Select The Lowest Of Three Values In Cells
I want to select the lowest of three values in cells I21, I22 & I23. Another condition is that the formula should not select the lowest if it happens to be a zero. If i have 0, 100 & 200 I need the formula to select the 100 value.
View Complete Thread with Replies
Related Forum Messages:
Select Second Lowest
I have a long list with names of banks. I also have three different numbers (between 1 and 10) for every bank. Eg Bank A 5 7 4, Bank B 5 9 3. Sometimes there are not three numbers for a bank but only one or two. There are never more than three numbers though. I want to have a forth column. This column shall give me a new number based on the other numbers. The sorting shall work like this. If a bank only has one number then that number shall be presented in the forth coulmn. If there are two numbers then the lowest one shall be used. If there are three numbers then the two highest numbers shall be chosen and if they are different the lowest one of the two highest shall be presented in the forth coumn. I do not know if you can do this using normal worksheet function of if a user defined function is necessary.
Select Cell With Lowest Value
I have a range of cells and columns with diferent numbers in the range. I would like to know what VBA code I need to write in order to select the cell with the lowest valued number in the range. Cells do not have unique values (if the MIN value is 4, there maybe 5 or 6 cells with this value) I only need to select one of them, and it doesnt matter which. If anyone could suggest how to then select the next smallest number that would also be great (if MIN is 4, to select the next smallest cell, say cell value 6).
Find The Lowest Values ...
i have in the range (Ag1:an1)the names of the months from january- august)in the range (Ag2:An55) ihave numbers in every cell now in every row for example Ag2:An2 i want to find the values less than 50 then i want to write thier month's names in the cells from Ap2:Aw2 i want to do this with every row from row 2 to 55
Display Lowest To Highest In List Where Values Are Duplicated
I am currently trying to display a number from a column of data, where the number is the smallest, then the second smallest (third, fourth and fifth where applicable). When using =small, I am able to display the second smallest number, but when the list contains duplicates, the second smallest figure often matches the smallest. I am having the same problem with =large. I have tried to combat this by using an IF statement, but am only able to place so many arguments into the formula before excel is unable to perform the formula. This is also proving quite lengthy :o(
Lowest Of 3 Different Cells
I am trying to create a formula that will show the lowest of three separate cells. I don't know how to do the Vb script,
This is what I need:
Cell H34 HOURLY RATE (=$920)
Cell I34 DAILY RATE (=$980)
Cell J34 MONTHLY RATE (=$1020)
Cell K34 displays the text "HOURLY" since it's the lowest of those 3 options
Copy Rows Where Column Of Numbers In Between Highest & Lowest Values
I have imported and filtered a .csv. to specified sheet names. I have rows that have been sorted by a specific column's cell contents. i.e.
A B C C E F G H I
xxx xxxx xxx xxx xxx 1 xxxx xxx xxx
xxx xxxx xxx xxx xxx 1 xxxx xxx xxx
xxx xxxx xxx xxx xxx 2 xxxx xxx xxx
xxx xxxx xxx xxx xxx 2 xxxx xxx xxx
xxx xxxx xxx xxx xxx 2 xxxx xxx xxx
I need to be able to select all the rows or ranges that contain a common value 1's and then loop back and select the next group 2's of rows until the row or column contains "".
Found In A Range, And Then Sort Their Corresponding Price Values From Highest To Lowest In Columns A And B
I'd like to have a list printed of all the "qualifying people" found in a range, and then sort their corresponding price values from highest to lowest in Columns A and B. EXAMPLE:
RANGE: D3:D20 - Numerical
RANGE: E3:E20 - Text (names)
RANGE: F3:F20 - $$$
I'd like to search column D for any values of 2 or higher. When it finds a 2 or higher, I want it to find the corresponding name in the SAME ROW in column E, and of course the corresponding price in the SAME ROW in column F. Then I would like only those qualifying people "with value of 2 or higher" to be listed in order from highest price to lowest price in Column A, and B.
Lowest/Highest Number Cells
I have a data listed from A1 to G1. What I want to do is
Check out all the numbers written in those cells, take the highest number among and write to the following cell (lets say A3)
Check out all the numbers written in those cells, take the lowest number among and write to the following cell (lets say A4)
2007- Loop Through Cells, Paste In Lowest Blank One
Need to create a simple loop, I have 50 cells (need to paste in lowest cell) - I need this to occur:
-Is cell A1 empty? if yes - paste
-some other stuff happens...
-Is cell A1 empty? no, is cell A2 empty? - paste
-some other stuff happens...
-Is cell A1 empty? no, is cell A2 empty?, no, is call A3 empty? -paste
Sumproduct - Select All Values Per Wildcard
Sumproduct formula with selection criteria of "A", "B"... in the first column and numeric values in the next colum. The selection is controled by a List where the user can choose "A", "B", ... ,or "ALL". What wildcard-type (pseudo) is needed to select all values when "ALL" is chosen?
I'm using Sumproduct because there is other selection criteria, but it should not impact this part of the formula.
Example: Sumproduct((A1:A100=X1)*(B1:B100)) , where A=selection aray, B=numeric value, X1=corresponding list selection to A
Multi Select Values To Filter
The data is has the following structure:
ID no | Name | Group | Organisation | ...A load of data metrics...
Currently I'm using a standard combobox to select which row of data to analyse - this is based on the concatenation of the persons name, their group and their organisation. What I would like to do is to:
1. Be able to select more than one person
2. Be able to select all/some people from the same Group and Organisation and get their data - e.g. filter the data so that only data for one group is shown and then be able to select one or more names from that group to analyse the data for
Using Drop Down Boxes And Not Being Able To Select Previous Values
I am wanting to configure approx 100 drop down boxes to all point to the same range of data, approx 40 names, but once the name has been selected, none of the other drop down boxes will be able to select that name.
select Dave in drop down box in cell B5. Next cell, B7, I want a drop down box without Dave in it.
If i then change my mind, and select Steve in cell B5, it will automatically adjust cell B7 to allow Dave as he is now no longer selected in cell B5.
Userform Vlookup With The Ability To Save Or Select Values
I have very limited VBA skills and I have tried to get a vlookup working on a userform. I need data from a range selected in ComboBox1 to drop into Textbox1. I have tried but it doesn't work.
I also need if possible a button that pushes the result of TextBox1 to a cell and another button that allows the user to edit the TextBox1 value in situ.
Macro To Select Dates Based On Cell Values
I might be using something completely wrong here, but can anyone tell me if this code is possible or am I being very naive.
H4 and I4 are cells in which I want to enter dates, and then I want these dates to be used in a custom filter on another page.
Below is what my limited understanding of VB came up with.
Dim First As Date
Dim Last As Date
First = Range("H4").Value
Last = Range("I4").Value
Selection.AutoFilter Field:=1, Criteria1:=">=First", Operator:=xlAnd _
Custom Filter To Select A Value And Values Divisible By That Number.
As I have not tried to do this yet this is a hypothetical scenario. Imagine that a column, when filtered, gives cell values such as 3,6,9,12,18,24,36 ..and so on. Is there a way to select, say 12, and then see all the other values that are divisible into 12. e.g. all rows that have 3,6,12. Another example- select 36 and see 3,6,9,12,18 and 36?
On the attached example sheet, column 'O' will be filtered.
accessing certain objects when you use other objects like Sheets?
I was writing some code to select all cells in the sheet:
While this worked in the 'This Workbook' segment of vba, this didn't work in the 'Sheet1' section of the code. I get a 'Range' error.
Select Cells By Value
this is selecting a range of cells which are Blank. How do I select the range of cells by certain value as an option (example, cells that only have zero, not 10, 20, that only have 99, etc)? I couldnt find similar answers in internet and seemingly in this forum.
Select * From Cells
I would like to make a select statement based on cells.
Goal is to recalculate each time the values of some comboboxes: for example when I choose Company A, I know that it has only departments 1 and 2.
Vba Select Only Cells With Value
With the code below I select all the cells (with a value) in the column G.
But this selection also includes blank cells with a formula.
Is it possible to select only the cells with a real (visible) value
Select Non-adjacent Cells
I've always been able to select non-adjacent cells in spreadsheets, but today noticed that I can't. I need to be able to do so to collect data from one spreadsheet to another for my monthly accounting reports. It makes collection of specific data fast and simple. Without this function, it takes far longer to do reporting and is very un-reliable. With the function working, I click on the cell ranges which are black, leaving the cell ranges which are red alone. We use black and red to identify charges which appear or do not yet appear on our monthly VISA statement.
I select all the black charges along with their corresponding account codes, then double-check the page before copying the non-adjacent ranges to make certain that all of the charge amounts and account numbers which are black on the page are selected and no red ones; then copy and paste the data into another sheet. It often makes collection very quick and easy.
When there are lines interspersed throughout a sheet with black and red charges strewn here and there, it is very easy to select only the black data and skip the red. Doing so by copying the entire range then deleting the red is laborious, and time-consuming.
What has happened to Excel's ability to select non-adjacent cells? Today, I can't select even two separate cells, using Excel's ability to do so by holding down the CTRL key, as I have in the past.
I'm using Excel 2007, on Windows Vista 64 bit; and I've made sure that my Insert function is turned off (thought that might change things?) and my Scroll Lock is turned off (I've bumped that many times in the past and found Excel doing weird things when trying to navigate a spreadsheet with the arrow keys).
Auto Select Cells
I Have a sheet with many ranges, when i push the commandbutton I need it to insert the selected cell in textbox 1 witch works but it needs to insert the full range into textbox 2, 3, 4, 5, 6. I have attached an example.
Select Cells Equal To Zero
How can I select all rows where certain cells are equal to zero?
(i.e. in Column A
I want to select rows 4, 5 & 6.
I've used Go To>Special:Errors to write a macro to hide all rows with errors, but I also want to hide all rows that have zero values
Select Last X Used Cells In Column
I would like to select the last few cells in a column, however the number of rows is not fixed, it changes. This can only select the fifth last cell:
Sheets("ABC").Range( 'A1:A150').End(xlDown).Offset(-5, 0).Select
Ultimately, i want to select the 5 cells from the fifth last to the last:
from this: Sheets("ABC").Range( 'A1:A150').End(xlDown).Offset(-5, 0).Select
to this: Sheets("ABC").Range( 'A1:A150').End(xlDown).Offset(0, 0).Select
If possible, with the cells selected, can i do something similar to this:
Selection.AutoFill Destination:=Range("B62:B114"), Type:=xlFillDefault
The underlined parts is the part which make me headache. How do i solve this?
Select Random Cells In The Selection
I'm trying to select an x number of random selections within the selection.
Basically, lets say A1:A100 is selected, im going to have a inputbox asking how many to select, you put 10 in the inputbox, and then it randomly chooses 10 from A1:A100 and highlights them
This seems easy enough, i can do the input box and know the random function. just not sure how to set the beginning point and the ending point with Cell locations and then have it highlight those selections... a for loop I'm guessing?
Select A Range Of Non-adjacent Cells
I have a series of data values in non-adjacent columns in an excel spreadsheet.
In the following example, assume the | (vertical bar) refers to the start of
a new cell:
Using the SUMIF formula, I want to add all numbers which are preceded by a
cell containing the letter F.
What I need to do is specify a range of every second cell in the row (starting with Cell A1) for validating they equal F, and a range of the alternating cells (starting in column B1) for the range containing the data to add. How can I specify these ranges (I can't name each cell individually as I have more than 30 cells to add up in my real life situation and the IF function allows selection of no more than 30 values)?
Automatically Select Next Group Of Cells
I have a workbook that contains part numbers and their components listed like below. There is always one empty row between the part number and the components, and then 3 empty rows between the last component and the next part number.
The number of components varies from sometimes only 1 up to 25. Currently, I select a part number and its components like B1:C5 and then I have a macro that copies it to another workbook. What I would like to do is somehow get the macro to automatically select the next set down, in this case, B9:C14, so I could copy every set over to its proper place with only one click of the button.
Select A Couple Of Cells In A Row
I would like to write part of the code that select a couple of cells in a row (for example : Range("A1:A10).select) than:
-find a text which is in one of these cells (for example "HP") - and gives me back column in which this text is input
texts in selected cells will always be the same (for example : HP, CH, SD, .... ect.)
Select Locked Cells In 2000
I've created quite a few workbook/worksheets in excel 2007 compatibility mode that are data entry intensive. When protecting these worksheets, you have the option of allowing the user to "select locked cells". I invariably uncheck this option because the user doesn't need to interact with these cells.
However, several of my users are running Excel 2000 and the same option is not available when one protects a worksheet in Excel 2000. Is there a way to do that in VBA for these Excel 2000 users such that when they click on a locked cell, the cursor will not respond to that cell?
Select Defined Cells And Stack
I have 65,000 rows of numerical data in column A. In column B are selected values from A. I need to put values from non empty cells in column B to C and "stack" them in a contiguous column with no empty cells. (Please see attached).
Multiple Select Cells With Formula Only
Is it possible to select cells with conditions below using formula only?
Yes, VBA is easier, but I want to know if this is possible using formula.
1. selected cells (requested): A1, A3, A6, A10, A15 .... total 20 cells.
2. the increasement between them are: 2, 3, 4, 5, 6, 7, 8 ,,,,
Select All Unlocked Cells On Sheet
I am trying to select all unlock cells in the active sheet. However, my method checks through each cell in the sheet and it takes too long.
Dim rng As Range
If IsNull(Cells.Locked) Then
'if null then there is unlocked cells
For Each c In cells
If c.Locked = False Then
If rng Is Nothing Then
Set rng = c
Set rng = Union(rng, c)
If rng Is Nothing Then Exit Sub