column C = =RAND()
Column D = last of names
Column E = sorted/randomized list of names.
I created a button that I have created from a form but I cant seem to delete it or cut it. It just remains there, is there any way out of this?
View 9 Replies View RelatedI am creating controls on a Userform on the fly. A shortened example of my code to create a button is below:
Set BtnEdit = .Controls.Add("Forms.CommandButton.1", "BtnEdit", True)
With BtnEdit
.Left = 220
.Top = 85
.Width = 50
.Font.Underline = True
.Caption = "Edit"
.Enabled = True
End With
What I want to do is assign a pre-existing sub-routine to the button, at the same time as I create it. I have tried using
.OnAction = Mysubroutine
I have created a button name "Add Power Source" on excel sheet that adds a table and a button(named "Add Row") to the sheet.Whenever the user clicks the "add power source" button a table and a "Add new row " button is created .This "Add new row" button is used to add rows to the table.
Now suppose the user has pressed the "add power source" button 5 times,so that there will be five table on sheet and each having a "add new row " button associated with it.When the user wants to add a new row to the table 2 say .How will I come to know in which table the rows are to be added using VBA.
how to change the color of a command button created by using the control tool box
View 2 Replies View RelatedI am using a worksheet to scan or enter students into a school event and determine their eligibility to participate in the event. Everything is working great but I need to do the following on Enter Student button click:
1) Cut scanned value (ID number) from input Cell A1
2) Paste value into next empty cell in column A (Rows build as students are inputted)
3) Copy Eligibility status (text) from column F into A6
I have a limited VBA/Macro background and have NEVER got a button to work.
I have this workbook with 10 sheets. Each sheet has macros that are called from a floating toolbar. What I am trying to do:
I want to create a msgbox that warns me when I click in a toolbar's button to call a macro that not runs in the activesheet. Something like: "This code (or macro) doesn't match (or run) with the active sheet.
Is there a way to add a new sheet as soon as click on button on excel sheet with the name i give.
ex : there should be a button on the Index page , as soon as i click on button it should add a new sheet and i should be able to provide a name in the index page for that sheet.
I have many workbooks that I receive from clients I run various Excel VBA macros on depending on which workbook it is, and I need to automate all of this so that anyone can run an simple .exe user interface designed in VB 2005 Express Edition where when that interface is run, a window opens on the destop with a collection of buttons, when the user clicks one of the buttons, Excel launches, loads the appropriate file and runs an already-existing appropriate Excel macro, then some file maintenance is done, like moving a group of files from one subdirectory to another.
View 9 Replies View RelatedI am using VBA to pull a web query to get sone info from an intranet site.
Unfortunately, the data it pulls is usually old. I've found the only solution is to open a browser manually and to click the Reload button on the web page then navigate back to my workbook and run it again. Then it will pull the most up to date info.
I've tried several ways of forcing a refresh of the data, but have not figured it out yet.
I have been trying the past couple of hours to use the send keys button to tab down to the button on the page I need and to hit enter, thus forcing a refresh, but I can't seem to get that to work either.
On a spreadsheet I have a button which has a macro assigned to it, for some reason when I protect the worksheet then then click the button, nothing happens (or though I do get egg timer for a second). but when I unprotect the shet its fine.
ive used this type of method many tiems, and cant see what the problem is, have tried all combination of locking and unlocking cells in and around etc, but nothign changes it.
I have a spreadsheet with 6 buttons on it. Ive been using the code from Daves Download Page to log users of the spreadsheet, however im now want to log which button is being clicked the most. Is this possible? Ive tried to do it myself, by adding a hidden sheet, and adding code to each button to add a line to the new sheet each time the button was clicked etc, but faield miserably.
View 2 Replies View RelatedIs there any way, through VBA code, to click a button on a sheet in another workbook. This button has a macro assigned to it. What I need to be done is this :- the workbook which has the button is open. The code should click the button on a specific sheet. On this action, the macro assigned to the button should get called.
I could just call the macro which is assigned to the button in this code. But the requirement is that the button click operation should call the macro.
I have found that one can do quite a lot with the code, but this seems to be one a whole different level. I came across a possible solution in the below mentioned link but it doesnt seem to be working for me. [URL]
I need to capture / record a cross country race results in excel. Is the a code already available to log time (per click / press enter) as the runners complete the race and capture their time...?
View 1 Replies View RelatedI have the following code:
[Code]......
Each macro is assigned to its own button, Clear and Restore. What I'm trying to do is make it so that the macro attached to the Restore button will not activiate unless the Clear macro attached to the Clear button is clicked first and visa versa. I can't see to find anthing quite like it in my research.
I've been looking for a way to save a worksheet as a PDF document and place it in a folder in Documents.
View 4 Replies View RelatedI am looking at designing a simple radio button system which allows me to fill an adjacent cell with values from a certain column - so in the example, column C is the total value, and columns D-F will ideally have a radio button which a user can just click to select the value.
View 4 Replies View Relatedonce the command button on sheet 1 is clicked, a input box appears which asks "has this number been entered" and has a place to enter a number within the input box.
Once the info is entered in the input box, it searches through sheet 2 for the number. If the number is found, I would like for a box to pop up with the number found and the name that is next to the number from sheet 2.
If the number is not found, I would like for a box to pop up and say "number not found"
I have a User form which had a button which redirects me to a certain sheet, e.g. If I wanted to go to stock sheet I would click cmdViewStock and it would open the stock worksheet meaning it works, but the userform still stays open. Is there a way in which once I click the cmdViewStock it opens the Stock worksheet but closes the userform automatically straight after?
Here is the current code I have for the button:
Code:
Private Sub cmdViewStock_Click()
Sheets("Stock").Select
Sheets("Stock").Range("B4").Select
End Sub