Resize Cells To The Largest Word In Cell In VBA
Jul 16, 2014In the attached workbook the classify macro reformats data. Can a line of code resize the cells to the largest word in the cell?
Example.xlsm‎
In the attached workbook the classify macro reformats data. Can a line of code resize the cells to the largest word in the cell?
Example.xlsm‎
insert a word object, type... and resize...
Dim objX As OLEObject
Set objX = ActiveSheet.OLEObjects.Add(ClassType:="Word.Document.8", Link:=False, DisplayAsIcon:=False)
objX.Border.Color = RGB(255, 255, 255)
objX.Height = 200
objX.Width = 600
objX.Top = 300
objX.Left = 100
'-------make active
objX.Activate
Set objX = Nothing
i would like to place the object in a worksheet and have all the rows of data move down below the word object (i.e., below the word object--i do this resizing manually now...)...?
I have a table showing interest levels in training courses from a group of schools, eg:
English Maths Science
School1 3 4 2
School2 7 1 0
School3 3 2 5
I want to identify the column heading for the first, second and third most popular courses. ie for School1 the most popular course is Maths, second most popular is English and so on.
I have tried using the OFFSET function, which worked if I provided the cell location of the required value. I then looked at the ADDRESS function to provide the cell location: eg For School2 find the 2nd most popular course:
=ADDRESS(ROW(A3),COLUMN(data?)+MATCH(LARGE(B3:B5,2),B3:B5,0)-1)
But I have got stuck with what I should enter for COLUMN(data?) as I do not know in which column the second largest value is.
I am sure Excel has the required functionality.
I have a range of cells that contain numbers. In column a, row 3 is where the numbers start and they populate over to column f. I normally have 7 or 8 rows of numbers but this can change. The last row in the first cell has the word 'analysis' I need to copy each row, columns a to f, until I hit the word 'analysis' in the cell which will be in column a. I then need to paste these cells data into another sheet.
View 9 Replies View RelatedIn my column B, I have different words like Balance, Notes, Expense, etc. Is there anyway I can look into column B, and if I get the word Expense, then take the number directly to the right of it (from column C) and SUM it? Not sure if it matters, but let's say I want to put it in cell C2. I figure this will allow me to do this like insert, delete rows in the future, but my equation in cell C2 will still add up what I need.
View 2 Replies View RelatedI'm looking for a formula to enter within a particular cell which will return the largest number that appears within a range of cells, for example the range H:133 through L:136. If it's any easier, only one number will appear within the range, though it could appear in any cell within that range.
View 3 Replies View Relatedhow can I resize a from my active cell to a specific cell (eg. L1) and select all the cells in between? I am using this code to select the last cell after my data (active cell is in column A).
View 2 Replies View RelatedIs there a way to automate the resizing of a row to accomodate the text that is pulled into a cell as the result of a formula?
I have a merged cell which receives the result of a DGET formula. The result can be as few as 6 lines of text or as many as 24 lines.
I suspect I need to count the number of lines in the result and resize based on that count multiplied by 15 points.
I don't know how to write the VBA but it would be kind of Resize Row.Countlines x 15 pts. and be executed by the event of calculating the formula from its default setting.
Practically speaking, the default setting is sized per the result of the desired code: there is a blank formatted merged cell that can be manually overwritten that is sized by the typical number of bullet points.
I basically I have a column with numbers. All the numbers are positive integers. What I like to do is have a VBA function that extracts the integers with the largest number of digits. So for example if we have the following column:
12
123
234
12346
2345
[code].....
So basically we search for largest number of digits, and extract the numbers that fit this category, which could be just one number or multiple numbers.
I want to resize a shape and set the height to a specific cell. How can I achieve that?
View 7 Replies View RelatedIs it possible to export Excel cell contents to Word fields in a protected Word document? For example...
What code would be needed to tell Excel to open up, copy and export the contents of A2 in the active sheet of a workbook to "Field 2" in a Word document named "Report 01" and then put the contents of B2 to "Field 2" etc?
Do both applications have to be opened up at the same time or is Excel able to open up Word on its own? Will the macro be able to....
1. Automatically open up the correct Word document?
2. Look ONLY in a certain folder for the "Report 01" Word document?
or
Bring up a "selection" box that allows you to select the document you wish Excel to export it's data to?
3. Close and save the Word Document without any user intervention?
I need to count how many times the word Test is in the range B4:H9 with
Range N2 = Test the formula below works if Test is only in the cell once.
=COUNTIF($B$4:$H$9,"*" & N2 & "*")
But I have data in cells like below, this is all in one cell, so how would I have it count all the times test is in the range when some cells have test 2 or more times in a single cell?
5
Test
8am-2pm
Test
5pm-10pm
I now have this code that inserts a picture and then resizes it the active cell shape.
Sub InsertPicture()
Dim myPicture As String
myPicture = Application.GetOpenFilename _
("Pictures (*.gif; *.jpg; *.bmp; *.tif),*.gif; *.jpg; *.bmp; *.tif", , "Select Picture to Import")
If myPicture "" Then
ActiveSheet.Pictures.Insert (myPicture)
ActiveSheet.Shapes(ActiveSheet.Shapes.Count).Select
With Selection
.ShapeRange.LockAspectRatio = msoFalse
.ShapeRange.Height = ActiveCell.RowHeight
.ShapeRange.Width = ActiveCell.Width
.Placement = xlMoveAndSize
End With
End If
End Sub
I did a search & couldn't find anything related to my question: If I have a range of known cells (A1, A3, A5, for ex.) & want to find which cell has the largest value & then return the cell of that contains the largest value (not the value itself), how do I code it it VBA?
View 4 Replies View RelatedI have a bunch of cells in column b that have products.
Column B
Dell 24" lcd
vaio sony laptop
8.0 mpxl kodak camera
photoepsonprinter
Basically in Column A I want a formula that'll say.
If the word "dell" is somewhere in cell b1, then put the word "Dell" in cell a1.
If the word "sony" is somewhere in cell b1, then put the word "sony" in cell a1.
And then so on and so forth down through column A. The brand names are potentially endless, so is there a easy way to on like a seperate sheet make a list of brand names and have it pull from there?
Originally I made a if function that said if the brand name was contained in the cell then output the brand name, but that caps at 7 for the amount of brands i can use....
I want to find the largest cell in a column so I can use “auto fit selection” without cutting off type.
View 9 Replies View RelatedHow would I return a cell reference (address) to a cell that contains the largest number in a list?
I tried using "Address(large....) where I get the correct column, but the returned row # is the actual value in the cell (the highest # in the list).
I eventually will want to delete the highest number to leave the cell blank.
I need a macro to identify the largest value across columns I2 - AS2. Once found, I need to replace the value with value found minus the value in BQ. The final step would be to highlight the cell that was changed across columns I2 - AS2, then move to the next row and do same until I reach the last row in the worksheet. The number of rows vary each day but the columns do not.
I have written the attached code, which identifies the largest value in the first row, but I don't know how to replace the value found with the new value and then move to the next row until it reaches the final row for the day.
In the attached file, my largest value sits in AC2. That value needs to be replaced with 486.17 (1,175.37 - the value in BQ2 of 689.20). The cell should then be highlighted so I can quickly identified what cells have been changed.
I have an excel program that is supposed to count word instances in a word document. I can't seem to find the right declaration for a word document.
For example to declare a workbook in excel its
Dim wb As Work Book
I've tried
Dim doc As Word.Document
'or
Dim doc As Word.Application
as shown in some of the forum posts, but an error user-type not defined keeps displaying.
I would like to be able to find the largest visible area of continuous rows in a filtered table. I know one possible way would be to loop through visible cells using the "xlCellTypeVisible" property and count cells in each visible area. However, the data is consisted of tens and sometimes hundreds of thousands of rows so I was wondering if there is a faster, more efficient way to do this.
View 3 Replies View RelatedI am setting up a charity accounts sheet, that will also calculate money raised from Raffles, so each raffle will have a name, I can do this by matching the amount with a description but wondered if I could calculate it by looking for specific words or reference in a cell
Sum all cells that the adjacent cell contains the reference "Raffle 0001" but not "Raffle 0002" this needs to be calculated on another cell
Sum all cells that the adjacent cell contains the reference "Rescue" this cell could contain other text as well, so could say "Rescue for Sweetie by Laura Herarty" or "Rescue for Bliss by Jane Telford" all need to be calculated.
I'm trying to write a word or more but i want it to be in different cell.
Like: this sentence "Excel Program" write it in cell a1 but it slip to the cell a2. (so in cell a1 adn a2 this sentence).
I have hundreds of lines with unique tasks in each cell. I wanted to add 'P&C- ' to the front of each task and do not want to go through and add individually as it will take take.
Is there anything that can place in one cell and just drag to the last cell and complete?
E.g.
Current Cell: Task A
What I need: P&C- Task A
I cannot add attachments as my work seems to have a restriction on doing it and always asks for admin password
In cell A1 I would like to have a formula that indicates the number of times the word "Yellow Pages" appears in cells C10:C1000. The C column inidicates a referral source. So some of the cells will have "Yellow Pages" and some wont. In cell A1 I would like to have it tell me the total # of referrals from the lead source "Yellow Pages".
View 12 Replies View RelatedIs possible to make a script that search for a ”Word” in cells with more than one word?
View 9 Replies View RelatedI would like to automate this process that I'm doing currently through the "Text to Columns" function.
Basically I have various cells that contain many worlds such as:
FRESH LUNETTE SOLEIL REES 1'S
INFOKUS SOLEIL LECTURE LUNETTES 1'S
KENSIE LUNETTE SOLEIL ELEORA 1'S
KENSIE LUNETTE SOLEIL ELIZABETH 1'S
KENSIE LUNETTE SOLEIL JAMES 1'S
KENSIE LUNETTE SOLEIL VESPER 1'S
KIDS LUNETTE SOLEIL HOUSTEN 1'S
KIDS LUNETTE SOLEIL MINNIE 1'S
My goal is to separate the first world from the rest of the words in one cell.
Since all of the words are seperated by space, I use the the "Text to Columns" function and separate the words, so that I can get the first word into one column. The rest of the words have to be merged again through "Concatenate".
What I'm looking for is a VBA code or Excel function that can identify the first world (which vary in character lengths) and put it into one column.
I am trying to find a formula that will give me a word count in specific cells.
View 14 Replies View RelatedI would like to do a text split for the name only in cells where contains the word "Name". For example: Name A&A Enterprize
Text split function for it is =MID(A1,FIND(" ",A1)+1,255)
so it only recognizes A&A Enterprize.
How would I add an IF, Then function (If the any cell contains the word Name, apply the text split function, for cells don't have the word Name, just leave it blank) if i have to do this for a large data file so i dont have to copy this function for every cell that contains the word Name.
This does not seem to be working and I do not know why.
If Range("T3:T999").Value = "Duplicate" Then
MsgBox "It did work"
Else
MsgBox "What happened??"
End If
How can I delete all rows that have a cell that starts with the letters APP
View 3 Replies View Related