=AVERAGEIFS(Activity!K2:K80,Activity!A2:A55,"Complete",Activity!C2:C62,"Oakpointe")
K2:K80 holds dollar amounts. I would like the average of those dollar amounts where Column A=Complete, and Column C=Oakpointe
For some reason it won't return the average. Could it be because Column A can C are dropdowns?
TotHCInv.Value = WorksheetFunction. Sum(KRInv, PBLInv, CRInv, PVInv)
If i >= 34 Then CPSCtphRMA.Value = WorksheetFunction.Average("G" & (i - 30) & ":G" & i)
The first line runs properly, but the second line bugs out with the error message "Unable to get the Average property of the WorksheetFunction class". I can simply do the math, but I thought that using the worksheet function would be easier than summing and dividing. I'm curious, though, as to why I can't seem to use the Average function.
I am trying to average a data set where some rows at the moment are blank but will update at a later date, I am getting a div/0 error, the formula I am trying to use is
=IF(C23:C30="","",AVERAGE(C23:C30))
I thought this would look at the data and see if its blank leave it blank but if there are numbers there it would give me an average.
I have a table, let's call it Table1. Each column has the ability to filter but no filters are applied at the outset of this issue. I want to average a column labeled Column13. I also want to apply a filter to Column13 that states only show values over 50%. I apply the filter and in the cell I want the average calculated in I type the formula:
"=AVERAGE(101,Table1[Column13])"
The 101 (as far as I'm lead to believe) only applies the average to the rows *SHOWN*. However, the average I get back is 45.67%. This is obviously wrong as the filter states only show rows where the column is greater than 50%.
E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
i have two columns...a and b (a w/ names, and b w/grades). then i have the table lookup with names and grades all mixed up for many rows. i want to be able to average the grades with appropriate names.
=average(vlookup(name, table, column, false))?? i don't get it to work and how can i specify the grade to average?
Can I get a minimum average and a maximum average, I have a worksheet with days of supply for 100 stores with about 100-200 products each, the dos resides in column D.
I was going to create a summary page and reference column d.
The following just gives me the min, I want the min average if possible:
I am attempting to calculate Grade point averages for my students for all classes. There are 5 columns of grades to be considered. I frist assign values of 0-5 to the grades then average the points. My problem is that I want the AVERAGE to ignore the zero but it calculates it as well. (I enter a 0 if I have no grade for that class.) I have tried the{ } to make it an array formula but this also did not work. Here is what I have, can anyone help?
=SUM(AVERAGE(IF(AND(L2>89,L2<100),5,IF(AND(L2<90,L2>79),4,IF(AND(L2>69,L2<80),3,IF(AND(L2<70,L2>59), 2,IF(AND(L2>0,L2<60),1,0))))),IF(AND(T2>89,T2<100),5,IF(AND(T2<90,T2>79),4,IF(AND(T2>69,T2<80),3,IF( AND(T2<70,T2>59),2,IF(AND(T2>0,T2<60),1,0))))),IF(AND(AB2>89,AB2<100),5,IF(AND(AB2<90,AB2>79),4,IF(A ND(AB2>69,AB2<80),3,IF(AND(AB2<70,AB2>59),2,IF(AND(AB2>0,AB2<60),1,0))))),IF(AND(AJ2>89,AJ2<100),5,I F(AND(AJ2<90,AJ2>79),4,IF(AND(AJ2>69,AJ2<80),3,IF(AND(AJ2<70,AJ2>59),2,IF(AND(AJ2>0,AJ2<60),1,0))))) ,IF(AND(AR2>89,AR2<100),5,IF(AND(AR2<90,AR2>79),4,IF(AND(AR2>69,AR2<80),3,IF(AND(AR2<70,AR2>59),2,IF (AND(AR2>0,AR2<60),1,0)))))),-1)
I know it is huge. The syntax is correct. It calculates the average, but always for all 5 columns. It will not ignore a 0 in a column.
I'm using the formula =AVERAGE(B16:L16) to give me the average.
However I have a couple of problems with this. Firstly I would like to exclude the value zero from the average. Secondly to also ignore the lowest and highest values.
Example, if the values in the cells are 0,1,2,3,4,5,6,7,8,9,10 then the current result shows 5, by ignoring the 0 and lowest value 1 and highest value 10 the average should be 4.5.
Ok, I for some reason just cant wrap my head around this. I need to to get the average time per call of two rows, but they are based on how many calls taken.
so in one column i have 50168 calls taken at 4:21 seconds per call. and in the next row i have 597 calls taken at 5:20 per call. I need to see what the new average will be with them combined, and I need it to display in m:ss form.
to formulate Excel formulas to obtain the average buy price and average sell price for me to do this futures trading. Thanks a lot. I downloaded the Htmlmaker to post the spreadsheet here to show the manual way to calcualte the average buy price and average sell price but when it is on html form, i clicked on the 'Please click this button to send the source into clipboard' button & then i paste into this thread. Is the way to make my spreadsheet appear here correct cause it cannot work.
View 9 Replies View RelatedI am trying to use the following code to compare the password that was entered, to the one that is stored in the worksheet to make the user aware that the password they have entered is incorrect
View 2 Replies View RelatedI have the following table:
A
B
C
D
E
F
1
Most Recent
1st
2nd
3rd
4th
5th
[Code] ......
I am wanting to populate the "Most Recent" column by selecting the last value in each row between B to F so that I get the following result:
A
B
C
D
E
F
1
Most Recent
1st
2nd
3rd
4th
5th
[Code] ........
I am also wanting the result under Column A to indicate by cell colour red if the value is less than the previous value and by cell colour green if the value is equal to or greater than the previous value.
For example; Cell A2 should be highlighted green because the last value which is D2 is greater than the previous value in C2. While Cell A4 should be highlighted red because the last value which is C4 is less than the previous value in B4.
I do have another question actually. In the Total Sales worksheet, I have a a cell in S2 that I wish to show the max value from the "total sales" colum and then show the first and last name related to that particular row where the max value was. so, I only have =MAX(O2:O112), but I want to show the Name associated with the max and not just the $ amount.
So in S2 I want ---> John Doe and not $512.50, but I can only think of =IF(MAX(O2:O112), $B2+$B3, 0) becase I want both the first and last name. I used this formula with only $B2, but it just returned the first name in the B2 field
i have this formula in cell e28 =IF(B28<>"",LOOKUP(B28,STOCK!A1:A500,STOCK!B1:B500),"") and when its empty it returns a blank cell
but in cell e29 i have exactly the same formula =IF(B29<>"",LOOKUP(B29,STOCK!A1:A500,STOCK!B1:B500),"") but i returns #n/a
why is this and how do i stop it i want the cell to be empty unless there is a code entered in b29 in which case it will look up the relevant info for me
I have a sheet with this:
cell a1 = numbers from 1 to 10 or nothing
cell b1 = TO or OFF depending on cell a1
cell c1 = numbers from 1 to 10 or nothing
Now I have a formula in cell b1 that detects if theres text in cell a1.
IF A1 = nothing, then b1 = off, else b1 = to.
What I want to achieve is to do 2 things on the IF.
If a1 = nothing, then c1 = nothing and b1 = off. else, b1 = to.
how can I do this?
I looked everywhere and no one speaks of double answers on IF.
i have a drop down list in cell b16 which then corresponds with what to bring up in the next drop down list in cell d29 this works fine.
View 2 Replies View RelatedI am trying to create a formula that will search a row left to right for the first instance of zero and return the corresponding column label. I had this working for a smaller table using a couple of hidden columns with nested ifs however the new data set is approximately 25 columns wide and it will get very messy using the same approach. See attached sample with desired results.
View 2 Replies View RelatedI have just decided to dable in the 'VLOOKUP' function. I have looked at a few examples on the net and I have tried to replicate them with no luck (I have modified titles and values). I have attached my example to this post.
View 2 Replies View RelatedIf I have a column full of data is there a way to copy every nth row to a new column? For example, I may have dates and corresponding days of the week. Can I copy the date of each tuesday (i.e. every 7th row) to a new column?
View 2 Replies View Relatedcode to scan a datasheet for a value and return "MATCH" if it is found and to return "ERROR" written in Red or Yellow if it is not found.
View 4 Replies View Relatedi was trying to see or figure out if there is a way to bring over information on a row from one sheet to another. I have a sheet with dates in column A and information going across to column h.
as an example i have row 1 that has date in A1, text B1, text C1, nothing in D1 but text in E1 all in Sheet 1.
I want to see if there is a formula that will say if it is todays date then grab that row and bring over the row with the cells that have data
I am building a form that uses a combo box to lookup up a row in a table and return row data. To make things more complicated I want to return more than one record. For example: the table has a list of jersey. I search for a style jersey. I want to search the list and return all the colours for the chosen style. Sometimes there is only one colour or there can be up to 10. Have a look a the attached example.
View 2 Replies View RelatedI am trying to use a sub to count files that some one has helpd me out with in the past. It was working but for some reason now it is not. I always have 0 returned as the number of files in the selected location (SourcePath), which is a filthy lie as there are files in there. The idea is that all .xls and all .xml files are deleted, and then if the folder is empty, that is also deleted, but as the Count_Files sub is always returning 0 the code is trying to delete the folder, which causes an error as it has files in it.
View 8 Replies View Related=IF(ISERROR(VLOOKUP(B14,'Metal Worksheet'!$A$8:$L$157,11,FALSE)),"",VLOOKUP(B14,'Metal Worksheet'!$A$8:$L$157,10,FALSE))*D14
As long as the lookup value is true the formula works but if the lookup value is false then I get #value! when it tries to multiply by D14. How do i get the formula to return a blank cell or 0 value if the lookup value is false?
I would like to get the last value in column A & B and place them into another sheets cell. The number of rows will always be changing too.. In the attached spreadsheet I want the totals, which is the very last value in the colums.
View 8 Replies View RelatedI am including the entire code. It does a regression analysis on data for a second degree polynomial. In doing so, it creates a worksheet called Regression. So I test first to see if this sheet already exists within the workbook and then ask the user to delete it if it does. I've stepped through the function and the function is always returning False whether Regression exists or not.
View 5 Replies View RelatedI currently have a range of documents which I know the name of but not the file extension. The Macro I have been working with is fantastic for checking the existance of the file but I need it to also return the file name if it finds a match. I am currently using Excel from the 2007 Small Business Suite on a Windows XP PC. The Code I am currently using works as follows:
View 4 Replies View RelatedI want my worksheet to search a column for a specific date (3-Dec-2008, for example) and count cells containing only that specific date. If it finds the date, I want it to count them.
However, if that particular date doesn't appear in the column, it returns 0. I want the cell to return blank. Basically, instead of giving me 0, I want it to return empty. I've tried IF statements, COUNTIF statements, combinations of IF/COUNTIF statements.
I'm hoping someone can help. I've written a =VLOOKUP formula that works fine. What I'd like to do is if the value can't be found within the lookup then the formula returns a 0 rather than the standard #N/A. Can these be joined up in 1 formula?
View 6 Replies View Related