how can I modify the formula below so that after every row (i+60) the letter D changes to E then F, then G..... and so on. I want the following with the formula below:
=MAX($D$2:$D$61)
=MAX($E$62:$E$121)
=MAX($F$122:$F$181)
and so on...
[Code] .....
I would like to search for a certain pattern that appears in a cell. For example, I have certain cells that begin with a 7 digit project code (Ex: "1234567 - Project Red"). I was planning to use an IF inside a FOR loop and then do an action when I find the cell with the pattern. I thought I remember it being something like Format(########*) so that I have the wildcard on the end since there is more than just the numbers. how to make other patterns work such as Number-Letter-Number or Capital-Lowercase-Capital
View 3 Replies View RelatedI have a column of cells, some blank, some containing just numbers, some containing just letters, some containing numbers preceded by the the letter 'p'
E.g.
frt
34.2
36
p34.5
In the cells containing the number preceded by the 'p' - i would like to remove the 'p' leaving just the number, with all other cells remaining unchanged.
I need a function or VB code to parse through a column of numbers and find a repeating pattern. The column has some initial numbers that do not fit the pattern and I need those returned along with the repeating pattern.
I am new in extracting data from excel .
There is a report that contains a various amount data, in one cell it describes the outcome in a summary format of how an issue was resolved.
Is it possible to search a cell of summary text that contains a set pattern with letters & numbers i.e."CL900962" then either place a "YES" or "NO" in another cell if found?
The pattern will always begin with letters "CL" followed by 6 digit number.
how to create some code that can convert any column number to it's respective letter, from 1 = "A" to 16384 = "XFD". The code is posted below. Enjoy, or let me know how you would improve it.
Code:
Function colNumToChar(colNum) As String
Dim Num1, Num2, Num3 As Integer
Dim Let1, Let2, Let3 As String
[Code]....
All my columns headings are now numbers instead of letters. how do i change them back to letters
View 5 Replies View RelatedI have a excell spreadsheet that consolidate information from several other excel spreadsheets generated daily. To make this consolidation I have to open each daily excell file and copy some columns(always same ones) to my consolidate spreadsheet, but each daily information goes into a different column in the consolidated file.
So, I need a way to convert the columns names into numbers to be able to use loops on the VBA code where I can specify in each column the paste has to be done.
Anyone has the VBA code that can make this column name conversion into numbers?
I want to be able to use column numbers instaed of letters when selecting a range in VBA. My current code is: Range("G12:Z500").Select. The columns, however are reliant upon a variable, therefore I would like to be able to use that variable to change the columns when selecting this range.
View 2 Replies View RelatedI am attempting to sort a column with mixed letters and numbers. However, I have been totally unable to get them to sort the way I want them.
What I have is:
K600
K2
K2A
K2B
K159
K159A
K159B
K1
K1A
K1B
K428
K8
K8A
K8B
etc, etc. The prefix letter is only a K - no other letters. However, the suffix letters can be anything from A to E (at the present time)
I need to sort them numberically from K1 in descending order ie:
K1
K1A
K1B
K2
K3
K4
K4A
K4B
etc etc etc
How do i turn column letters to numbers and vice versa
take y values from column and take x values from row
I have 'resolved' values in column A1:A10
I have 'received' values in row B11:K11
I need to fill out a table using the tables axis values stored in the column and row above.
I have a row of numbers that change as they go up. I will have 2 rows of numbers that will range from 1's all the way to 9's (B through BO) I will have different letter sequences that I will be entering as the criteria in column F either on the Up and Down sheet or the Even and Odd sheet. When I say different sequences. This is 1 group of letters. The next group of letters in column F will be in a different order. They will always be a U and D in one and E and O in the other but in row 13 it may have a U or D and it will be the same all the way down. The object is for me to be able to place the letters in either column F from rows 13 to 60, place 2 rows of numbers in rows 58 and 59, press the advance cell in G1 and it it populates all across the spreadsheet from I to BO. I will get all different number sequences since I am starting with a different number in rows 58 and 59. I have all the letters color coded and they move up based upon the color of the letters in row 1. If there is a green E in column M then I will be the column that the number advances from 1111 to 2111. If there is a green O then column K will advance up from 1111 to 1121.
I made a short video if you wish to view it.
The conditional formatting is very important so I need to have the green font with gray shade and red font with yellow shade [URL]....
i have a list of 2000 fields which have the same format IE "AB10014"
I need to remove the "AB" from every field and leave the #.
Besides putting a space and running text to columns I'm not sure how.
I am trying to come up with a formula that will distribute the numbers as shown in this diagram:
To get the value of each number divide 42,000 by the last number in the pattern. For example the fifth column from the left would be 42,000/18. That means that each number would have a value of 2,333.33. By the time you reach the half way mark, nine in that example, you should have around 21,000, and the other 21,000 should be distributed between the last half (block 10 thru 18). The formulas would have to work on all of the patterns. Can anyone think of a way to match the pattern shown? It doesn't have to be exactly the same pattern just as long as the number of blocks remains the same for each half, and they total 21,000 for each half without going over 42,000 all together. There has to be 11 rows from top to bottom.
There is a list of interconnections of panels.
For example:
From To
..................
P1.........P4
P2.........P4
P1.........P5
P1.........P4
P3.........P5
P2.........P4
P2.........P4
P2.........P3
There are hundreds of sheets like this with more complex panel numbers (there are 70 to 80 panels). I want to count the number of times each panel is linked with another panel i.e the number of times its name is mentioned in front of it.
This may look like as follows.
............P3.........P4.........P5
P1..........0..........2...........1
P2.........1...........3...........0
P3..........0...........0...........1
Using the following data
R10-12128
R11-12x12x8
R11-12x12x8
R1-12x12x8
R1-12x12x8
R12-12x12x8
R14-12x12x8
R16-12x12x8
R18-12x12x8
R2-12x12x8
I want it to sort like this:
R1-12x12x8
R1-12x12x8
R2-12x12x8
R10-12128
R11-12x12x8
R11-12x12x8
R12-12x12x8
R14-12x12x8
R16-12x12x8
R18-12x12x8
What is the formula to achieve this?
Pre-requisite: I would consider myself to be very poor with excel, based on what I've read on this forum and found on my web-searches. I have a worksheet that has a list of data on the left going vertically, then a summary of this data going horizontally across the top. It is not arranged in such a way that transposing the data will do what I want. I am pulling the 5th word out of the title of each block of the vertical data and need to show this word on the horizontal section.
When I use this formula to pull the 5th word: =MID(MID(MID(SUBSTITUTE(A2," ","^",4),1,256), FIND("^",SUBSTITUTE(A2," ","^",4)),256),2,FIND(" ",MID(MID(SUBSTITUTE(A2," ","^",4),1,256),FIND("^",SUBSTITUTE(A2," ","^",4)),256))-2)
I need to increase A2 to A30, then A58 (up by 28 every time) in every instance in that formula. The fill handle increases the values by 1, instead of 28 (even if I do 3 or 4 instances manually) How do I do this? I've run into this problem in other scenarios, and there HAS to be a way to get around it.
Is there a VBA command to get the letters, instead of the numbers, of the column of a selected cell?
I have to letter a list whihc means setting up a loop using character codes.
I may have to go into double letters so I am working on how I would set up the loop for if and when it gets past 90 and starts on double letters. so far the highest is the letter "U"
of course the easiest would be to pick up a column value as a letter
NT values do not get a number
A_____ _____NT###
B_____1_______C####
C_____2_______RMK###
D____ _______NT####
i am guessing the loop might involve some arithmetic test between the count and the character set 65-90. or maybe a mod thing.
I have a spreadsheet wtih a number of rows that contain answers to different criertia in each column.
The row may therefore have cells that either have numbers or letters.
Column A will be the title of the row.
I want to write a function to find the average value of the numbers in any row with title 'x'.
So it would look down column A, and look for those called 'x', and then average all the numbers across all those rows.
I have tried to use =averageif, but I think the fact there are letters in the cells being assessed (which I just want to be ignored) creates an error.
I am trying to make printable book labels in one worksheet based off of values from another. The labels that I have are standard address sized and come in sheets with 3 columns and 10 rows. My "label" worksheet has 5 columns (with B:B and D:D as "spacers") I made a "calculation" worksheet that simply runs the equation I want to use for the labels from A1:A1000. On the "label" worksheet, I have this formula in cell A1:
=IF('Label Calculations'!$A1="","",'Label Calculations'!$A1)
This way, it won't return 0s for blank cells from the "calculations" worksheet. I dragged down the formula to cell A10, but would like to continue the pattern so that cell C1 would be:
=IF('Label Calculations'!$A11="","",'Label Calculations'!$A11)
and cell E1 would be:
=IF('Label Calculations'!$A21="","",'Label Calculations'!$A21)
and the pattern would continue with cell A11 with the formula:
=IF('Label Calculations'!$A31="","",'Label Calculations'!$A31)
Then cell B11 would be 41, C11 would be 51, A21 would be 61, etc.
I can do it manually by adding the function in the top row of each "page" (A1,C1,E1 then A11,C11,E11...) and dragging them down each "page." However, I may end up with 20 some pages of labels. I feel like there should be an easier way I can do this.
CartonNo1
ProductNo1
LotNo1
LotNo2
CartonNo2
ProductNo1
LotNo3
LotNo4
In the above (repeating for say, 50 or more cartons), is there a way with a macro(I know nothing about) or pivot table(see macro) to get the following format/result?
CartonNo1
ProductNo1
LotNo1
CartonNo1
ProductNo1
LotNo2
[code].....
Tallying entires from a PDF into excel. Such that
c=1000
d=15000
e=50000
f=100000
g=250000
h=500000
i=1000000
j=5000000
k=2500000
l=50000000
In a cell I would like to type =c+d+c for example and have it say 17,000 rather then me having to type in =1000+15000+1000.
I created this data worksheet with many tabs and multiple users. On the main tab, something weird has happened and I have no clue how it happened or how to fix it....
View 5 Replies View RelatedThis formula will add up the letters D,N,H with one value
Like =SUM(COUNTIF(B4:AZ4,{"D","N","H"}))*12 will =36
How can I add bN =17 bmN =19 bD=24
=SUM(COUNTIF(B4:AZ4,{"bN","bmN","bD"})) to add up to 60
I'm working on a function that will sum a row of cells containing letters and numbers. I am currently using :
=SUMPRODUCT((0&SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(B5:S5,"T",""),"TP",""),"TPE",""),"P",""))+0) as my base.
Right now the formula will work with T, TP, and P; however as soon as I type TPE I get #value.
Either way you get the point of what I am trying to do, however my cells can contain any one of the following combinations:
T,TP,TPE
P,PE,
E
In column A I have the following numbers
13710
14782H
9827
14782
14206B
a formula that looks at this range of cells and returns only the cells that have a letter at the end. The letter range goes A to M
I am a school teacher trying to adjust my tracking sheet to calculate pupils levels. I am looking for 2 potential formulas that will do the following.
1 - In cell AE I would like to generate a formula that will take the data entered in cells J:5, L:5, N:5, P:5, R:5, T:5, V:5, X:5, Z:5, AB:5 and AD:5 and give an average level.
2 - In cell AH is it possible to generate a formula that will calculate how many levels of progress the pupils are making - In other words I need Cell I to be calculated against cell J to see how much progress the pupils are making - for example if in cell I:5, a pupil is was given a 3a, and then in cell J:5 is given a 4b, they will have made 2 sub levels of progress. As well as this, can that progress then be averaged out across cells I:5, K:5, L:5, M:5, O:5, Q:5, S:5, U:5, W:5, Y:5, AA:5 and AC:5 to give an overall number of of levels of progress? An then..... can I colour co-ordinate the cell so that if the pupils are making 3 or more sub levels of progress it turns green, 2 sub levels orange and 1 sub level red?
Levels work like this
3c
3b
3a
4c
4b
4a
5c
5b
5a and so on
i want to convert numbers to letters in the excel Sheet
I.E: when the number is 1000.00$ it write in another cell
on thousand dollar only
1500.00$ one thousand five hundred dollar only
I have a word, for example ROCK. I asigned numbers to the word. R=1,O=2,C=3,K=4. My Question: If I type in ROC it must return 123. If I type in KR it must return 41, etc. Is there a basic formula I can use to solve this?
View 4 Replies View RelatedHow do I do data validation/cell formatting so that only alphabetic characters can be entered and no numbers?
(We use the cell for First Name, Last Name, etc. and I don't want potential entries like Mr. 56565 55454 because the cells are formatted as text and allow alphabet and numbers.)
I tried =NOT(ISNUMBER(H6)) for Data Validation, but that didn't work.
??
VR/Lost