Private Sub Worksheet_FollowHyperlink(ByVal Target As Hyperlink)
If Target.Range.Address "$A$1" Then macro1
Exit Sub
End Sub
I want so when i click on cell A1 it will run macro1.
So far the click on the cell works, but it works with every single cell I click on. How to I get it to just work with cell A1 instead of everyone single cell I click on?
Also, there are about 30 different cells that will run different macros, how would I go about creating adding the code the one above without having to create separate sub worksheets?
I have a macro where I manually select a cell then the macro kicks in to copy and paste the contents into the Find function. From there it goes to another work sheet, clicks on a cell in column one and searches for matching cell contents. Then If false it manually goes back to the original worksheet/cell and then I input a N in the left adjacent cell. If true I enter a Y. Right now I can only run this for the specific cell the macro was recorded for. I would like to expand this.
What I would like to do create a loop in the macro that waits for my cell choice input then continues with the with the Find function. If false the macro should just loop back to the original worksheet/cell and wait for input, ie the next cell selected. However, if true a worksheet/cell is selected, a Y is input and it loops back to the original cell and waits for input.
i have macro that opens up a calendar and inserts a date. i'd like it to automatically run when a particular cell is clicked. i don't want it to run for all cells, just cells in a certain column.
I have a sheet where i have many differently named areas (like state1_1 and state1_2) When I doubleclick on a cell then a macro should run with following criteria: 1) Macro will run if the doubleclicked cell is part of any range in the list. Here I mean that names of ranges which belong to that list start with word state (like state1_1 and state1_2). No other ranges should not be in that list. If the cell is not in the range that is part of the list, then nothing should happen.
I am trying to run a macro when I double click on a certain cell (D34). The cell has data in it (Southeast NSC). What I am expecting to happen is once I double click on the cell the macro will run the retrieve and I will end up at expense chart page.
The macro I am trying to run is an Essbase retrieve.
I know it is possible to run a macro when clicking a specific cell in a worksheet. Is is possible to run a macro when click ANY cell in a specific column.
I am making a checklist for a Pda program. I need the active cell to highlight green and put an x in it for a specified range. This I have
The next part I cannot figure out - after the cell have been highlighted once, and properly colored with an x, how can I get it to delete the fill and clear the x on the next click.
Dim x As Long Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range) ' Set the highlighted cell to a color. If Not Intersect(Target, Range("d28:d34")) Is Nothing Then Target.Interior.ColorIndex = 4 ' green = true 'Set the highlighted cell to contain a text character If Not Intersect(Target, Range("d28:d34")) Is Nothing Then ActiveCell = "x" End If End If End Sub
Upon clicking any cell in Sheet1, it will automatically filter based on cell A and B.
Sheet2
Automaticall display filtered criteria based on double click from Sheet1
For example: when I double click on C1, on Sheet2 will automatically diplay filtered data based on A1 and B1 and same thing goes to if I double clik on C2 on Sheet2 will automatically diplay filtered data based on A1 and B2.
I have many workbooks that I receive from clients I run various Excel VBA macros on depending on which workbook it is, and I need to automate all of this so that anyone can run an simple .exe user interface designed in VB 2005 Express Edition where when that interface is run, a window opens on the destop with a collection of buttons, when the user clicks one of the buttons, Excel launches, loads the appropriate file and runs an already-existing appropriate Excel macro, then some file maintenance is done, like moving a group of files from one subdirectory to another.
I want the user of a file to be able to click on a particular cell and if they right click an option 'Change' will appear on the list of options and on clicking it a macro is enabled.
On a spreadsheet I have a button which has a macro assigned to it, for some reason when I protect the worksheet then then click the button, nothing happens (or though I do get egg timer for a second). but when I unprotect the shet its fine.
ive used this type of method many tiems, and cant see what the problem is, have tried all combination of locking and unlocking cells in and around etc, but nothign changes it.
I have populated a listbox from a filtered list and when 'Double Clicking' a name I want a macro to run. All seems to be OK apart from it is not finding/returning any data; I know the data is there and I think it may be the way I'm referencing the listbox value;
Sub CopySignificant()
Dim DestSheet As Worksheet Set DestSheet = Worksheets("Clients to Invoice")
Dim sRow As Long 'row index on source worksheet Dim dRow As Long 'row index on destination worksheet Dim sCount As Long sCount = 0 dRow = 1...................
I want a X to be put in the activecell if empty or removed if already there. By searching this forum I found and read the article "Adding a Command Button to the Excel Right Click Pop-up Toolbar/Command Bar" and was able to add the code to do this to the right click sub menu. Is there a way to do the same thing by double clicking on the cell? This probably seems a bit nit pickey but I would just like for it to work using double click for my users. I wrote the following code to performe the action
Sub Toggle_Macro() If IsEmpty(ActiveCell) = True Then ActiveCell.Value = "X" With Selection .HorizontalAlignment = xlCenter End With With Selection.Font .Name = "Arial" .FontStyle = "Bold" .Size = 12 .ColorIndex = 3 End With Else: Selection.ClearContents End If End Sub
And placed the code below in Private Module of the Workbook Object.................
I am looking for a macro that can click on a link within a website. This link produces a print window. Below is some similar code that I have used before but this link does not have an ID so I am not sure what to do. I am also posting the HTML Code and a jpeg of the HTML code.
Each macro is assigned to its own button, Clear and Restore. What I'm trying to do is make it so that the macro attached to the Restore button will not activiate unless the Clear macro attached to the Clear button is clicked first and visa versa. I can't see to find anthing quite like it in my research.
I wanted to add a counter macro where when a certain image is clicked on my spreadsheet, it will add 1 or take away 1 number in a specified cell on my spreadsheet. For instance, if my cell A1 had the number 0 in it, and I had 2 images beside it (a "+" and a "-"), when the "+" image is clicked, I need it to add 1 to cell A1, making it 1, and vice versa if clicking the "-" image for -1. I want it to be cumulative, so every time you click "+", the number in A1 will increase to 1, 2, 3, 4, etc, and same with the "-" making it -1, -2, -3, -4, etc.
my right mouse-clicker doesn't work in excel anymore. something with macros happened I guess.
has anybody an idea to activate it again?? it's just in the workfield, to change worksheets-colours and stuff at the worksheet-registry it works as usual.
I have set up a macro that opens a set of about 20 excel files, one at a time,and then copies select sheets, and then pastes into a different main spreadsheet. After each sheet is opened and copied/pasted, I close it out and open the next one. My problem is I keep having to click through messages while the macro is running. I encounter the following messages:
1. Do you want to save (file that I opened and copied from)?
2. The formula or sheet that you want to copy contains the name "asdf.." which already exists on the destination worksheet. Do you want to use this version of the name?
3. A box comes up that says update values from this file:
4. There is a large amount of information on the clipboard. Do you want to be able to post this information into the clipboard later?
I would rather ignore all of these message boxes, but my answers to them are as follows: 1. No i do not want to save 2. Yes I want to use that version of the name 3. I want to select cancel out of this 4. No i do not want to be able to post that information.
I am trying to prepare macro to navigate web page and click on some tasks to complete it. As this web link is not access-able from outside or remotely. I am trying to work on it in bits. I have came across with a first problem of clicking on one of the link of this web page, below is the web page html source code. I want to click on last link "Total Outstanding Tasks".
I would like to click on my chart, which then gets resized automatically depending on its current size.
Situation:
My main macro creates various charts, all of them I connect to the macro "chartMakro". After the main macro has finished successfully, I can click on such a chart and the macro "chartMakro" is launched, supposedly resizing the chart. unfortunately i do NOT know how to tell the macro which is the active sheet, therefore my macro fails to work.
Question: When a click on a chart launches a macro, how can I tell the macro which chart called it?
'appending a macro to a chart ' MAIN MACRO '[...] activeChart.ChartArea.Select ActiveWindow.Visible = False Selection.OnAction = "chartMakro"............
