Automatically Resize Row With Merged Cell?
Dec 21, 2011
Is there a way to automate the resizing of a row to accomodate the text that is pulled into a cell as the result of a formula?
I have a merged cell which receives the result of a DGET formula. The result can be as few as 6 lines of text or as many as 24 lines.
I suspect I need to count the number of lines in the result and resize based on that count multiplied by 15 points.
I don't know how to write the VBA but it would be kind of Resize Row.Countlines x 15 pts. and be executed by the event of calculating the formula from its default setting.
Practically speaking, the default setting is sized per the result of the desired code: there is a blank formatted merged cell that can be manually overwritten that is sized by the typical number of bullet points.
View 3 Replies
ADVERTISEMENT
Mar 28, 2007
I have a listbox filled automatically from some cells. I have to choose an item from this listbox, click a button, and then my macro will summarize some data. All it´s running, but a little problem, the size of the listbox is changing itself after some actions. For example, when i change the value of the cells from where i fill this listbox.
View 2 Replies
View Related
Jan 6, 2009
I have a 40+ page workbook that I'm working and I need to print every sheet in the workbook on legal size paper, and each sheet can not be > one legal piece of paper
The macro will cycle thru all the sheets in the workbook, yet it will only adjust the current active sheet. I highlighted where I think my error is in red....
View 9 Replies
View Related
Oct 31, 2011
I have a scorecard that automatically adds a merged row across each column when it is exported to excel. Is there an easy way to copy the entire column over to the next sheet without manually changing the formula in increments of 2?
View 1 Replies
View Related
Dec 17, 2009
I have a macro to copy a merged cell from one sheet and paste it to another as a merged cell. Basically, I want to copy it AS IT IS and paste it AS IT IS. My code is below.
View 4 Replies
View Related
Sep 27, 2009
how can I resize a from my active cell to a specific cell (eg. L1) and select all the cells in between? I am using this code to select the last cell after my data (active cell is in column A).
View 2 Replies
View Related
Oct 13, 2013
I want to resize a shape and set the height to a specific cell. How can I achieve that?
View 7 Replies
View Related
Jul 16, 2014
In the attached workbook the classify macro reformats data. Can a line of code resize the cells to the largest word in the cell?
Example.xlsm‎
View 6 Replies
View Related
Jun 23, 2003
I now have this code that inserts a picture and then resizes it the active cell shape.
Sub InsertPicture()
Dim myPicture As String
myPicture = Application.GetOpenFilename _
("Pictures (*.gif; *.jpg; *.bmp; *.tif),*.gif; *.jpg; *.bmp; *.tif", , "Select Picture to Import")
If myPicture "" Then
ActiveSheet.Pictures.Insert (myPicture)
ActiveSheet.Shapes(ActiveSheet.Shapes.Count).Select
With Selection
.ShapeRange.LockAspectRatio = msoFalse
.ShapeRange.Height = ActiveCell.RowHeight
.ShapeRange.Width = ActiveCell.Width
.Placement = xlMoveAndSize
End With
End If
End Sub
View 9 Replies
View Related
Mar 21, 2014
Im trying to use a merge cell value on the Active sheet as the sheets Name, my code is throwing an error when it gets to the naming the sheet.
VB:
Sub CreateSheets()
Application.ScreenUpdating = False
Dim numtimes, x As Integer, ActNm As String
[Code].....
View 4 Replies
View Related
Dec 2, 2013
I Want users to be able to copy a reference number from a an external program into excel, this works well for single cells but the cell I want them to be able to paste the information into is a merged cell and keep getting the "Data on the clipboard is not the same size and shape blah blah error". What I can do to get this information to paste? Is there some VBA that can kinda trick the cell to believe its single or when pasting it unmerges and then remerges again?
View 1 Replies
View Related
Jan 18, 2014
Excel 2010. I need to place picture into one cell or one big merged cell, as a background fill. picture must resize to size of cell. must be fixed in, not in front. i still need write into that cell, so it needs to be really background.
View 2 Replies
View Related
May 10, 2009
The issue that I am having is with merged cell data. What I am trying to do is check the value of the merged cell against a selection from an array and place the value into a cell.
What apparently occurs is that if the row that I am on is an even number (being as my rows start on an odd number); the reference returns empty. I have tested to confirm that this only affects even numbered rows. My spread sheet has a 2 row merged cell in column 2, and the cell I am referencing from is on the second row of that merged cell. Here is some
View 2 Replies
View Related
Dec 19, 2013
I am working on an FMEA and have a slight issue.
I have a number of merged cells in Column B.
I have merged 30 rows of column B to one Failure mode let's say 'Gaps'.
In column C there are 30 individual items relating to gaps.
When I want to filter column B to look at Gaps, it only returns the first row of the merged cells. So instead of getting the entire merged cells as a result of my filter, I get 1 row.
I hope this is clear. My question is, is there a method of filtering so that the whole merged cell is returned?
View 2 Replies
View Related
Jun 18, 2007
how to copy the merged cell from closed excel sheet and pasted over into new excel?
View 9 Replies
View Related
Apr 1, 2014
I have a button macro to import pictures to size fit inside a merged cell. I've noticed that the pictures lay over the border and i can't find a way to have it fit inside the border in my code.
[Code]......
View 1 Replies
View Related
Mar 14, 2014
How to add a watermark to the sheet on each tab. Now when the script is called it stops and give the following errors:
Run-time error '1004': cannot change part of a merged cell.
I searched for merged cells in the document and as far as the script is concerned there are none, other than maybe this new watermark.
So, does VBA or scripting think that a watermark is a merged cell?
Any workaround if it does think of it as being merged?
Here is the current script we are using:
[Code] .....
View 3 Replies
View Related
Nov 6, 2008
Is there any quick and easy way to unmerge merged cells and put the merged cell value in all the merged cells. For example, if I have A6:A15 merged together and its value is "FirstMerge" then I would like to unmerge all A6:A15 and then put "FirstMerge" in all the cell A6,A7,A8 etc. etc. upt oA15. I have lot of these merged cells in a sheet and I get this every month and makes any data processing very difficult. A macro or VBA code or any other solution will be fine.
View 4 Replies
View Related
Oct 5, 2011
I feel like I have lost some functionality due to merged cells. For a worksheet change event I have the following:
ElseIf Target.Value = "" Then ... blah blah blah
For a normal cell, every time a cell is deleted (in the appropriate target zone) then it runs the code I have in the subsequent lines
Except it doesn't work for merged cells, unless I manually go into the cell, backspace all of its contents and then press enter
View 9 Replies
View Related
Apr 24, 2002
I can select the merged cell, right click and ClearContents with no problem. But VB aborts with message "Cannot change part of a merged cell".
View 2 Replies
View Related
Nov 8, 2013
I have many columns in my current spreadsheet but I have two columns that I want to split in to two project names.
Currently I have one column with: Project A/Project B And the second column with the total cost of Project A AND Project B combined
The thing is that I can easily just create a new line but that would mean all the data in the other Cells remain the same and the only two that will be different are the above two columns. I will be maintaining alot of rows so I was hoping I do not have to create two rows for every new item then to merge both rows in reach column every time I have to put in a new Item.
I am hoping to have for example the below
Name Comments Project Cost
-------------------------------------------------
Item 1 This item relates Project A $150
to upgrade of Project B $120
SAS system
----------------------------------------------------
Currently I have it as
Name Comments Project Cost
-------------------------------------------------
Item 1 This item relates Project A/B $270
to upgrade of
SAS system
---------------------------------------------------
View 2 Replies
View Related
May 27, 2009
I'm using Office 2007 professional and I'm trying to format a cell (merged cell) so that when you enter text and it goes beyond the size of the designed cell that it will automatically continue and shift the additional text downward, like a paragraph. Also it shift everything below down with it. Is this possible? I have already tried wrap text field and AutoFit row height. This keeps it within the cell but it is not visible or printable once you tab out. I would like to have it continue like in a paragraph. Like a word doc may do. It’s visible and it shifts everything below downward as it grows, which also allows it to be printable.
View 9 Replies
View Related
Feb 24, 2010
Rows a1:a10 are merged and the problem is that all cells next to these are now not wrapping. I remember reading that when a call is merged this is what happens to the cells adjacent, but is there any code that can help to wrap these adjacent cells?
View 9 Replies
View Related
Nov 9, 2006
Currently working on an excel worksheet. I merged 5 rows to a single cell. Want to be able to auto fit all the textl. Enabled auto wrap but when the contect surpass the 5 rows, only portion of the text are appearing. Any way to force the cell to autofit whatever text is within?
View 4 Replies
View Related
Dec 10, 2013
In the attached file I have three merged ranges, A3:C3, D3:F3 and G3:I3.
I would now like to create a formula in each cell in row 1 that will return the date in the corresponding cell in row 3. E.g. A1:C1 will each have the date in merged range A3:C3, etc. The merged ranges in row 3 may not all be three columns wide so any way to extract the dates to row 1.
Attached File : Formulae and Merged Cells.xlsx
View 3 Replies
View Related
Nov 4, 2009
I am doing an export of info from one system and running an excel spreadsheet to manipulate the data. The problem is..That the exported data sometimes will export info into combined cells. Look at attachment
This is what I need...
I need the ability to search all the info on the POC tab and pull it into the info tab, by searching on a system and returning the POC info..
I have tried the vslookup formula and it will return the first row not the second row which is where the info is that I need (shown Highlighted)
=VLOOKUP(A4,POC!A2:b50,2,FALSE)
View 14 Replies
View Related
Apr 6, 2013
I try to unmerge cells A1:A5 based on a value "unmerged" in cell G1.
Also if I select "merged" in cell G1 (data validation), then cells A1 to E1 will merge to a single cell A1.
View 2 Replies
View Related
Oct 12, 2012
Is there a line of code that I can use at the beginning of a macro to unmerge all cells on an entire sheet named "Test1"?
View 4 Replies
View Related
Aug 1, 2007
I would like to test how many cells have been merged in a given cell. I know about the MergeCells property which returns true if the cell is merged. But how do i retrieve the number of merged cells in that cell (supposing it is merged, of course).
View 3 Replies
View Related
Sep 15, 2012
I have a large data which is placed in single cell and I want to copy it into a template which is merged cells any I'm stucked. My data is very large and I can't unmerged the destination data(they are merged vertically). So I wonder is there a way to copy a single cell in a merge cell.
View 1 Replies
View Related
