I am trying to use lookup function to lookup for data in another table (we call it table A). Unfortunately, whenever the code is not in the table A, Excel will return the data from the previous row.... is there any possible way to prevent this... in another word, if the code does not exist in the table A, I want Excel to return 0 or some other figures.
View 9 Replies
I am trying to perform a lookup (vlookup) function in a cell in excel and wish to have the range as a variable, so that I can adjust which column the lookup function refers to.
View 4 Replies View RelatedI have a workbook with 2 different types of sheet - 1 containing source data and the others 'collecting' data from the source sheet, depending on what the sheet is for.
For example, the data source contains different pets, their names, ages and their owners.
The other sheets are on a one-per-owner basis.
What I would like to do is use a LOOKUP / MATCH function to lookup the owner name typed in cell A1 of the output sheet and match it with the corresponding owner name(s) on the source sheet. I would then like it to return with each pet and append the results on the sheet accordingly - like below:
John Smith (in cell A1)
Pet - Name - Age
-------------------
Dog - Rover - 3
Goldfish - Tom - 1
Gerbil - Chewit - 4
I simply want to use the indirect function in vlookup formula in cell B2 (sheet11) is the sheet name I want to use for the lookup table.
=vlookup(B1,'[Alan.xls]sheet11'!$A$5:$F$19,4,0)
=vlookup(B1,'[Alan.xls]indirect("&B2&")"'!"$A$5:$F$19,4,0)
But doesn't work.
Is it possible to set up a lookup function with two lookup values? For example, say I have a list of items such as:
1 A 14
1 B 22
2 C 84
4 D 25
I'd like to have the lookup go to the above table and find the number 1 and the letter B and return 22. I can't seem to visualize how to make this work.
I need to place a lookup table in a work book and I'm not sure how to do it.Below is what I specifically need in my workbook.
c. The workbook will need a lookup table that will lookup the tuition, clothing
and entertainment figures depending on the selection of college, and will
ensure that only the colleges on the list are selectable. That is, the
worksheet will not allow the user to enter another college not in the list.
The lookup list must be on a worksheet by itself at the end of the workbook.
I have store numbers and store volume groups (one letter indicating their sales volume). This is sorted in somewhat of a table - the volume groups are in row 4 going horizontal, the store numbers are under their respective volume groups going vertical.
I have all store numbers listed vertically on another sheet, starting in A2. I want to search for the store number in A2 within the volume group data and return the appropriate group header when it's found.
the code for lookup value of point 1 and point2 from the table ,if i key in the no.group and type of grade.
eg.1 Group10 grade a value to be point1=75 point2=20
eg.2 Group16 grade B value to be point1=125 point2=172
I am creating, essentially, a product order form (actually a shopping list creator for my wife). Containing 'Quantity', 'Product Name' and 'Price'. When I enter the product name via a drop-down list, the price is displayed using vlookup.... no problem so far.
My problem is... or should I say, my desire is, that when the vlookup price is displayed, if I (my spouse) know the current price to be different from the one retrieved from the lookup table, I would like to post the new price and modify the data in the lookup table so that any future requests for that item will reflect the new price.
How do I lookup a table , eg. E4:G16 to see if that table contains a data.
I tried {=search(A4,E4:G16)} where A4 is in cell F10 but returns Value error.
I have a spreadsheet that I would look up two criteria in the table array, which first is down the column and next cross the row.
It would be easier to explain the scenarios by referring to the attached file.
I have a pretty large table,(153,000 rows) My lookup_value is a 7 digit number. If my lookup_value isn't in the lookup_vector, it should return "#N/A" (which it does most of the time) but I noticed it was returning a result when the lookup_value didn't exist...it didn't exist anywhere in the table.
View 3 Replies View RelatedI am looking to find the best method of pulling data from a Lookup Table I would like to set up a drop down with all the relevant Steel Sections we make it work and have it access the information and display just that information a separate face page. The information I have set up on the lookup and have named ranges fro them all But how do I get the drop down to trigger the process.
View 3 Replies View Relatedhere is an example....
(this is on a sheet called Summary)
----A--------B --------C------- D
1Names----At Bats----Hits----Batting Average
2Tom-------38--------31------.816
3Derek------19--------14------.737
4Joey-------40--------28------.700
5Chris-------40--------27------.675
6Chuck------37--------24------.649
Using the LARGE function, Excel has created a list based on batting averages(on a separate sheet called Line-up). It looks like this.....
---A----------B
1Names----Averages
2 -----------.737
3 -----------.700
4 -----------.675
5 -----------.816
6 -----------.649
The problem I am having is figuring a way for Excel to also bring the corresponding names (after using the LARGE function to create the line up list).
I have a very large spreadsheet of customer information(I call it the master spreadsheet). Each row contains only 3 things: Account number, product bought, Price
Later I receive the money from the customer for that product(the pay sheet) that contains the exact same thing in the same order: Account number, Product bought, Price paid.
What I'm trying to do is compare the two spreadsheets so that when i receive the pay sheet of cusomters who have paid with the amount it will deduct it from the master sheet.
So it should compare account numbers when it finds a match then it should subtract the amount paid (column C) from the master spreadheet price column(column C also).
sometimes customers don't pay the right price so it has to be a subtraction so I can see if it was over paied, underpaid etc.
Right now I'm still doing it manually combining the two documents sorting it by account number and checking for matches in column A (account number).
I setup this function to pull my staff's schedule an auto generate the forms i need however the lookup function works properly sometimes and improperly others i checked the syntax and it is correct how ever the wrong data is continually returned. I have attached the file if anyone can help. the VISUAL PLAN tab is the one contaning the formula and it pulls data from PLAN, CURENT SCHEDULE, AND CATAGORY SUMMARY however the only formulas hat i have a problem with are the ones referencing CURENT SCHEDULE.
View 9 Replies View RelatedI have spreadsheet that I use to display quarterly metrics. Within the workbook, there are two spreadsheets; (1) output (2) data.
Part 1: I want the ability to view data for any quarter of any year. In columns O-P, I have created a dropdown for the year I want to view and option buttons for the quarter I want to view.
The data is organized in one sheet and includes all information by quarter.
As an example, say I want to display data for District 112 and I want to display data for the 3rd Quarter of 2007. I am trying to create a formula that would look in the table as follows: (1) look for district 112 then (2) look for 2007 then (3) look for 3rd quarter then (4) look for units sold. I tried using a modified lookup function but didn’t have any luck.
Part 2: The second part of my question is similar to the first part but in this case I need to summarize data (cells $B$18:$D:$22).
As an example, say I want to display the total number of sales in the U.S. for the 3rd quarter of 2007. In this example, I would look in the table for the following: (1) look for Division then (2) look for 2007 then (3) look for 3rd quarter then (4) sum all based on criteria.
I have a lookup table which needs to be able to retrieve data from columns as well as rows and not sure if this is possible.
My data is set up with an ID number, financial year and data across the columns e.g
ID F/Y Apples Pears
9999 2004/5 5 4
9999 2005/6 7 8
9881 2003/4 5 3
My lookup table will have the ID number field which will be manually entered to lookup the information on the data sheet. e.g
ID 9999
FY Apples Pears
2004/5 5 4
2005/6 7 8
I can't work out a way to get excel to only give me the number of apples and pears for that year for that ID number. Not all ID numbers will have the same number of financial years so I may need to use VBA.
i am attaching a sheet here.
i have put data validation list in three columns
from data lsts i select unit type , then hinge type then code.... the problem is that as soon as i select code all the values (H W D ) in the next three cells should automatically change.
the values against each cabinet code are also provided in the same sheet.
Sr No.
Unit Type
Unit Type
Code
H
W
D
Qty
1
Base Unit
Double Hinged Door
B60
720
600
580
2
2
Base Unit
Single Hinged Door
B30R
720
300
580
4
I want to compare a hand entered data sheet to my system data. System data is exported in. Then that data is used to populate a pivot table. I use a lookup list that fills in matching data from my hand typed sheet. From there I want to use true/false to see if the data matches. However, the formula will not copy down. I am sure it has to do with the formula holding a value, but I can’t seem to correct it.
Recap
1.System data populates sheet
2.Pivot table pulls info I need.
3.Lookup list cross references hand entered data sheet and puts value next to pivot table.
4.I need to do a true false to see if data matches but can’t get it to work
Example worksheet: On the worksheet you can see that the true false statements are incorrect. The system data and the hand entered data match two times not once.
I have a sheet that has to look up value on a report from a sheet sheet that has more than value. Ex)
On the report I have values 123A and 1234A
On the data tab I have table that has.
Ref Tot Value Desc Value1 Value2 Value3
1 123A Widgets 1 2 3
2 123A Widgets 4 5 6
Ref Tot Value Desc Value1 Value2 Value3
1 123B Nuts 7 8 9
5 123B Nuts 1 3 5
Ref Tot Value Desc Value1 Value2 Value3
7 1234A Bolts 2 4 6
11 1234A Bolts 3 5 8
So the report need find the values for Value 1, 2, 3 on where the value matches the data tab.
I have a RAW DATA work sheet that has data of electricity consumption for a given week but it is in a vrtical table.
I have many other work work sheets in the workbook that I require to look at the RAW data and the return the correct information in the specified cells
I need the store number that is in cell F1 of each sheet and the Date on each sheet that are on Row4 of each sheet to Look up and match the information in ROW1 for the store number and columnA for the dates.
then in columnB of RAW DATA I have time intervals of 30mins which need to match up with the time intervals on the sheets and display the readings from the RAW data on the sheets.
******** ******************** src="http://www.interq.or.jp/sun/puremis/...<CENTER><TABLE cellSpacing=0 cellPadding=0 align=center>Microsoft Excel - Energy Analysis WE15-03-09.xls___Running: 11.0 : OS = (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA2A3A4A5A6A7A8=ABCDEFGHIJKLMNO1Reading DateReading Time8912116617118519682296710191119125612571292209/03/200900:0012.5926.74929.69668.728.6487.526.5616.2312.6416.3818.08317.02719.569309/03/200900:3011.8467.211.49610.1245.8726.821.817.9811.3216.711.96214.65619.243409/03/200901:0010.7368.11211.19811.286.27.415.2330.3412.0416.269.5527.26429.02509/03/200901:3010.78767.612810.68510.40725.6966.814.888.936.8416.618.53448.72645.4432609/03/200902:0011.0727.235213.01310.3235.9288.814.757.875.9218.059.38247.09445.3136709/03/200902:3011.2996.819210.26210.1765.70410.414.758.135.0916.489.0566.88325.1984809/03/200903:0011.8116.18248.952411.3695.88.314.697.774.9916.87.20964.71046.2496RAW DATA [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
have a formula or something along those lines that will look for the data you type in to the selected cell and will show you on how many workbooks it has been entered in. For example, I have workbook a, b, c, d, e, f. all have 12 sheets. On these 12 sheets there is a place to enter the serial number of an item. What I would like to be able to do is on a different workbook be able to type in a serial number and have it show which workbooks it has ever been typed in and its location on said workbooks. and if possible the results of the item which would be whether it was accepted or rejected( this bit is not totally must have. but the workbook and sheet location is a must.)
View 1 Replies View Relateddetermining the correct formula to lookup various details from multiple worksheet:
Data as follows:
Sheet1: input
AB1MonthSales2AUG55003MAY4000
Sheet2: Data
AB1MonthSales2JAN20003FEB25004MAR30005APR35006MAY40007JUN45008JUL50009AUG550010SEP600011OCT650012NOV700013DEC7500
b2,b3 Formula = Indirect(Address(match(a2,????,0),1,1,1,"Data"))
i dont know what is the correct range inside the match fuction to identiy the row number inside the Data sheet, i think the solution would be match(a2,Data!a2:a13,0) but things might get complicated if you have multiple worksheet such as sheet2: Data , sheet3: Data2, sheet3: Data 3
and each table has unsorted details compared to others sheets (Data vs Data 2)
Use look up to check batches of data a return a value dependent of multiple ifs?
I have this formula from here
=LOOKUP(COUNTIF(C4:C7,""&0),{0,1,2,3},{19.9,29.9,39.9,49.9})
What I am trying to achieve is using the above can it check
C4:C7 Grouped and named "first"
C8:C10 Grouped and named "second"
C11:C13 Grouped and named "third"
If one from each group is selected it returns 1 value, if 2 of each are selected it returns a second value and if 3 of each are selected it returns a third value?
I thought by grouping them it may give me the desired results but all it does is change if I select more than one from any of the groups.
I have a data table that contains begin dates, end dates, and colors. The data is input starting with the earliest begin date. On a second worksheet, I have a listing of the years starting with the year of the first begin date and ending with the end of this year. I need to be able to pull any color choices associated with a year from the data table on the first worksheet. Some years may not be specifically listed in the data sheet as the person could have had the same color choice for several years. Sometimes a person could have more than one color choice in a year.
I am at a loss for how to get to the data I need. I created an example spreadsheet to demonstrate the data I am working with, and an example of what I need my results to look like in the end.
I'm looking to create a macro that will take data from an input sheet, and paste it into a cell in another worksheet, based on criteria specified in sheet1.
Specifically in the attached example, the macro would copy the data in cells C8:C10 of sheet 1, then paste them into sheet 2 based on the data specified in cell B3 i.e. it would paste them into the column headed Mar-09. I intend to make this cell a drop down, so that the user can then select the next reporting month and run the macro again to paste the data into the Apr-09 column.
In my workbook I have multiple sheets but I'm attaching a very simple workbook to demonstrate what I'm trying to accomplish. In my "Lookup" tab/sheet. I want to have known Latitude and Longitude data that will exist in columns A&B. Columns C & D will have address numbers and Street Name. I would like my lookup formula to find the longitude and latitude data from my "lookup" sheet, when the matching address information is typed in, in my 2009 sheet. I have to keep the street numerics and street name separate on this worksheet as well. I believe I'll need two separate lookup formulas as I need these formulas to start in cell G4 & H4 in my "GeoCoding1" sheet. Is it possible to have four columns of data to be viewed in a lookup formula? I tried this formula in cell G4 (GeoCoding1 sheet)
View 3 Replies View RelatedI have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
Excel offers many ways to use a key to lookup a value (VLookup, Index/Match, DGet, and the rest). What's the fastest way to perform a lookup of a small table of, say, 30 rows of key-value pairs? Theoretically, it would be most efficient to use a branch table (also known as a jump table). See the wikipedia article for branch tables: http://en.wikipedia.org/wiki/Branch_table. Does Excel/VBA have a way to create a branch table for such lookups?
View 9 Replies View Related
