# Rank The 5 Lowest Values

May 6, 2009In a range of 27000 records I dlike to find the lowest 5 values excluding, div0, N/A and other error things like that

View 9 RepliesIn a range of 27000 records I dlike to find the lowest 5 values excluding, div0, N/A and other error things like that

View 9 RepliesADVERTISEMENT

I am trying to configure a formula using RANK to do the following:

- Sort scores from highest to lowest (range from 1 to 900)

There will be 64 entries total (64 man bracket) and i would like to rank them from highest score (900 is highest score) to lowest score (1 is lowest score).

This is for a bowling bracket. The names of the bowlers will be in column A. The scores will be in column B. Their RANK will be in column C.

I have a data that needs to be ranked from highest to lowest. I used the Rank function to do this.After getting the rank, i need to consolidate the data by highest to lowest rank, while simultaneously getting the values of the column on the same row.

I used the index and the match function. And i was able to do that, but the problem is there are items that have the same rank. how do i consolidate the data from highest to lowest even if with same ranks?

What I am trying to do is give the rank in column D based on the values in columns B and C. Some of the values in column B will have then same rank, and as such I want to add further criteria on which to rank them. I would first like to rank the values in column B and then rank the values in column C, which should give the rank in column D. For example Dog and Frog have the same value of 400 from the Non UK column. Therefore, rather than having these as both rank 1, I want them to be ranks 1 and 2, so want to add another criteria (UK). As Dog is greater than Frog in the UK (i.e. 10>7), I would like to rank Dog as 1 and Frog as 2. Goat will be ranked as 3 because it had the thrid highest value in the Non UK.

ABCD

1Non UKUKRank

2Cat20055

3Dog400101

4Eel200114

5Frog40072

6Goat30023

i have in the range (Ag1:an1)the names of the months from january- august)in the range (Ag2:An55) ihave numbers in every cell now in every row for example Ag2:An2 i want to find the values less than 50 then i want to write thier month's names in the cells from Ap2:Aw2 i want to do this with every row from row 2 to 55

View 9 Replies View RelatedI want to select the lowest of three values in cells I21, I22 & I23. Another condition is that the formula should not select the lowest if it happens to be a zero. If i have 0, 100 & 200 I need the formula to select the 100 value.

View 5 Replies View RelatedI'm using the code described down below to highlight 5 of the lowest values in a column. The problem; If at a certain moment the column contains less then 5 values the code errors, so I've to put in a lot of error handlers to fix the problem.

View 4 Replies View Relatedwhat I need for excel to automatically remove the highest and lowest TOTAL POINTS and create an average "Speed Rating" of the remaining 3 scores.

Is it possible to get Excel to do this?

Have column A which is list of names and column E which shows how much each name owes. I want to compile a list of names and amounts owed for the 15 biggest debts (ie. 15 lowest numbers as they are negative values).

View 2 Replies View RelatedI need a formula that will pull specified information from sheet2 (without having to sort) into sheet 1 by looking up the specified name. See attachd file.

View 3 Replies View RelatedI have 4 grids on the trending tab. I want to find the top 10 highest Color assets from Fleet Volume -Color tab under the correct month.

So for example, if the month is May as in cell G3 on the trending tab, then look at the data under the month of May on the Fleet Volume-Color tab and find the top 10 assets and drop in the City, Address, Model, Serial Number and then volume to the 1st grid on the trending tab, then repeat for Highest B&W

I want to the do the same for each of the other 3 grids on this tab. I want this to update based on the month on both tabs.

Of course, the data on the Fleet Volume tabs is a small range due to size, the data is a lot larger.

Is there are way to do this with a formula? I tried Large and small formula but not too sure how to bring over the other data like City, Model etc.

I have an excel with column value as below(sample)

3

4

6

7

empty cell

4

5

3

1

7

empty cell

4

5

empty cell

and more...

Actually i want it to reduce others with lowest number among them.. and after every empty cell, it should find the lowest number again and reduce it from others.. this should repeat until the column data completes. after processing it should find as below

0

1

3

4

empty cell

3

4

2

0

6

empty cell

0

1

empty cell

Any macro or excel formula for processing such a kind of excel. Empty cell works like a delimiter..

I have 10 sales figures in C2:C11.

In D2:D11, I want the rank of those values, with one twist.

If the value in B2:B11 is X, then that value is excluded from the ranking.

I am trying to basically do:

=RANK(C2,IF(B2:B11="X",0,C2:C11))

Which formula can I use to rank the people below.

Consider that the lower the value on attendance and cancellations is, the better this number will be.

In the other cells the highest the value, the better the number is.

NameAttendanceUtilizationProductivityQualityCancellationsCharles089.38%26.60NA0Nick587.69%56.921001Brian384.51%51.32800Joe080.71%36.151000

I've used the below formula to fill column D with the name of the cheapest supplier for the parts listed in each row.

=INDEX($G$1:$M$1,MATCH(MIN(G3:M3),$G3:$M3,0))

Is there a way to fill columns E & F with the 2nd & 3rd cheapest suppliers?

My table is shown below:

Capture.PNG

I have data in a worksheet coming from an external device that is updated via DDE. The values in the cell change every few seconds. I would like to record the highest and lowest values that these cells contain.

I want the peak values to be stored in other cells.

I need the close% column to auto sort from highest to lowest so that I can see at a glance who the top sales person is. I have conditional formatting for the top three but I would rather them auto sort by close%, can anybody help me with this. I have attached the file,

View 9 Replies View RelatedI have a column that updates automatically by placing a value in in the next blank cell in the column. I am trying to write two formulas to identify the highest and lowest values in the preceding 10 cells of each update in the column but seem to be stuck in MIN/MAX/OFFSET hell.

View 8 Replies View RelatedI am currently trying to display a number from a column of data, where the number is the smallest, then the second smallest (third, fourth and fifth where applicable). When using =small, I am able to display the second smallest number, but when the list contains duplicates, the second smallest figure often matches the smallest. I am having the same problem with =large. I have tried to combat this by using an IF statement, but am only able to place so many arguments into the formula before excel is unable to perform the formula. This is also proving quite lengthy :o(

View 4 Replies View RelatedUsing formula, how do I rank

CAM100-24

COM98-21

CAM100-18

CAM27-37

COM121-5

COM98-23

so it first sorts in alphabetical order using the string before the "-" i.e. CAM27 comes before CAM100, and then by the biggest 'secondary values' (the value after the "-") so that COM98-23 comes before COM98-21?

I have a list of values (some are duplicates) which I need to rank.

The problem arises where I have more than one of any rank, the next rank skips a number. I need to have a list of sequential numbers and therefore can't have any numbers missing.

Example:

Value Rank Desired Rank

120 1 1

125 2 2

130 3 3

130 3 3

142 5 4

Got a question about RANK. As you can see from the example below, I want the rank of 1 to be 6, not 7 - same values keep the same rank but the next value takes the next rank number.

Is there a way to achieve this - I need to rank around 4000 lines...

Anyone know of a function that will return a rank of cell C3, in range C3:C800 that does contain a few #N/A values?

View 9 Replies View Relatedam currently setting up a fantasy football league.

i have set up the league, with team name overall points and position, my problem is that when 2 teams have the same points one team is omitted and the other team has its name on both entries

the formula's i am using are

vlookup = to find the name of team for the points

large = to find out points of each team

I have two sheets of data and would like to rank according to the order in which the data fit on both sheets. Rank function only seems to allow one sheet at a time.

View 9 Replies View RelatedTrying to arrange numerical values in order from lowest to highest in a column i have a code to do that but i need it to be able to but to a range in the column so it only sorts the values in rows 3 - 60 not all of the rows in the column

Sub Testsort()

Range("A3").CurrentRegion.Select

Selection.Sort Key1:=Range("A3"), Order1:=xlAscending, Header:=xlGuess, _

OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _

DataOption1:=xlSortNormal

End Sub

I have imported and filtered a .csv. to specified sheet names. I have rows that have been sorted by a specific column's cell contents. i.e.

A B C C E F G H I

xxx xxxx xxx xxx xxx 1 xxxx xxx xxx

xxx xxxx xxx xxx xxx 1 xxxx xxx xxx

xxx xxxx xxx xxx xxx 2 xxxx xxx xxx

xxx xxxx xxx xxx xxx 2 xxxx xxx xxx

xxx xxxx xxx xxx xxx 2 xxxx xxx xxx

I need to be able to select all the rows or ranges that contain a common value 1's and then loop back and select the next group 2's of rows until the row or column contains "".

Attached is an excel file that contains all possible values in the first column (9238 of them) and a comma separated list of a subset of those values in the second column. I need to find a way to replace the smallest value with 1, the next smallest value with 2, ... , and the largest value with 9238 in every instance. In other words, I need their rank value.

OhioBlockGroup.xlsm

I'm using a Large function embedded in a Match function to a ranking.

The issue I'm having is that if there are 2 of the same values in the Top 5, it counts the first one twice rather than each one once.

I'm trying to rank the values in row 94 while ignoring only zero values and including positive and negative values. I'd like the function to rank the values in descending order, beginning with the most positive value and ending with the most negative value while ignoring all zeros. The function I've come up with so far ranks the positive values correctly and ignores the zeros, but the negative values are ranked as if they come after all of the zero values instead of being ranked immediately after the smallest positive value. Is there a way to fix the function below to make it do what I want?

=IF(D94=0,"",RANK(D94,$D$94:$AY$94,0))

Copyrights 2005-15 www.BigResource.com, All rights reserved