I have a spreadsheet template whose Left and Center Print Headers are set to static values.
I would like to pass a single cell's data to the Right Print Header whenever I print the given spreadsheet.
I would also like the Right Print Header to refresh itself each time I print the sheet so that any possible change in the referenced cell will be accounted for.
I have a workbook containing amongst others a sheet each week of the year.
When I print one of these sheets I want to include the text value that is in B1 in the centre section of the header.
As there are a lot of other sheets in the workbook the code should check to make sure that there is a value in B1 and if not do nothing.
Is this possible?
I would like to have the tab names as part of my header for printed report. Can I automate that process?
View 2 Replies View RelatedI have a database that starts on row 10 with header information in row 9 explaining the purpose of the data for each column. In rows 1 through 8 I have general information that when I print the database - I would want on the first printed page (as well as the beginning rows of the database) and have the remaining print pages be the remaining portions of the database but have the header row (row 9) at the top of each - like a header row.
I know how to goto FILE > PAGE SETUP > SHEET > ROWS TO REPEAT AT TOP: - but this will put row 9 at the top of ALL pages...which I want, but not on the first page. I'm ok with making a print button with a macro...but no idea where to begin with the vba code to do this.
is it possible to choose $[file] in custom header area but only have the file name, before the xls extension print?
Also, is it possible to have the file name print in all caps? (or would the file have to be named in all caps?)
i am trying to come up with some code to print many sheets in a workbook based on user clicking a button on each sheet.
I would like the code to be reusable and based on the activesheet, this way I don't need to write code specific for each sheet.
My first thought was to use something like ActiveSheet.UsedRange, but the rows may span several pages, so I'll need the header row to repeat on each page
Here's a snippet I recorded
ActiveSheet.PageSetup.PrintArea = "$A$2:$E$12"
With ActiveSheet.PageSetup
.PrintTitleRows = "$2:$2"
But I can think of a way to use UsedRange but drop out about rows 1-4 which do not need to be printed on the reports
Number of Cols varys on every sheet as well and diff start/stop cols
Ex one sheet A:G, another sheet C:T
Cell 1A = Lot# Cell 1B = Last Name Cell 1C = First Name Cell 1D = Phone. I need Row1 to be repeated on each page. The list has about 200 names. We live in a senior community so the list changes quite often.
View 3 Replies View Relatedi have this printing format ...
View 14 Replies View RelatedI am trying to link what is in the header and footer with information contained in certain Cells. (I eventually want to have a user form to help input the information, but one thing at a time.)
How do I go about getting the following information into code so that I can update the enclosed code?
Left Header: Client Name contained in Sheet: "Table of Contents" B:1
I want to select a range in a spreadsheet and then set it as the print area. the last column I want to be selected is contains the text data "ABC" in row 1 and is the only column with data "ABC" in row 1. The last row I want to select contains the text data "DEF" in column 1 and is the only row in column 1 containing the data "DEF". Basically I want to select the range [A1:column("ABC")row("DEF")] and then set it as the print area.
View 2 Replies View RelatedIs there a way to link a header or a portion of a header to a specific cell?
View 14 Replies View RelatedI am working on a "3 worksheet" excel workbook. The first worksheet does not require any header.
I'd like to enter data into the second sheet (say cells A1 and B1), and use VBA to pull from those cells to generate the same custom header for both the second and third worksheets.
For example, I'd like the header to pull "# 123456" from cell A1, and "789" from B1 in sheet two, putting them in a centered header for both sheets two and three (same reference cells from sheet two for both, not new values of A1 and B1 from sheet 3 for sheet 3 header). I'd like to format in a way that looks something like this:
#123456
789
I'm currently running Excel 07, and was able to pull from a cell on one worksheet into that sheet's header but couldn't get it to span multiple sheets.
I have a booklet I want to print from Excel 2000. I'm not seeing how to have the HEADER on page one only. The header is coming up on all pages. Is there a way to tell Excel to print the Header on page one only?
View 2 Replies View RelatedI am trying to come up with a way to print out data that is variable in the amount of rows to print.
1. Cells C1 thru M6 is heading of report
2. Cells C7 thru M400 all have formulas and display information only when criteria in Column C in each row is met, if condition is not met it displays no informtion. (There lies my problem).
I need a way to print out only the area that information is displayed in and skip the areas that are not displayed. (Currently I have hard coded the print range using the largest report)
Within the Workbook events there is a "Before_Print", however I also need something like "After_Print" which does not exist (as far as I can tell).
I have several rows of data which alternate colors. When I print it I want to take out the fill (so as to save ink) - which I can do in the "Before_Print" event. [No problem.] However, once it is done printing I need to restore the alternating colors, but I cannot think of any event or trigger which would enable this.
I have thought through several things and the closest thing I can think of is setting up a timer. But there is of course no way to now how long to set it for. [Before/After Save also has the same "issue".]
I've found some code which works to print certain pages with value in cell A1 but I need to print dynamic ranges on some of the sheets as they will have filters on so the rows ranges will be different each time.
So far this is what I have but the dynamic range part is not working:
VB:
Sub Print_All_Worksheets_With_Value_In_A1()
Dim Sh As Worksheet
Dim Arr() As String
Dim N As Integer
[Code] ....
I have a tab with different city names and then a a series of answers to a number of different questions, what I need to do is create a macro which looks a table on a different tab, and if column b matches any of the words in the table to then print that entire row of answers.
So if the information found in R1!M3:M21 is found in Results!B:B then print that row to sheet R1. If the information found in R2!M3:M22 is found in Results!B:B then print to sheet R2 etc.
This is the only other way I could describe it, however I don't think it can be done as a formula anyway (even though it is somewhat gibberish)
IF(ISNUMBER(SEARCH(R1!M3:M21,Results!B:B))print the row,move onto next row)
got a great bit of code the other day from this forum to automatically print 'x' amount of copies based on the value in cell (see below)
View 2 Replies View RelatedIs it possible to create a command button to print the sheet, and, have a prompt come up and ask you to enter a date? Then that date is entered in a cell and the sheet prints? Just not sure where to start. I know how to make the command button and get to the view code for the button.
View 9 Replies View RelatedI need to use the "&" sign in a header and it does not recognize it. We've tried several things to no avail.
View 2 Replies View RelatedI have a calculator and I am trying to set a macro that will take the cells highlighted copy them to another sheet, change the format to standard( no background color) make the data fit in one page and print it.
this is what I got so far:
Sub Set_Print()
'
' Set_Print Macro
' set printing area and print
[Code]......
She has a spreadsheet created in Excel 2003 (she is still using 2003) which contains an image with a textbox in the top left corner then all other cells contain data.
When user prints this spreadsheet all that prints is the image and the textbox.
I have cleared the print area reset the print area removed the picture (prints only the text box)
and none of these changes have changed what prints.
I have checked all printer setting and these appear normal.
previously user could print this spreadsheet fine and all other worksheets in the workbook print fine as well.
other users are still able to print to the same printer correctly from this spreadsheet.
Using Excel 2003 I am trying to write a macro to set the print area according to the amount of data in a particular range of cells. I find I can include this instruction
View 2 Replies View RelatedI added an attachment with an example. You will see a matrix, with in the most left column an ID, then the headers of the matrix has different numbers that mean something.
What I want to do is, you fill in a number in the combobox, then press on a button and a report will be made on a new worksheet. With a list of the numbers and dates in the matrix that the ID has. Like shown in the example sheet in the workbook.
I have attached the excel sheet here for reference.
I would like to sum up the values across rows, so long as they have the terms "FQ1", "FQ2", "FQ3" or "FQ4" in the first row.
In other words, for the row "Total Revenue", I would like to sum up the quarterly values, using VBA, since the number of quarters increase with time.
How should I code up a VBA for that?
what is the code to sort a spreadsheet in VBA code by HEADER rows?
i have 2 rows i want to sort by: first by Column D row 1, then by column C row 1.
Cells.Select
Range("C1").Activate
Selection.Sort Key1:=Range("D2"), Order1:=xlAscending, Key2:=Range("C2") _
, Order2:=xlAscending, Header:=xlGuess, OrderCustom:=1, MatchCase:= _
False, Orientation:=xlTopToBottom, DataOption1:=xlSortNormal, DataOption2 _
:=xlSortNormal
Range("C2").Select
selects all cells, sorts, then de-selects.
I've been trying find an appropriate formula to extract the column header from a table in a different sheet if the row header and value in that table is known.
in the lookup table the row titles (column A) are product codes, column titles (row 2, D through AX) are business names and the table values are quantity.
In a different table I have product codes in column A and in column B i have the max number/quantity of products for that code. In column C i want to put the company name associated with the product and the number/quantity.
I need a bit of VBA code which will run automatically when a csv file is opened. The code needs to move anything after column F onto the next row and repeat until there is no more data. The data is generated by an external program but is put on the same row (not sure why it does this). I have included an example of the csv file (the data in it is garbage so ignore it) for you to look at. the header row which needs inserting needs to be:
A1=Status
B1=Job No.
C1=Date
D1=Name
E1=Room
F1=Description
Hope this is enough information for you. bear in mind the amount of data being generated could be quite large. it has to be run automatically in order to be used in seamless mail merge.
On sheet1 I got a lot of columns with data, starting from row 8, which is the header.
On sheet2 I'd like to retrieve the filtered data, based on the value mentioned in cell A1 (on sheet2)
So if for example cell A1 on sheet2 shows "Peter", the code should filter the data on sheet1 with "peter" in the header.
The filtering should be based on cell color (red in this case)
The filtered data should then be copied to sheet2 starting from A3
I have managed to open an HTML file from IE and start importing some data from the HTML source to an excel table.
The problem is that I need to get access to some information in a function that is in the HTML header and I do not know the syntax to use.
I am defining the HTML document using ".Document.body.innerHTML". But I need to find the syntax that is equivalent to ".Document.head.innerHTML".
With HTMLdoc
.Visible = True
.Navigate PageString
Do Until .ReadyState = 4: DoEvents: Loop
End With