how can I resize a from my active cell to a specific cell (eg. L1) and select all the cells in between? I am using this code to select the last cell after my data (active cell is in column A).
View 2 RepliesI now have this code that inserts a picture and then resizes it the active cell shape.
Sub InsertPicture()
Dim myPicture As String
myPicture = Application.GetOpenFilename _
("Pictures (*.gif; *.jpg; *.bmp; *.tif),*.gif; *.jpg; *.bmp; *.tif", , "Select Picture to Import")
If myPicture "" Then
ActiveSheet.Pictures.Insert (myPicture)
ActiveSheet.Shapes(ActiveSheet.Shapes.Count).Select
With Selection
.ShapeRange.LockAspectRatio = msoFalse
.ShapeRange.Height = ActiveCell.RowHeight
.ShapeRange.Width = ActiveCell.Width
.Placement = xlMoveAndSize
End With
End If
End Sub
I was just wondering if it possible to create a macro that permanently increases the height of a workbook by a set increment
I have several workbooks that i have the code below assigned to
[Code] ......
So when they open they resize to that set size and position. and what ive been doing if i need to resize (which is often) is just adjust the values in the above code.
Not that the way ive been doing it is difficult but i was thinking how great it would be if i could have a macro i could run that permanently adds 9 to the .Height and subtracts 9 from the .Top
I have got stuck on one piece of my code and having trouble fixing... Overall I am trying to find variable station name in cell L2 of Sheet 2 in Sheet 1 and then select and copy the data from the data in "cell L2 of Sheet 2" to the last entry of that row. I have attached an example test spreadsheet of the data and a macro is within Sheet 1 called test1. Please note that cell L2 in Sheet 2 will always be different station name and the station list in Sheet 1 will change with differing station name.
The code I am using is:
[Code] .....
The code that is not working and bringing up an error is:
[Code] .....
Attached File : Copy of Testexample.xlsm
I have the following
Cells(c,r) = Range("fa:" & "fa.Offset(0,5)").value
Fa is a code that searches, once it's found something, it then puts that one cell.value into Cells(c,r). it then moves on until the next cell found with the required contence. I need it to put that one cell, and the next 4 columns along side it starting in Cells(r.c)
The problem is, I keep getting a global error. I am sure I have done something like this before, but cannot find it, or remember how i did it.
Range.Resize to an entire row? I have a range variable:
View 2 Replies View RelatedI am trying to print a range that falls just outside of a normal A4 size. Is there a way of scaling this range to fit the page. Withough changing the column sizes before printing(each column is diffrent size). Or will i need to load the column sizes into a array and resize for the print then back to original size from array.
View 2 Replies View RelatedMacro to CHANGE number of rows “3” to a variable range
(end.xlDown) on the macro below.
Sub GotToRangeResizeCopyPaste()
Application.Goto Reference:="MyRange"
ActiveCell.Resize(3, 10).Select
Selection.Copy
Range("OtherRange").Select
ActiveSheet.Paste
End Sub
Before I will hand in my proposal I have to check if my ideas are achieveable in excel. To keep it simple, the idea is to use different moving averages and the Min/Max(t-1, t-n).
For example, a buy signal is given when a fast MA crosses the slow MA from below. Or a buy-signal is given when the price on t is greater than MAX(t-1:t-n). Due to the scientific aspect I have to analyse a lot of variations of these moving averages and breakouts.
My question: How can I change the range of a formula with an other cell.
For example: Range: B1=20
MAX(A1:A20)
MAX(A2:A21)
How can I program it such that when I change the value in A1, the range of the formula will change with that value?
I'm looking for a piece of code, which would activate a certain Range i.e. the start of which would be in column A and the End in Column G. My problem is that the activated range of cells shuld be exactly in the same row as the currently active cell i.e. active cell B3 -> activated range A3:G3 .
View 6 Replies View RelatedI Have searched existing threads but cannot find the answer to my query,
As part of a longer macro, I want to sum all cells in a column which contains data. Each day the number of cells that contain data will vary.
I have tired specifying all the cells in the column which contain data as a range, by selecting the top cell and using the
Range(Selection, Selection, Selection.End(x1Down))
But I cannot get a SUM Formula of this range. If someone could show me the correct syntax to get a sum from a range like this I would be very grateful.
If I omit the column arguement in resize I get error.
Dim ii As Range
EndRow = MyPL.Range("c" & Rows.Count).End(xlUp).Row
Set ii = Range("Data")
q = (EndRow - ii.Rows.Count)
Names("Data").RefersTo = "=" & ii.Resize(ii.rows.count+q, ).address
End Sub
There are 4 lists containing accounting data and within each list the data rows beneath the headers are named ranges.
The parent input list is on the Payments worksheet with headings in A3:R3 and the data rows underneath are a named range entitled Payments.
The child lists contain formulas to pull the required information from the parent Payments list. These lists are identically sized and headed with headers in A1:K1. The data rows underneath the headings are named ranges entited Debits, Credits and VAT. The worksheets on which each resides have the same names.
I am looking for a way to automatically contract / expand the child lists as each row is added / deleted from the parent Payments list, ie so each list always contains the same number of rows.
The formulas already within the child lists will then ensure that the apprpriate data is copies to them from the parent Payments list.
the named range Payments will always contain at least a single row to ensure the retention of the required formulas and validation.
Note also please that there is a macro which automatically resizes the range Payments to a single row when a command button is pressed.
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code:
For Each c In Range("Q2:AC2").Cells
If c = period Then
c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.
How can I define a range, only for the active cell?
View 6 Replies View RelatedI have this code I wrote (combining variations of existing ones).. but not very well. unfortunately doesnt seem to work. It copies the information back onto itself
View 5 Replies View RelatedI would like to start off in col A, do an offset until a certain value is reached:
View 2 Replies View RelatedI am after a vba code that will sum the range from the activecell upwards.
The range does not go to the top of the column there are many blanks cells therefore it would need to
Range(Selection, Selection.End(xlUp)).Select
This is what I was working on and isn't very good and the sum formula does not work even though I have change the formula many times.
Code:
Sub Macro1()
Dim cellC As Range, rng As Range, topcell As Range, bottomcell As Range
Set bottomcell = ActiveCell.Offset(-1, 0)
Dim s1 As String
[Code] ..
When i click commandbutton1:
Copy Active cell (columnB), next cell (ColumnC), next cell (ColumnI), next cell (ColumnO) all of which exist in the same row.
I will then paste the values into another sheet in the next available row which i think i have mastered. the cells will be pasted next to each other i.e. instead of column B,C,I,O they will be pasted as column A,B,C,D.
My dilema is i am not sure if you can use multiple cell offsets to perform this or if it is better to use a loop.
I have some working code that makes a number of changes to an excel report using VBA. Each time I execute the code I am taken to a different point in the excel report (depending on user inputs). What I now need to do is to change the cell selection from a single cell to three cells.
For example, my code may result in cell B100 being the active cell. What I now want to do is change the selection from B100 to the range B100:B103. I would have thought I could write something simple like:
Sheets("Group").Range("ActiveCell:Offset(0, 2)").Select
I have tried every variation of the above but I can't seem to make it run. Where am I going wrong?
So the constraints are
1. if there's a value in name or names count => must be at least one value in test1 or test2
2. last value in names count must be equal to the sum of trues in B1:B4 Problem Is it possible to identify once any of the cells in A9:D12 are activated that once that range is deactivated I run the check to make sure the constraints are met, and populate default values in the case they are not?
Is it possible to identify once any of the cells in A9:D12 are activated that once that range is deactivated I run the check to make sure the constraints are met, and populate default values in the case they are not?
Trying to figure it out with a some combination of: checking if the last cell I was in was in the range and I am no longer in that range; using the selection change change event?
[Code]....
Attached File : HelpMeWorkbook.xlsx
I want my code to evaluate each cell in column B, and based on its value, copy the row from D to X and paste on the newly activated worksheet. I'm trying to use Offset, but it's not working.
View 6 Replies View RelatedSplit from: Clear Range To Right Of Active Cell Down. I was working through this the first step was to clear the contents of the cells. After they are cleared, I have another sub that then goes and retreives a unquie number and places it back at the top of the column that I just cleared. Would this same code that cleared the cells contents work to copy the contents of the active cell down that same column, until the cell to its right is blank? -R-
View 5 Replies View RelatedI am working on a macros that creates a new row for every data entry. Below is the macros that I have. In the new row, I want for the cells in columns F through O to merge right after creating the row. How do I go about this?
If Sigma = 0 Then
Selection.EntireRow.Insert ' New row for new entries
ActiveCell.Value = "NONE"
ActiveCell.Offset(1, 0).Select
End If
Im writing a macro and have a cell activated (using ActiveCell). If I want to select this cell (the activated one - i.e., k3) along with the 2 cells next to it (i.e., l3, and m3), how would i go about doing that?
I'm wanting to shift 3 cells downward and I know how to shift them down, but dont know how to select the cells i want.
I'd like to ranage the range selection from D1 to A1:B53, but a number of attempts have failed. but can't get it working.
Code:
FileName = "R" + Scheme + Product + "_" + Format((Date + 1), "DDMMYY") + ".RP3.txt"
Sheets("RP3").Select
Range("D1").Select
WholeText = ActiveCell.Value
Call OutPutFile(WholeText, FileName)
I'm trying to select a range of cells whereby the range is dependent on the currently active cell. I know you can use the "Activesheet.Range("A1:D2").select" method to select a range where the cells are always the same, but I'm after a dynamic selection where the values can be programmatically altered depending on some other result.
For example, let's say that I make a certain cell active (based on the result of some other formula), and I want to select the range of cells in the adjacent column that is X rows deep. Putting this into context, imagine the resultant active cell is B2, I then want to select the range C2:C10, but if the active cell is E10, the range selected would be F10:F18 (if active cell is X, then range would be Y:Z).
The Offset function would allow me to position the cell based on the current active one, but it doesn't let me select a range. The Range function only lets you choose either hard coded or index cells, e.g. "Range(cells(y,z), cells(y,z)).select", but this is still no good because I'd need to know the index value of the active cell (can this be done?).
can someone make a code for a range.Name = "match" as soon as active then that active cell is to be copied to cell C2.
View 9 Replies View RelatedI RECORDED THIS MACRO BUT I WILL LIKE TO MAKE TO AUTO SELECT THE ACTIVE CELL RANGE IS VARIABLE ON MY REPORTS MY CODE
Sub FORMAT_AS_A_TABLE()
ActiveSheet.ListObjects.Add(xlSrcRange, Range("$A$1:$L$1900"), , xlYes).Name = _
"Table1"
Range("Table1[#All]").Select
ActiveSheet.ListObjects("Table1").TableStyle = "TableStyleDark5"
End Sub
How can I convert all cell values in active range to text format without losing the actual value.
For Ex.
0123 will remain 0123
07/12/2014 will remain 07/1/2014
3453 will remain 3453
regardless of there previous format. Currently I am doing this manually for every column before creating a load file for SQL database.