I'm trying to set a range to use in a Lookup function but it's not working. I've done this other times with no trouble and I don't see why it's not working now.
If Target.Row > 2 And Target.Count > 1 Then
For Each c In selection
If c.Column = 11 Then
' confirm that Activity ID is in the Reference file list
Set Lookup_Vector1 = Worksheets(c.Worksheet.Name).Range("Activity_ID")
Error occurs on the Set Lookup_Vector1 line, Run-time error '1004': Application-defined or object-defined error.
The range Activity_ID is defined in the current worksheet but exists in another workbook. The c.Worksheet.Name correctly gives the name of the worksheet where the range is defined.
I am trying to use the INDIRECT function to look up values on a range of other worksheets. I have a column of data in col A which is essentially a lot of different worksheet names. On each worksheet I need to use VLOOKUP to find a value.
Easier to show formulas. This is an example of what I want to recreate:
=VLOOKUP(O2, test!B3:C13,2,FALSE)
I want to replace the text "test" with the text in column A. So the first INDIRECT formula looks like this:
=INDIRECT("VLOOKUP(O2, " &A1& "!B3:C13,2,FALSE)")
Which to me looks like it should work but I get a #REF! error. I've tried various permutations, e.g. having the INDIRECT part of the formula located in a different place (next to the "test" text) but run in to similar issues.
I am performing a lookup using the populare user defined function nlookup, which does not take a lookuparray argument to find lookup values. But I only want to return lookup values that fall into a certain array. To accomplish this, I figured out that I need a way to specify a condition of the type "if cell address of lookup value falls within range"
It should be possible if I find a way to return the cell address of the nlookup value, but as nlookup is not limited by a lookuparray argument, so I was not able to use the address/index/match that come up in similar questions.
I have a workbook with 2 different types of sheet - 1 containing source data and the others 'collecting' data from the source sheet, depending on what the sheet is for.
For example, the data source contains different pets, their names, ages and their owners.
The other sheets are on a one-per-owner basis.
What I would like to do is use a LOOKUP / MATCH function to lookup the owner name typed in cell A1 of the output sheet and match it with the corresponding owner name(s) on the source sheet. I would then like it to return with each pet and append the results on the sheet accordingly - like below:
John Smith (in cell A1)
Pet - Name - Age ------------------- Dog - Rover - 3 Goldfish - Tom - 1 Gerbil - Chewit - 4
I am trying to perform a lookup (vlookup) function in a cell in excel and wish to have the range as a variable, so that I can adjust which column the lookup function refers to.
I am trying to use lookup function to lookup for data in another table (we call it table A). Unfortunately, whenever the code is not in the table A, Excel will return the data from the previous row.... is there any possible way to prevent this... in another word, if the code does not exist in the table A, I want Excel to return 0 or some other figures.
Is it possible to set up a lookup function with two lookup values? For example, say I have a list of items such as:
1 A 14 1 B 22 2 C 84 4 D 25
I'd like to have the lookup go to the above table and find the number 1 and the letter B and return 22. I can't seem to visualize how to make this work.
Can I get all the information from Employee & Benefits tab to populate in the 401K worksheet. All information is on these two sheets except status, plan entry date, and 2009 compensation.
True under Employees tab means that a person is still active and I would like for that date to populate the 'Hire Date' column; whereas, 'False' represents a person is termed and I would like for the false date to populate under termed. Can you use the social security number if its a V Lookup because I have thousands of rows and multiple people with the same last name.
I would like to do is reference a table of data using the Vlookup function but add all of the results together. I have a table where I keep track of orders being distributed, and in an inventory sheet I want it to reference that table based on the serial numbers entered and total the results.
A B C D E 1 DAY 1DAY 2DAY 3DAY 4 2 AAA1638 3 BBB7325 4 CCC3847 5 DDD5562
This is what I have. Now I want to see, for each day which has the highest value. so it should return BBB for day 1, CCC for day 2, DDD for day 3 and AAA for day 1.The formula I am using:
Tell you what, it is giving me correct result for column B,C,D but not for E. The formula for column E should return AAA, but for some reason it is returning DDD.
I just wanted to use lookup function in my code. But I had to re-write my for..next statement 8 times. How can I state it in one single lookup function used in a for..next statement. Here is my code
Sub iteration(r) Dim i As Integer Dim j As Integer Dim x1(4) As Double Dim arra(8, 2) As Double Dim arrb(8, 4) As Double r(1) = Worksheets("sonuc"). Range("j4").Value r(2) = Worksheets("sonuc").Range("j6").Value Dim myRange As Range Set myRange = Worksheets("giderler").Range("b6:b11") x1(1) = Application.WorksheetFunction.Floor(r(1), 0.5) x1(2) = Application.WorksheetFunction.Ceiling(r(1), 0.5) x1(3) = Application.WorksheetFunction.Floor(r(2), 0.5) x1(4) = Application.WorksheetFunction.Ceiling(r(2), 0.5) For i = 1 To 4
I have 2 worksheets, 1 containing a list of 5000 products and 1 containing a list of 3 columns with classifications in them (about 300 classifications). for example worksheet 1 has 5 products
Coke Volvic Mars Bar Cornflakes Bags Maltesers
The 2nd worksheet has 3 columns with the following info Column 1 Column 2 Column3 (Catagory) (sub Cat) (Sub Sub Cat) Minerals Soft Drinks 2lts Minerals Water 1lts Sweets Choc Bars Std Bars Sweets Bagged Lines Std Bags Grocery Breakfast Cereals
I want to be able to add a classification to the products in worksheet 1. For example to be able to choose a dropdown that has a list of each classification and after coke select from the "Catagory) drop down, then select the "Sub Cat" drop down and then select the "SubSub Cat" dropdown.
Product Catagory Sub Catagory SubSub Catagory Coke Minerals Soft Drinks 2lts Mars Sweets Choc Bars Std Bars
As I said I have to do this manually for about 5000 items so I need to be able to do this as fast as I can. Can you use the lookup fuctions or something like that?
how to fix the REF error in this formula. =IF((OR(G3="Hour (Truck)",G3="Hour (Truck + Dog)")),(VLOOKUP(G3,Rates!$A$186:$B$187,2,FALSE)),(IF(F3="Hanson",3.5,(IF(F3="Lakes",10,(IF(F3="NO",(VLOOKUP(E3,TonnesRates,MATCH(B3,Rates!$B$110:$D$110),FALSE))))))))). I have tried to attach the file with the minimal information in it to make it small enough but I can't get it below 48kb.
I have read through other similar topics and tried using the index and match function to lookup but been unable to make the formula work.
I am trying to use the lookup function to pull data from a table using criteria in two columns and one row. I have attached a spreadsheet for example.
I want to use criteria of Day (eg . 1), Total height (cm), and jar # (eg. 1). I inherited this table from a previous coworker and don't have time to organize the data better.
In the spreadsheet I want to return the value of 8.8 (highlighted in yellow). The criteria I want to use to lookup the value are highlighted in red.
I am creating a spreadsheet to keep track of money and grouping them into categories. I have a column to group a purchase into a category (column E) and the amount spent in column F. I want column T to add up all of the purchase that were made according to the category in Column E.
I have store numbers and store volume groups (one letter indicating their sales volume). This is sorted in somewhat of a table - the volume groups are in row 4 going horizontal, the store numbers are under their respective volume groups going vertical.
I have all store numbers listed vertically on another sheet, starting in A2. I want to search for the store number in A2 within the volume group data and return the appropriate group header when it's found.
I tried to write a function so that it would search for a word from Column C in Column B, and then when it found it, give me a a combined result of Column A and B. For instance. I lookup up C1 (Goja Apple) in the range of all of column B; the function finds it in B3 (Goja Apple); then it returns the combined result A3 and B3 (Ca23 Goja Apple). I tried the =lookup, but I think the first column you select must be in ascending order, and that wont work for me.
In my spreadsheet, one cell in every row has a string that contains the invoice number. I would like to get the invoice number in a cell of it's own. The problem is that different vendors use different lengths of characters for their inv #, so I can't do a one size fits all MID formula.
What would be the best way of getting the invoice number?
Look at 6 weeks of data, using "Tue" as the search parameter. I need to find the last 3 tuesdays (from current cell) and then sum the corresponding values in the cell I designate.
I'm fluent with LOOKUP and already have it finding and summing last few Tuesdays and corresponding sales totals, but I need it to only back THREE Tuesdays consistently, not 2 or 4, which it is sometimes doing now??? How do I force it to look back at "tue" and when it has found three times, it knows to stop and not consider any other Tuesdays it may find further back in the data?
i use the formula below in a wb. When it runs its searches col A for what ever is in H36. Is there a way to make it search col A & B for what ever is in H36?
Im just setting up a spreadsheet for structural timber design calculations. One of the requirements for this spreadsheet is to look up a Zx value from a table. Once the Zx value is found it returns a size of timber from another column. I have managed to create the function so that it looks up the Zx value and returns the size. However, if the function cant find the exact Zx value, which will usually be the case. The next lowest Zx value is used. Is there a way i can edit this function so that it returns the next highest Zx value instead of the next lowest. At the moment this is the code i am using.
Where Q92 is the value to be looked up. E5:E172 is the column of values to be searched. C5:C172 is the column of values where the result comes from. In addition to this just to further complicate things, can it return say the next 5 highest values? If a lookup function cant be used could you tell me another way that i can achieve this.
Im trying to do a lookup but when I drag the formula down it returns the wrong values and also returns #N/A or #REF (which I think means it's refering to a wrong range and cant find the data???). How can I do a look up function by dragging the formula down a long column of data eg. 65,000 rows in excel, that returns the correct text. I have attached a simple example- see attached.
In Mr Excel's Pod Cast on April 12th, he showed how to use the OFFSET function to define a range inside a SUM function. Then he had Conditional Formatting that would highlight the range that was being summed. Can anyone tell me what the formula would be inside the Conditional Formatting dialog box to get the OFFSET range to have a certain format?
I need to add a Bloomberg BDP function to my lookup statement. The formula that i'm trying to replicate in VBA is =IF(ISBLANK(h23,"",BDP(H23&" cusip","long_comp_name")). update my macro.
I have been writing a speadsheet using drop down lists and the Lookup function to link names to body weights. When using the dropdown list it displays for one name the incorrect weight. All the rest work correctly but one will not. From the list below when I select the name White it displays '68' rather then '80' as it should. If I change the name of White to the number 4, it will act correctly and display the weight '80'. It seems rather bizare.
Nano Caps are companies with a market value below $50 Million Micro Caps are companies with a market value between $50 Million and $300 Million Small Caps are companies with a market value between $300 Million and $2 Billion Mid Caps are companies with a market value between $2 Billion and $10 Billion Large Caps are companies with a market value between $10 Billion and $200 Billion Mega Caps are companies with a market value above $200 Billion.
I have this part so far that someone helped me out with that belonged with this criteria:
Micro Caps are companies with a market value below $300 Million Small Caps are companies with a market value between $300 Million and $2 Billion Mid Caps are companies with a market value between $2 Billion and $10 Billion Large Caps are companies with a market value above $10 Billion
I came up with this one for the new criteria: =LOOKUP(P2,{0,50000000,300000000,2000000001,10000000001,200000000001},{“Nano”,"Micro","Small","Mid", "Large",”Mega”})
it keeps giving me an error message..... the thing is the criteria that its based off of( market cap) is in millions but this is the function thats in the cell: =K2*T2/1000000
I have data concerning documents people have to write, which is updated weekly. Is there a way of looking up a name and then returning all the documents that they have to write. I have tried a vlookup, but this only returns the first entry and not the lot. Also i would prefer the document data for each person to be returned in to one cell.
