I want to lookup for 160990 (B12), and if the value is found, I want the values returned to be the ones in A9,B9,C9. But when I lookup 00002 (B17), the values returned to be the ones in A15,B15,C15.
I have ~200pages, but I don't need all the data, I only need to lookup some values I already have in another Excel file. I have a weird format because I converted the file from a PDF.
I have a situation where I have about 20000 lines to populate and looking for a quicker alternative. I have duplicate numerical values in the lookup_value. I want the same number to appear for all lookup_value's but there is only one instance of that value on the other sheet I am searching. My table looks like this:
lookup_value
50058459
50058459
50058459
50058459
68594523
68594523
68594523
58965214
Table_array
Column A Column B
50058459 1234
68594523 9876
58965214 3456
I want my output of vlookup to look like this
Column A Column B
50058459 1234
50058459 1234
50058459 1234
50058459 1234
68594523 9876
68594523 9876
68594523 9876
58965214 3456
I would like to ask regarding checkbox checking. I have 1 master checkbox and 3 sub checkboxes on the userform, and my target is that if the master checkbox is selected then I want to receive a msg if one of 3 checkbox are not selected when I hit the "Confirm" commandbutton.
View 3 Replies View RelatedI have created a search all sheets function in VB in excel in a Module. All results are populated to a listbox in a userform.
What I want to do is, as soon as I select 1st result in the listbox, it must Jump to cell where the result was found.
If need be, I can mail you the excel sheet.
way to generate automated email whenever excel file is updated by any one.
View 14 Replies View Relatedi have the following kind of table
Raw Material ReportDateDetailOrder Given Received Opening Balance25-Oct-07order to Johson50029-Oct-07Receive from jonson10014-Jan-08Receive from jonson 5405Pending sum500505-5
as you can see that the pending order (receivable from johson) is -5 as we reveive more then order given.
i want here that when we receive more than order as in this table the pending must be shown 0.
i can do it by apply the condition when pending is
When the workbook opens, sheet 1 is selected. There is an activex textbox on sheet 1 that should receive focus.
using "textbox1.setfocus" or textbox1.activate" does not accomplish what I need. I have also applied this the setfocus and activate to the worksheet open event but without success.
VB:
Private Sub workbook_open()
Worksheets("regular sku").Select
TextBox1.SetFocus
Worksheets("regular sku").ScrollArea = "I1:T36"
End Sub
I have a table with data in 2 different columns. In the first column there are names of companies given to me by an outside source and they are labeled according to the way this outside company labels them.
In the second coulumn, There are names of the same companies, only this time they are labeled according to the way my company labels them.
I would like to use a formula or any excel function to find when the company name in the first column is at all different from any name in the second. If the name is different, I would like to receive an alert message, or just fill the cell red if it is easier.
I am trying to run the 'loop through a folder' code on multiple workbooks I receive.
The workbooks I receive are full of drop downs that have associated values of 1-3 on the first sheet. (About 100 in total) This particular workbook has the drop downs on one worksheet and the numeric results on another worksheet 'Results'
The second workbook 'Totals' (very basic) , just referenced each 'Results' worksheet and had equations that averaged all the drop downs cell by cell.
I would love to be able to use the 'loop through a folder' code to open them and then average them on the 'Totals' sheet. The main reason is that I am delegating this to another person and would like to eliminate the risk or human error. ( unless it is my own)
I am a total VBA n00b. Any assistance would be appreciated.
If needed I can upload the code or sheet as an example.
The base folder would always be the same. ie c: estresults*.xls
The naming would be very similar.
This loop code seemed relevant as it did not seem to require any file naming and would run through a folder and process all XLS files.
[url]
Right now when I send/receive an HTTP request, I have the text displaying in a MSG Box. I want to just have the text inserted into cell A1 instead. I know I have to alter MsgBox MyRequest.ResponseText, but anything Ive altered it to, doesn't seem to work.
Code:
Sub http()
Dim MyRequest As Object
Set MyRequest = CreateObject("WinHttp.WinHttpRequest.5.1")
MyRequest.Open "GET", _
"Google"
' Send Request.
MyRequest.Send
'And we get this response
MsgBox MyRequest.ResponseText
End Sub
I want to create a communication excel sheet. I want it in such a way that if any one of the team member make update and save the file, then the whole team should receive an email that the file has been updated.
View 9 Replies View RelatedThe code below works nicely to insert a time stamp in column B when the user selects "Yes" in the corresponding cell in column A. The problem is if I try to delete any rows or clear the contents of the cells I receive a "Run-time Error 13 - Type mismatch." If I delete the contents of the cells one at a time I do not receive the error. What I am trying to do is the user has a list of items to select from in column A. Only if "Yes" is selected I want the time stamp in column B to appear.
Code is below.
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
With Target
If .Value "Yes" Then Exit Sub
If Not Intersect(Range("A1:A50"), .Cells) Is Nothing Then
Application.EnableEvents = False
With .Offset(0, 1)
[Code] ......
I am trying to find some missing values compared to 6 base values. For instance, I have a sheet with some names translated to another language, I am trying to find the languages some names have not been translated too.
For example, if I have six languages, Arabic, Japanese, Russian, Chinese-Simplified, Chinese- Traditional, and Korean to compare too, I want to find any names that are not translated in certain languages.
Sample:
John Japanese
John Chinese - Simplified
John Korean
Martin Arabic
Martin Chinese - Simplified
Martin Russian
Ramon Arabic
Ramon Russian
Sam Arabic
Sam Chinese- Traditional
two formulas for one data set. The data is attached in the spreadsheet: "Product IDs". The data is a set of Master Product IDs (parent) and the Linked to them Products (children). I need to create a relationship between unique parents (Master Product IDs) and their children (Linked Products)
I need to create two formulas:
1. From the Data Set table, need to vlookup the unique value in column A (Master Product ID) and return comma delimited (concatenated) corresponding values from column B (Linked Products). So, the result will be as shown in Table 2.
2. From the Data Set table, need to vlookup the unique (de-duplicated) parent/children relationship in column A (Master Product ID) and return comma delimited (concatenated) corresponding values from column B (Linked Products). There are total 3 parent/children relationships in Table 1. So, the result will be as shown in Table 3.
i want to put a subject for a negative values, how should i do it?
For example:
lookup_value: -1000
table_array:
<0 - Poor
0-10000 - Good
> 10000 - excellent
is it possible to do this? ALternatively see the (new) attachment for clearer question.
I have about 20 files that all have separate passwords. When I enter the password for six of the files, I receive the "Unable to Read File" error message.
View 5 Replies View RelatedI am trying to do a vlookup function of 2 values but the key lookup column is an approximation.
I have attached a sample data file. Essentially, on Sheet 1 Column M (labeled as EPS), I want to do a vlookup of both Column A and B, and copy the values in Sheet 2 Column K into Column M. The approximate value comes from Column B, the date, as Sheet 1 has all the dates from 2001 and 2008 while Sheet 2 only has 4 dates per year. On sheet 2, the first 2 dates are 10/30/2001 and 2/5/2002. I want the EPS value for 10/30/2001 to stand for all values between 10/30/2001 and 2/5/2002.
The Vlookup function with a True value for the last criterion can do this for a vlookup of 1 variable, but it doesn't work for 2.
by using vlookup i can only get the first data for every time. how can i get this table?
View 14 Replies View Relatedlook at my Vlookup formula and tell me what I'm doing wrong? I have a drop down menu that contains a list that I want to look up its values (as shown on the 'A' columns), the look up values are in sheet 2.
View 3 Replies View RelatedI have a column in a sheet that has the same data more than once and I'm using a vlookup function to pull that information from the column. However, I don't want to repeat the same information more than once. Is there a way to show an item in vlookup only once.
Here's the scenario:
Column A
New York
New York
LA
Washington
New York
Washington
Washington
LA
New York
I want the outcome in my vlookup to be:
Column A
New York
LA
Washington
under column F, 01/05/1901, to display Jupiter in F6 and also populate Neptune in F9 and Saturn in F7, based on the date_aspect table.
I'll keep this short and just post the sheet.
I need a macro to calculate the order value i.e when i fill in a qty against any code a macro would execute and get the rate of that code from (rate file worksheet) and multiply that value with the fill in qty and display it and also, when i fill in a qty against another code the macro should perform the same procedure but in this case it would add the value to the last value and show the combined total value for the order,
View 9 Replies View Relatedthis is the code i have for lokking up two values(J2&K2) but i would like to add a third one L2
=VLOOKUP(J2,OFFSET(A$16,MATCH(K$2,A$17:A$782,0),1,COUNTIF(A$17:A$782,K$2),3),3,0)
I have a vlookup that searches through a named range to find a account number and returns the value of an account payment.
The lookup works fine until a two or more payments have been made to the same account. Then the lookup only return the first value in the range.
Is it possible for the lookup to SUM all the payments and return the total for that account number?
I am trying to simplify a complex array formula using a UDF. I am trying to return multiple corresponding values horizontally. Can this be translated to VBA?
=INDEX($B$2:$B$8, SMALL(IF($A$11=$A$2:$A$8, ROW($A$2:$A$8)-ROW($A$2)+1), COLUMN(A1)))
A11 is the lookup value
A2:A8 is the range where A11 is located
B2:B8 is the value I want to return
I'm trying to compare two quantities on two different sheets. I've used VLOOKUP in the past on other sheets. This time round I cannot understand how to us it on this query when the data is contained and mixed in one cell.
Here goes explaining..
Sheet1, shows we have stock of Mini Speakers in blue, the 'Main SKU', 'Size' and 'Current Stock'
'Current Stock' is the cell we are trying to compare
Sheet1.PNG
Sheet2 shows the 'SKU', 'Name' and 'Option1'. Option1 contains the values I'm trying to compare... sku":"X-MiniB-S","value":"S","quantity":"1"
Sheet2.jpg
Basically, I need to check that 'Current Stock' matches the value in 'Options1' and return a value if they do not match.
I have a calendar (tab March in the attached file) where I can indicate the delivery package of tab List. The problem that if the delivery happened twice a day, only the first one will be indicated. If there is any way to indicate both deliveries?
View 2 Replies View RelatedI am creating a payroll spreadsheet that will look up tax deductions from a spreadsheet I pulled from the IRS website. The first two columns represent a range of values the employee's pay would fall between. The first column is "paid at least" and the second column is "but paid less than".
Once I locate which row the employee's wages fall between, I would then need to match their number of withholdings with the corresponding column. Columns 3, 4 and 5 have headings to represent 0, 1 or 2 withholdings.
The value I need returned would be the intersection of wages paid and withholdings. For my spreadsheet example, if the employee's wages are 1,023 and they have 1 withholding, I need the formula to return 147. I was able to find a vlookup/match formula but it worked only without a range of wages paid.
For example, if the employee was paid exactly 1,030 and had 1 withholding, it would vlookup/match to return 147. Obviously, this won't work with me needing to find the correct row based on where their wage falls in the ranges.
I've attached a picture of the spreadsheet example below. payroll example.jpg
I am currently busy with a material tracking sheet. The sheet tracks all the material from fabrication to being released from painters.
My problem is that in a summary sheet that I created, I used vlookup to get the exact value of the item number that was released.
Focus on Item # 043-06016
example summary.jpg
[Code] .....
This formula only gets the first value and not the 2nd value that was also released so that in my summary sheet i can get 2
example released items.jpg
I want to match two different values in the same row and then have it return another value in that row.