I have attached the file with this post.
What I like a macro to do is:
Whenever a 'D' ends in column "Step 5" the last value of 4 cells to the left to be put in sheet 2 in reverse order.
Basically, I need to copy and paste upon certain condition (references) and paste related-datas in another sheet corresponding with these references. Every references are organized by lines with indicators on columns.
In attached file, see:
- worksheet ANALYSIS:
* datas in E2, G2, D18, D19, D20, D21, D22 that needs to be copy based on reference in C2,
* then need to find this reference in worksheet called GROUP SAVE,
* and based on this reference, paste above cells value in corresponding "Indicators" column number
THEN, I will have to do pretty much the same with subgroup data. But I can figure out for this second step that request same manipulation.
i am trying to Put a specific value i,e "NO Deliveries" in blank Cells in the same row based on value in 1st cell of the Row which has a fixed value . note:the columns and rows are dynamic for example: I want to put the value "no Deliveries" in cell C because its blank.
A B C D
% of Availability
0.00%
80.00%
i want to copy a row from one sheet and paste it in another sheet based on a condition.
View 5 Replies View RelatedIs there a way to make a cell populate certain text based on conditions of other cells without putting the formula in the cell you want to populate. So that someone could type other text into the cell if the conditions were not met?
View 14 Replies View RelatedI wanted to know if it was possible for me to be able to copy a whole row into a different sheet based on a column value. For example, if B6 = CLOSE, the whole row would be coppied to the sheet name CLOSE. If B6 = OCCUPIED it would be copied to sheet name OCCUPIED. I also need if W7 = to a date thats passed today it would be added to the sheet name EXP PRD. An off topic question, i have this code for column "W":
=COUNTIF(W6:AD155,">"&TODAY()+15)
It works just fine, but I also have "N/A" / "INDEF" in the blocks as well so it's not giving me the correct results. I'm using Excel 2003.
In the workbook, 3 columns of importance Column N,S and AC. Concatenate order ("S"&"N"&"AC") - combine it and show value in column AG. Column AC has either 0 or any other number (50,60,100 etc). If it is 0 I need to insert an 'F' at the end of the code in column AG, any other numbr and i need an 'O'.
Column N has contract code, this will be in the middle, usually its alphabets like RF,EF, but sometimes numbers like 21,33, etc but when its a single digit number like 6, i need it changed to 06 (need the 0 infront). Column S has exchange codes, and this has to appear in the front of the code in Column AG. Same as Column N, if there is a single digit number then put a 0 infront of it.
I need to be able to fill a cell in the same row based on values in two other cells in different columns.
Current Layout. Call these columns A, B, and C
I have 3 different states I work with, OH, IL and PA. There are different tax exemptions based on whether or not the class is RES or COM.
Conditions:
State = PA, Class = RES, Tax Exempt = 1
State = PA, Class = COM, Tax Exempt = Null (not "0")
For all other states, Tax Exempt will always = 1
I need the VBA code that will autofill column B with the proper Tax Exempt status based upon columns A and C.
The code I have now just looks at the first value in columns A and C then fills all of column B with that number.
Column A has data e.g. cat is fat xy>zzy, dog is random xyzzy, rat is a hoax.set xyz, frog is alon.23e xyz, bullseye.8 x.z
I have a look up table as below:
Col D
xy>zzy
xyz
x.z
(Note: the values in Col D do not have a set number of characters, so I cant use a Right/left Formula)
I need a lookup to look for the values in Col D within Col A and return the values in Col D. Is this possible?
All I really need is col D characters separated from the first word/words.
I've created (with the help of jmthompson from here) a macro to pull an entire row of data and copy to another sheet (Sheet1) if column U has "YES" in the cell.
Now I need to clear the contents of cells in range B-U after the copy has occurred.
Here's the current macro: ...
I am trying to Excel VBA for doing an AutoSum function in Excel.I am struggling as the recorded macro is giving me fixed ranges whereas the number of rows would be different each time. What I need that the Delivery Qty in Column C be a Total whenever there is a text "Results" in column B?This should happen for every row with Results as a text.In Excel the Autosum feature should take care of this but I am unable to write a VBA code to do this.
Before
DeliveryAct.goods issue dateDelivery Qty
800205573906/05/20094
Results
800205657806/01/200921
Results
800206322306/02/200910
800206322306/02/200915
800206322306/02/200942
800206322306/02/200940
Results
800206322806/02/200941
800206322806/02/200910
800206322806/02/2009455
800206322806/02/2009410
800206322806/02/2009485
800206322806/02/2009785
800206322806/02/200944
Results.................................
Basicalley I have a series of columns, each 5 letters together represent an order(a,b,c,d,e), the columns are repeated approximately 15 times, similar to the following;
Bag Size:B/G5lb2lb 16oz8ozB/G 5lb 2lb (repeat...)
Catagory 1ABCDEA1 B1 C1 (repeat...)
Catagory 2 AABBCCDDEEAA1 BB1 CC1 (repeat...)
(...Repeat)
The B/G stands for Whole Bean, or Ground, the A's are drop down lists giving those 2 options, the other cells (non-A's) are all numeric. At the end of each row, the orders need to be summed up into categories; 5lb whole, 5lb ground, 2lbs whole, 2lbs ground, 16 whole, 16 ground etc..
I am looking for a way to sum each category for all orders as necessary, in one cell adding all B's (in that row for that catagory) if its corresponding A is whole bean, in the next summing all b's if its corresponding A is Ground. The same will go for the C's D's and E's.
I am trying to automatically merge cells based upon a condition in different cell. Below is the example of what I would like to achieve.
Apple
Red
Apple
Red
Apple
Red
[Code] ......
I will have 2 columns. In column B, will be a list of invoice numbers. Now each one starts with the "job number" (Ex. 51APGC01) then a dash and unique number per invoice. (Ex. 51APGC01-01)
In column A, will be a list of Purchase Order numbers sent by the customer so we can bill. Now, sometimes we get one PO for multiple invoices, (Ex. 03, 05, 06, 07.....)
What I am looking to do, is when I get these PO's, I enter them in and then I print a report for our billing Dept. The way the output line (cell) will read, is Job Number, then each unique number: (51APGC01-03, 05, 06, 07)
There are multiple jobs and each one has it's own report, so the job number will be dynamic and defined else where in the workbook. I can define that. It's just getting the numbers after the "-" and putting them in only.
I need the macro that looks in to say Column H sheet1, if value ="true" then copy cells in column A, B, D, F to Sheet2.
View 2 Replies View Related"copy cell range based on conditions" and it didnt really get an answer. There was one that copied the info the next blank cell on that line, but im not smart enough yet to figure out how to copy it over. ( getting there though with lots of staring at code).
2 sheets. I have already created auto modules to fill in data and code,and sorted the columns so they are in line.
Sheet 1. Info : has 9 columns. So if column = 9 and the value = new.
Then i want to copy the range on the columns (A:G) and then paste it on the other sheet ( Card info) as long as Column A is empty ( as in next available blank cell) ( something like a DO while worksheet("Card info").column(A) <> ""
I am trying to do some thing simple, but i causes me a lot of problem in several areas. I am using the
sheets( range("c5")).select
to simply select the sheet that is named in cell c5 on the current sheet. can anyone give me a correct way to accomplish this that I can use in other applications that i come accross?
Putting Text From A Textbox To A Cell On A Sheet. how do you do this?
View 5 Replies View RelatedI am self-taught (arguably by a pretty shoddy teacher), and am determined to figure *some* of this stuff out. I need a code to look at the rows on one worksheet and based on the value of column A for each row, copy cells A through E in that row to cells A through E of a blank row on a corresponding worksheet. I found a code from another post that does just what I need it to with one small exception. The code was posted by DaveGuggs and is as follows:
View 2 Replies View RelatedI have a cell in A1=(str identification is = ",) and in B1=(2). In C1 I want it to equal (str identification is = ",02) In C1 I have A1&B1
View 4 Replies View RelatedI am trying to select all unlock cells in the active sheet. However, my method checks through each cell in the sheet and it takes too long.
Sub SelectUnlockedCells()
Dim rng As Range
If IsNull(Cells.Locked) Then
'if null then there is unlocked cells
For Each c In cells
If c.Locked = False Then
If rng Is Nothing Then
Set rng = c
Else
Set rng = Union(rng, c)
End If
End If
Next c
Else
End If
If rng Is Nothing Then Exit Sub
rng.Select
End Sub
I am having trouble getting the selection of sheets to work. I have a workbook that has multiple sheets and one constant sheet (Summary). There is code to create new forms in this workbook and insert them after the Summary sheet. These forms all have a date input that is formatted as a date (mm/dd/yyyy), these dates get modified on the day the form is created, there may be any number of sheets created during this process. I have to print the summary sheet and only the newest forms created. I need a code to select sheets to print based on the date input of a user for each form. This is what I have so far:
VB:
Dim i As Variant
i = Range("B5").Value >= InputBox("What date to start PDF from? Format = mm/dd/yyyy")
Sheets(Array("i")).Select [code]....
If the dim can be taken out and just included in the line for the array that would be fine with me. The cell "B5" is where the date is located in each form. I want to input a date and the macro will select the sheets where the date is equal to and greater than the date entered. The Summary sheet will always be included in the print set. I have a dialog box for setting which printer to use - this file will be used at different offices and therefor the printers will be different and it will also allow to create a PDF if desired.
I managed to create some code that will connect to a workbook and take the data from there.
It is kind of SQL mixed with VBA. I just got this by finding it in google (I don't have the link handy now).
What the file does, is it will take 2 columns from a workbook called "Test.xls" and then take out 2 columns "Name" and "ID".
The only thing is, this is only a test and not the actual files I need to open. the files are always saved on the same folder, but the name is the day of the export of it. So when I export a file today, it will get 2014.09.10.xls. The sheet (only 1) will also get that name.
How could I change the below code that it will take that file based on today's date and read from the sheet with today's data?
VB:
Sub sbADO()
Dim sSQLQry As String
Dim ReturnArray
Dim Conn As New ADODB.Connection
Dim mrs As New ADODB.Recordset
Dim DBPath As String, sconnect As String
'DBPath = ThisWorkbook.FullName
[Code] ....
I'm trying to create a macro that will allow the user to select a range of cells, (in column V in the attached sample), and then insert a new worksheet and copy the entire row where the user selected the cells to that worksheet.
For example: (I've deleted most of the data from the sample). The user want to create an order that has an exteded cube of 300 feet. By holding the "Ctrl" key down, they could pick and choose the parts they want to add, until the sum in Excel shows nearly 300.00 extended cube. They would then run the macro, which would copy only the rows which the user has selected in column V to the new worksheet.
I have a sheet with 2 colomns: client number and document number, as follows:
Client number Document number
1234 100012
1234 100042
4321 102233
4321 249123
4321 533213
4567 134123
7890 123451
7890 125675
7890 357353
I need to have a unique client numnber on 1 row with all his documents in one cell, as follows:
client number: document number
1234 100012, 100042
4321 102233, 249123, 533213
4567 134123
7890 123451, 125675, 357353
In column A of my worksheet I have values starting from A4 as below:
A4-1000
A5-1000
A6-1000
A7-2000
A8-2000
A9-1500
A10-2200
A11-2200
A12-2200
A13-2200
and so on till A10200.
What is want is to put thick box borders for similar values using a macro. For e.g. i want to put the borders to first 3 cells together as these are of same value 1000, then it has to be put to A7 & A8 (Value - 2000), then for A9 alone, then for A10 to A13 together till i have values in column A.
Here is an excerpt of my code
Code:
Else
Sheet8.Unprotect Password:="rm123abc"
Sheet8.Range("V" & rw) = "Item is not found in the Data Base. Please Contact DME for all documentation requirements for this item"
Sheet8.Protect Password:="rm123abc", AllowFiltering:=True, AllowInsertingRows:=True, AllowDeletingRows:=True
End If
Unfortunately, once the code has run and has finished re-protecting my sheet, it doesn't allow the user to select locked cells. These locked cells contain hyperlinks, and they need to click on these hyperlinks to navigate through my workbook.
So I have two questions:
1. How can I enable allow user to select locked cells
2. Do I have to allow the user to select locked cells to access my hyperlinks, or is there another option?
How would you select cell values from differing rows based on the name in an adjacent column. ie, if it says John, add that data to the source data, if not move on.
View 5 Replies View RelatedI need to take data from a cell that has a space "cherry banana", and make it into two cells "cherry" and "banana". I want to duplicate my line on which the data resides, if possible.
What I have is a sheet like this:
I am trying to Put a border around cells that arent empty. Is this possible?
View 11 Replies View Related