VBA Copy / Paste Specific Cells From A Sheet To Another Based On Condition (reference)
Nov 7, 2012
Basically, I need to copy and paste upon certain condition (references) and paste related-datas in another sheet corresponding with these references. Every references are organized by lines with indicators on columns.
In attached file, see:
- worksheet ANALYSIS:
* datas in E2, G2, D18, D19, D20, D21, D22 that needs to be copy based on reference in C2,
* then need to find this reference in worksheet called GROUP SAVE,
* and based on this reference, paste above cells value in corresponding "Indicators" column number
THEN, I will have to do pretty much the same with subgroup data. But I can figure out for this second step that request same manipulation.
View 3 Replies
ADVERTISEMENT
Mar 13, 2014
I create a macro to copy cells for data starting from A4 to N4 from sheet - Register to 'Case History' when the cells in column N are 'Yes'. Also, would like to copy specific range from A-N and not the entire row. Please refer to the attachment.
Tracker Dept..xlsx
View 2 Replies
View Related
May 20, 2008
I've searched for a solution on the board and the internet too but to no avail; I am trying to create a macro that will select the entire column based on a cell reference G1 which is infact a Date.
Column G to Column S are pre-defined with a specific Date in row 8. If the Date in one of these columns (G8 to S8) match with the Date in cell G1, say it finds a match with H8, then I want to copy the range F14:F2000 and paste as values in range H14:H2000. The possibility of a match found is limited to a single columns from G to S.
View 9 Replies
View Related
Mar 5, 2009
i want to copy a row from one sheet and paste it in another sheet based on a condition.
View 5 Replies
View Related
May 28, 2013
Essentially I need to copy the first 8 cells in a row in one sheet (for example: A3:I3) when the word "Actuals" is entered into A3 from a drop down list. Then the copied data needs to be pasted to a another existing worksheet in the same workbook in the next available row. The data includes mostly values, but there is a formula in column H that creates a hyperlink out of the content in column G, friendly name in column I.
I am not stuck on the idea of having "Actuals" entered in column A as the trigger or change event and there will be times when a new copy/paste of the same data will need to be done more than once at a later date.
For further information, column B contains a serial number/productID number.
View 9 Replies
View Related
Oct 21, 2009
On sheet "CoA" i have at table of periodic payments that is created via an input form and what I want to do is have accounting entries automatically generated in my cask book based on dates.
The code for the input form is as follows;
View 14 Replies
View Related
Nov 7, 2011
[URL]
I have run into a problem which is quite unique. I have data for 40000 football matches. The Sheet "Raw data" has the raw format of the data.
Sheet "Goal Difference (Home - Away)" is pretty important. This sheet is the goal difference between the home team and the away team. "A5:A95" has the number of minutes in a football match and we are trying to track the way a team progresses throughout the match. Lets assume the score is 0-2 for the 1st match and the goals were scored in "39, 76," minute by the away team. So the data will read 0 from 0-38, -1 from 39-75 and -2 from 76-90.
Sheet "Red Cards conceeded_Home" tracks the number of red cards as the match progresses through 0-90 minutes for the home team. The catch here is if the score reads Red Cards : "1 - 2" and the Red Cards Time reads "26, 15, 18". The red card was issued to the home team at 26th minute, The away team received it at the 15th and 18th minute. So the data will read 0 from 0-25, 1 from 26-90.
The same applies to the other tabs.
View 1 Replies
View Related
Apr 19, 2013
I have tried to write some VBA to copy and paste rows based on the condition in cells A:A in sheet one. So far I have managed to put something together which will paste the first row and insert a new row below but keeps on pasting the same row. But not much else! Not sure I have tried to make it more difficult than what is it.
I would like it to copy a row based on a certain condition ("WRW") in A:A sheet one and paste it to sheet2.
VB:
Function DoOne(RowIndex As Integer) As Boolean
Dim Key
Dim Target
[Code].....
View 3 Replies
View Related
Jan 25, 2010
I would like a code which looks on the worksheet “Racks” and if Column A is "Y" then copy the entire row and paste it on the to sheet “Summary Racks”. I would need it to then find the next instance and then continue to copy and paste. I have attached the file I am currently working on.
View 4 Replies
View Related
Sep 17, 2013
I need to copy the row data from sheet1, if the DEPT is HR and paste the same into sheet 2.
Qus:
data table ( Sheet 1)
SLEMP IDDOJ DEPT
1123419/17/2010HR
2123429/17/2010HR[code]......
View 1 Replies
View Related
Mar 31, 2008
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies
View Related
Jan 20, 2009
I would appreciate if someone can help me figure out a macro that will copy range (A3:T112) from "Step 1" sheet to next available row in "Step 2" sheet.
View 8 Replies
View Related
Jul 8, 2009
i have a button that copies data from cell
A5:K5, and pastes it in Sheet2 of my workbook.
The data is ordered like this
------
------
------ button1
------
------
------ button2
------
------
------ buttonX
I have like 40 buttons attached to 4 rows each. And in that group of rows, i have some cells with an IF= formula, and some minor coding.
The problem is: If i press button 3,4,17,29 before i press every other button before that. I get an reference code fail at the cell.
If i press the buttons in order. Like 1,2,3,4,5,6,7 - it appears smoothly.
More info: The button copies data from for example A5:K5 and pastes it into the next blank row of sheet2. But i want to be able to press button 2 before i press button1, without getting an error in my =IF cell.
If i press the 40 buttons in a row, and then starts to mix up the button pressing. It appears smoothly.
View 9 Replies
View Related
Sep 27, 2009
Yeah it is 1:33 am where I am.
I'd like to filter a column and paste only 2 columns to another sheet in the first available row.
I found a code that was posted by Tom Ogilvy and made a few adjustments: ....
View 14 Replies
View Related
Nov 15, 2006
I have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Sub Copy_To_Another_Sheet_1()
Dim FirstAddress As String
Dim myArr As Variant
Dim Rng As Range
Dim Rcount As Long
Dim i As Long
View 9 Replies
View Related
Jul 22, 2007
I enter a part number in "D1". The number of components required for that part number is returned in "G1" based on a VLookup. I would like a macro that will copy and paste the part number I enter in "D1" in the first empty cell in column "D" and will paste it once for each component (G1) required. For example, if the number of components required is 4, and the first empty cell in column "D" is "D10", I would like to paste the part number in cells "D10", "D11", "D12", and "D13".
View 2 Replies
View Related
Mar 24, 2009
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
View 3 Replies
View Related
Apr 14, 2014
I need to copy and paste the specific dates from the specific city that the user will insert in the "dash" sheet.
Basically, I need the macro to read the city and range of dates that the user will type into the "dash" sheet and copy the columns "AA" to "AD" from rows specified by the dates input. Once it has been copied, it has to be special pasted just the value onto the sheet "1" beginning at location B2.
the the data will not be available as it is vlookups to another excel sheet that i have not provided. I have deleted the data, but you can pretty much put 1's everywhere.
View 11 Replies
View Related
Dec 27, 2013
I have dates in Column I (for the whole year) and i would like to paste them into specific cells in three different Columns A,B,C (ie A2, A5, A8, A11 etc) Same Numbers different letter for each respective column. I can get it to go from one cell to another but when i try to specify specific cells
This is what i have so far:
Sub Test()
Range("I1").Select
Selection.Copy
Range("A2").Select
ActiveSheet.Paste
End Sub
View 4 Replies
View Related
Nov 20, 2012
Wanted to know if there is a macro that can copy the selection of cells and paste it as a formula with original cell refernce.
For Example :
Copy Selection Cells - Say Cells A1 B1 & C1
and Paste It as formula In Cell D1 as =A1+B1+C1
View 7 Replies
View Related
Sep 8, 2009
I have about 10 rows of data that have columns of information describing computer hardware and pricing. There are 10 rows, because each row represents a different country and different tax rates and pricing changes per country. So each column of a row has a specific formula to calculate information for that row's country information. All these 10 rows of formulas are kept as a reference at the bottom of the sheet.
At the top of the sheet I need to have a drop down menu to choose a country and then it will automatically copy and paste the row of that country to the current row at the top.
Is there any easy copy/paste macro for such a thing?
View 9 Replies
View Related
Apr 30, 2006
Is there a way to copy then paste specific cells from closed .xls files in one directory ( more than 500 files ), and how, if all files are with one known password protection( my own files ).
View 9 Replies
View Related
Jan 22, 2007
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
View 9 Replies
View Related
Dec 7, 2011
I have a spreadsheet and I was wondering if there is a way to copy from a specific range in say A1:A5 in Sheet1 and paste into Sheet2 where the column matches cell A1 in Sheet1.
I am trying to do this in VBA and I was wondering if there is a way to do this.
View 9 Replies
View Related
May 25, 2014
I have around 200 excel spreadsheets/workbooks with identical ranges but each with different data. There is a total of 5 columns and 225 rows in each spreadsheet/workbook. Looks something like this:
Workbook 1:
Title 1
Title 2
Title 3
Title 4
Title 5
A2
B2
C2
D2
E2
[Code] ....
The Cells I need to copy are in BOLD. I am trying to paste them onto another workbook as follows
Main Workbook:
Workbook #
File 2
File 3
File 4
A2
Title 5
A3
Title 5
[Code] ....
As you can see, each workbook has identical A2 and Title 5 columns, so they only need to be copied once onto the Main workbook where data from the B and E columns are different for each Workbook. So not only I need to copy and paste from a Workbook onto the Main Workbook, but the code has be able to paste it onto a new row in the Main Workbook (where each row in the Main Workbook will correspond to the data copied from Workbooks 1-200.
I am new to VBA but I tried a code where I would copy and paste one cell at a time onto the same workbook and not onto the Main Workbook, and then how to copy and paste from one workbook to another, but as you can imagine that would take a long time:
VB:
Sub dAmacro()
Sheets("Workbook1").Select
Range("G1") = "Workbook #"
Range("H1") = "File 2"
Range("I1") = "File 3"
[Code] .....
It seems like I need some kind of loop, where it would copy and paste a set of cells and repeat the entire process until it reaches the end of the Workbook 1 while making sure when doing same thing for workbook 2, that the data pastes onto a new row onto the Main Workbook. I feel I have the logic down, but its in the syntax where I am failing.
View 9 Replies
View Related
Jul 6, 2014
I will have 2 columns. In column B, will be a list of invoice numbers. Now each one starts with the "job number" (Ex. 51APGC01) then a dash and unique number per invoice. (Ex. 51APGC01-01)
In column A, will be a list of Purchase Order numbers sent by the customer so we can bill. Now, sometimes we get one PO for multiple invoices, (Ex. 03, 05, 06, 07.....)
What I am looking to do, is when I get these PO's, I enter them in and then I print a report for our billing Dept. The way the output line (cell) will read, is Job Number, then each unique number: (51APGC01-03, 05, 06, 07)
There are multiple jobs and each one has it's own report, so the job number will be dynamic and defined else where in the workbook. I can define that. It's just getting the numbers after the "-" and putting them in only.
View 5 Replies
View Related
Feb 13, 2008
I need the macro that looks in to say Column H sheet1, if value ="true" then copy cells in column A, B, D, F to Sheet2.
View 2 Replies
View Related
Apr 17, 2008
"copy cell range based on conditions" and it didnt really get an answer. There was one that copied the info the next blank cell on that line, but im not smart enough yet to figure out how to copy it over. ( getting there though with lots of staring at code).
2 sheets. I have already created auto modules to fill in data and code,and sorted the columns so they are in line.
Sheet 1. Info : has 9 columns. So if column = 9 and the value = new.
Then i want to copy the range on the columns (A:G) and then paste it on the other sheet ( Card info) as long as Column A is empty ( as in next available blank cell) ( something like a DO while worksheet("Card info").column(A) <> ""
View 9 Replies
View Related
Mar 25, 2009
I have attached the file with this post.
What I like a macro to do is:
Whenever a 'D' ends in column "Step 5" the last value of 4 cells to the left to be put in sheet 2 in reverse order.
View 5 Replies
View Related
Feb 4, 2010
I am self-taught (arguably by a pretty shoddy teacher), and am determined to figure *some* of this stuff out. I need a code to look at the rows on one worksheet and based on the value of column A for each row, copy cells A through E in that row to cells A through E of a blank row on a corresponding worksheet. I found a code from another post that does just what I need it to with one small exception. The code was posted by DaveGuggs and is as follows:
View 2 Replies
View Related
