i was trying to see or figure out if there is a way to bring over information on a row from one sheet to another. I have a sheet with dates in column A and information going across to column h.
as an example i have row 1 that has date in A1, text B1, text C1, nothing in D1 but text in E1 all in Sheet 1.
I want to see if there is a formula that will say if it is todays date then grab that row and bring over the row with the cells that have data
Joe Cheddar 1 2 1
Juan Valdez 1 3 2
Sam Vidal 1 1 2
Betty Juno 2 4 2
...there is only one "1" in a column. So if column 1 has three ones it doesn't return anything. Columns 2 and 3 though have only one occurance of "1." What I need returned is for column two, "Sam Vidal", and for column three, "Joe Cheddar." Column one would show "No Winner"
I have a userform that finds any instance of the user inputted search and tells you which sheet its in and allows u link to them. I also have a number of text boxes that I want populated with the information found on only the activesheet, not both. Currently I get a type mismatch error, and whilst it populates the information in debug mode I also get a Error 2042 on the following
TextBox5.Text = Cells(rngFind.Row, 2)
Option Explicit
Sub locate(Name As String, Data As Range)
Dim rngFind As Range
Dim strFirstFind As String
Dim Find As String
With Data
Set rngFind = ActiveWorkbook.Sheets(1).Cells.Find(Name, LookIn:=xlValues, LookAt:=xlPart)
If Not rngFind Is Nothing Then
strFirstFind = rngFind.Address
Do
If rngFind.Row > 1 Then
ListBox1.AddItem rngFind.Value.....................
I have this data inputted into excel sheet: [URL] .......
This data is in tab called Shops, that has 8 columns of information. In another sheet called control, I have the shops names from row A in a list box. What I am trying to do is when whatever shop is selected in the list box then output the shop information from that row in 8 different cells in another sheet. I have a list of about 200 shops that I need to input.
So if we pick shop, Abc inc from the list box how can I get excel to look up the information in Abc inc in the shops tab of information and then display them on other cells in different sheets.
I have the same issue with making a list box of people names. I made the list box but I want to make it so it will display there phone number and e-mail address in 2 other cells once you pick there names. I had some luck using the if command on smaller list boxes but I can't figure out how to get multiple cells of information to come out correctly
I have created a userform that allows input of information and then deposits the information on a specific sheet. I am looking for a way to have that information not only deposited on the specific sheet it is already set to but also to another sheet based on a selection made from a combo box.
here is my current
Basically I am trying to create a worksheet in which everytime I input information into Sheet 1, it is copied into Sheet 2. I want to have each entry in succession on Sheet 2 such that my first entry would be on Row 2, second on Row 3, third on Row 4, etc. However, everytime I put something new in Sheet 1, it just overrides the information in Sheet 2.
Basically I type in ticket sales in sheet 1, it calculates the prices and keeps a transaction log in sheet 2. But everytime I do a new ticket sale, it just overwrites the previous transaction witht he new transaction information. I've pasted my VBA below:
Sheet 1 VBA:
Code:
Option Explicit
'Form level variables - used in more than one event
Dim intAdult As Integer
Dim intStudentSenior As Integer
Dim intBalcony As Integer
Dim intChild As Integer
Dim sngAmountDue As Single
[Code] .......
Sheet 2 code:
Private Sub cmdSummary_Click()
'Declare Variables
Dim intCount As Integer
Dim i As Integer
Dim intAdult As Integer
Dim intStudentSenior As Integer
[Code] ......
Imagine I have 2 columns of information that look like this:
Column A
Column B
AS
Dog
AS
Cat
AS
Hamster
FT
Fish
These are my key columns. The letters are initials of people and the animals are the pets they're responsible for.
Now, I have 3 more columns that look like this:
Column D
Column E
Column F
These columns can go on for hundreds of rows.
What I want to do is pull out the information from columns D, E and F where the initials and pet match those in the key list, then paste that elsewhere (say to columns J, K and L).
So, for instance, the first entry would be copied across because, according to the key list, AS is responsible for a Dog, but the bottom entry for AS wouldn't because he was looking after a fish, and that pet isn't listed as one of his animals in the key list (Fish is listed alongside FT). Likewise, the entry for AH wouldn't come across because AH doesn't appear on the key list at all.
I am trying to use the following code to compare the password that was entered, to the one that is stored in the worksheet to make the user aware that the password they have entered is incorrect
View 2 Replies View RelatedI have the following table:
A
B
C
D
E
F
1
Most Recent
1st
2nd
3rd
4th
5th
[Code] ......
I am wanting to populate the "Most Recent" column by selecting the last value in each row between B to F so that I get the following result:
A
B
C
D
E
F
1
Most Recent
1st
2nd
3rd
4th
5th
[Code] ........
I am also wanting the result under Column A to indicate by cell colour red if the value is less than the previous value and by cell colour green if the value is equal to or greater than the previous value.
For example; Cell A2 should be highlighted green because the last value which is D2 is greater than the previous value in C2. While Cell A4 should be highlighted red because the last value which is C4 is less than the previous value in B4.
I do have another question actually. In the Total Sales worksheet, I have a a cell in S2 that I wish to show the max value from the "total sales" colum and then show the first and last name related to that particular row where the max value was. so, I only have =MAX(O2:O112), but I want to show the Name associated with the max and not just the $ amount.
So in S2 I want ---> John Doe and not $512.50, but I can only think of =IF(MAX(O2:O112), $B2+$B3, 0) becase I want both the first and last name. I used this formula with only $B2, but it just returned the first name in the B2 field
i have this formula in cell e28 =IF(B28<>"",LOOKUP(B28,STOCK!A1:A500,STOCK!B1:B500),"") and when its empty it returns a blank cell
but in cell e29 i have exactly the same formula =IF(B29<>"",LOOKUP(B29,STOCK!A1:A500,STOCK!B1:B500),"") but i returns #n/a
why is this and how do i stop it i want the cell to be empty unless there is a code entered in b29 in which case it will look up the relevant info for me
I have a sheet with this:
cell a1 = numbers from 1 to 10 or nothing
cell b1 = TO or OFF depending on cell a1
cell c1 = numbers from 1 to 10 or nothing
Now I have a formula in cell b1 that detects if theres text in cell a1.
IF A1 = nothing, then b1 = off, else b1 = to.
What I want to achieve is to do 2 things on the IF.
If a1 = nothing, then c1 = nothing and b1 = off. else, b1 = to.
how can I do this?
I looked everywhere and no one speaks of double answers on IF.
i have a drop down list in cell b16 which then corresponds with what to bring up in the next drop down list in cell d29 this works fine.
View 2 Replies View RelatedI am trying to create a formula that will search a row left to right for the first instance of zero and return the corresponding column label. I had this working for a smaller table using a couple of hidden columns with nested ifs however the new data set is approximately 25 columns wide and it will get very messy using the same approach. See attached sample with desired results.
View 2 Replies View RelatedI have just decided to dable in the 'VLOOKUP' function. I have looked at a few examples on the net and I have tried to replicate them with no luck (I have modified titles and values). I have attached my example to this post.
View 2 Replies View RelatedIf I have a column full of data is there a way to copy every nth row to a new column? For example, I may have dates and corresponding days of the week. Can I copy the date of each tuesday (i.e. every 7th row) to a new column?
View 2 Replies View Relatedcode to scan a datasheet for a value and return "MATCH" if it is found and to return "ERROR" written in Red or Yellow if it is not found.
View 4 Replies View RelatedI am building a form that uses a combo box to lookup up a row in a table and return row data. To make things more complicated I want to return more than one record. For example: the table has a list of jersey. I search for a style jersey. I want to search the list and return all the colours for the chosen style. Sometimes there is only one colour or there can be up to 10. Have a look a the attached example.
View 2 Replies View RelatedI am trying to use a sub to count files that some one has helpd me out with in the past. It was working but for some reason now it is not. I always have 0 returned as the number of files in the selected location (SourcePath), which is a filthy lie as there are files in there. The idea is that all .xls and all .xml files are deleted, and then if the folder is empty, that is also deleted, but as the Count_Files sub is always returning 0 the code is trying to delete the folder, which causes an error as it has files in it.
View 8 Replies View Related=IF(ISERROR(VLOOKUP(B14,'Metal Worksheet'!$A$8:$L$157,11,FALSE)),"",VLOOKUP(B14,'Metal Worksheet'!$A$8:$L$157,10,FALSE))*D14
As long as the lookup value is true the formula works but if the lookup value is false then I get #value! when it tries to multiply by D14. How do i get the formula to return a blank cell or 0 value if the lookup value is false?
I would like to get the last value in column A & B and place them into another sheets cell. The number of rows will always be changing too.. In the attached spreadsheet I want the totals, which is the very last value in the colums.
View 8 Replies View RelatedI am including the entire code. It does a regression analysis on data for a second degree polynomial. In doing so, it creates a worksheet called Regression. So I test first to see if this sheet already exists within the workbook and then ask the user to delete it if it does. I've stepped through the function and the function is always returning False whether Regression exists or not.
View 5 Replies View RelatedI currently have a range of documents which I know the name of but not the file extension. The Macro I have been working with is fantastic for checking the existance of the file but I need it to also return the file name if it finds a match. I am currently using Excel from the 2007 Small Business Suite on a Windows XP PC. The Code I am currently using works as follows:
View 4 Replies View RelatedI want my worksheet to search a column for a specific date (3-Dec-2008, for example) and count cells containing only that specific date. If it finds the date, I want it to count them.
However, if that particular date doesn't appear in the column, it returns 0. I want the cell to return blank. Basically, instead of giving me 0, I want it to return empty. I've tried IF statements, COUNTIF statements, combinations of IF/COUNTIF statements.
=AVERAGEIFS(Activity!K2:K80,Activity!A2:A55,"Complete",Activity!C2:C62,"Oakpointe")
K2:K80 holds dollar amounts. I would like the average of those dollar amounts where Column A=Complete, and Column C=Oakpointe
For some reason it won't return the average. Could it be because Column A can C are dropdowns?
I'm hoping someone can help. I've written a =VLOOKUP formula that works fine. What I'd like to do is if the value can't be found within the lookup then the formula returns a 0 rather than the standard #N/A. Can these be joined up in 1 formula?
View 6 Replies View RelatedI am using the following formula, but for the cells that dont have data I get the #DIV/0! error.
=AVERAGEIF($B$6:$B$48,B59,$W$6:$W$48)
I need to search across 15 columns and return the lowest value in that row? How to do this?
View 8 Replies View RelatedI have this code
Code:
Selection.FormulaR1C1Local = "=INDIRECT(CONCATENATE(""["",R4C26,""]Sheet1!"",RC))"
Which creates this in the excel cell:
=INDIRECT(CONCATENATE("[",$Z$4,"]Sheet1!",D4))
But for some reason, it returns a 0. However, when I change the code in the excel cell to this
=INDIRECT(CONCATENATE("[",$Z$4,"]Sheet1!D4"))
It works. But I need to be able to change D4 in the macro, so doing it that way won't work for me.
The message box in the Standard module procedure returns 00:00:06.
Standard Module
Code:
Sub New33()
Dim clsCampaign As CCampaign
Set clsCampaign = New CCampaign
clsCampaign.MailCode = "AWSXBETC"
[Code]....
Code:
Option Explicit
Public MailCode As String
Public LandDate As Date
Public MailDate As Date
Public FirstPanel As Date
Public FinalPanel As Date