I use sumproduct to put total qty into the Defect Table. But it take a long time for excel to run the counting process. Problem: From master data sheet, I want to plot the qty into the defect table follow by date occurring and by section
View 2 Repliesmy table is something like below:
my program sheet looks something like this:
I need a double condition formula to check the date, if matches the date Column (A), and matches product Column (b), then returns Column (C) which is the doc#.
I Could easily do it if it is a sum product formula, but in this case, it is alpha numberic.
date: 14 Jun (dd / mm)
product -- Doc#
apple ---- ac21 (so what formula do I put here?)
Orange --- abc2 (formula?)
date --- product --- Doc#
12 Jun -- apple ----- abc1
12 Jun -- Orange --- ab12
14 JUn -- Apple ----- ab21
14 Jun -- Orange ---- abc2
look at my attachment and see what I am doing wrong in my formula? I have a hard time understanding the Sumproduct formula and when to use comma's, double negatives, addition, etc.
View 2 Replies View Relatedi am working on a pivot report and it works fine so far, but the only thing i am trying to do here is when duble click on a total it opens a new sheet with the report needed but it names the sheet as sheet1 and so on (sheet2,3,4...)
is there a way when i duble click a total it automaticly names the sheet for me?
I have a spreadsheet in which I am trying to track invoices billed according to month in question. For example, I need to find total invoices billed in February for ABC Consulting Company. I have a database in the same spreadsheet that contains all invoices billed for an entire year for all companies. How do I pull invoices for a particular month only, in this case for the month of February? I have attached an example of spreadsheet in question. Included is a tab which indicates desired results.
View 5 Replies View RelatedI have a chart in my spreadsheet that shows number of claims per defect. Is there a way to format this bar chart so that it will only show the top 5 automatically, even when they are constantly changing? There are a total of 13 different catagories.
View 9 Replies View RelatedI've got two columns of numbers, such as:
(Col A) (Col B)
Cycle Bin
1 - - 3
1 - - 7
1 - - 7
1 - - 2
1 - - 5
2 - - 7
2 - - 9
2 - - 6
3 - - 7
3 - - 2
4 - - 2
4 - - 8
4 - - 2
4 - - 8
4 - - 5
I'm trying to get the total number of columns that have a specific match-up, for instance, how many cells are in Cycle 1 with Bin #7? ....
as u can see on picture I have some data and i want it to filter with "debet" and "credit",while debet can be zero or number x when in the same time credit can be zero or the same number x so when entering number x meaning e.g. 500 i get to rows
first
debet = 0 and credit = 500
second
debet = 500 and credit = 0
while running advanced filter i was getting nothing because i couldn't write what i needed
I am trying to get a cell in my spreadsheet to look up a value based on two values. I have a dropdown list that lists the worksheets in the workbook, and each worksheet has a table with width measurements for the columns and height measurements for the rows. I have a function that is mostly working, it calls the data from the proper worksheet, but it rounds the measurement values down, and I need it to round to the next highest value on the table.
For instance, the measurement may be 55" x 55" in, but the table has values for 54" and 60". The current formula rounds down to the 54" measurement, but I need it to round up to the 60". I have attached what I have so far with further notes and cells highlighted.
I can't figure it out it simply doubles the value the only thing i can think of is the totals in question that are related to subtotaled columns but is not subtotaled
View 9 Replies View RelatedI am trying to sum up the total number of hours consumed on a particular activity within a specified period.
=SUMPRODUCT(($C38:$C176>=$B7)*($C38:$C176<=$C7)*($B38:$B176=$D5))
Unfortunately, the formula above gives me the total number of activity and NOT the total number of hours within a specified period. I attached the file I'm working on as reference.
I have what I thought was going to be a simple function to create and, after a week of getting more error messages than I've had in a year, I'm ready to throw in the towel. Situation: There are two worksheets in the same workbook [Excel 2003]. One is for "Posting" details about technicians and their work orders. The other is a "Report" that summarizes the number of workorders open, closed, etc.
In the "Posting" sheet, I have created dynamic name ranges for two columns: Technician (4-digit text field) and InDate (date field that, if blank, means that the technician has not closed this work order. My ranges are set up like this:
Technician=OFFSET(Posting!$B$2,0,0,COUNT(Posting!$B:$B),1)
InDate=OFFSET(Posting!$D$2,0,0,COUNT(Posting!$D:$D),1)
So all I need to do is to total all the blank InDates for each Technician by employee number. I've tried COUNT to SUMPRODUCT. A co-worker got it to work with using...=SUMPRODUCT((ISBLANK(Posting!$D$2:$D$65307))*(Posting!$B$2:$B$65307=4288))
His solution was to list almost every available cell in each column. I just can't help but think that the dynamic name range should be able to work but I can't get it right. I think I'll choke if I get one more "N/A" or "VALUE! error.
Power.jpg I must write a double interpolation formula for the table.
View 6 Replies View RelatedI have a table that shows a row of dates, a row of campaigns, and then a row of values I need to reference. I need to pull the values for a specific date and corresponding campaign.
For example, I need to pull the value for campaign 'notset' on 6/16/09.
I tried the following, but it would only work on the first and last campaign: ...
I am having trouble getting the double lookup formula to work with a table. See attached sample.
View 2 Replies View RelatedWhat happens when I double click a cell in a pivot table?
Or when I double click the grand total?
I want to add buttom double border to cells in rows, based on data in column A via VBA,
I have a title in A1 called PO, every PO have variable numbers of rows. so i want buttom double borders for each group of PO.
I added an attachment of "Before and after" example.
I have an excel sheet with multiple pivot tables. I would like to customize the output based on a criteria when I double click on these pivot tables. Criteria could be different for each pivot table. Criteria for each pivot is to auto fit the contents, delete certain columns and format the contents.
View 1 Replies View RelatedI upgraded to Excel 2010 from Excel 2000 a couple months ago. In Excel 2010, after double-clicking on values in a pivot table to create a new worksheets, I'm unable to highlight those worksheets and add a column to all of them. I was able to do this in Excel 2000... I can't figure out what's stopping it from happening for the life of me. Am I missing something obvious here?
View 3 Replies View RelatedI should be able to do this by now but I keep getting an #NA error. I am
trying to use this sumproduct formula
=SUMPRODUCT(($I$7:$I$2585=921),--($L$7:$L$2585="Fb")--(AS7:AS2585)) where I
am looking up store #"921" and Attribute "fb and sum where these two criteria
meet. The column I want to sum is AS7:As285. What am I doing wrong.
In Column A1:A20, these are included 5 types of data (red, orange, yellow, green, blue); in column B1:B20, these are included the total salary amount, and in column C1:C:20, these are included "Sole" , "Joint" or "Partnership", so if column A is included red/yellow/green (excluding orange and blue) and column C is included Sole/joint/Partenship, and total salary is between 6000 and 9000, then calculate the total salary of all the customers. How can I use sumproduct function to fix it?
View 8 Replies View RelatedI am trying to match 3 values, and return a matching 4th from a chart. It will first look at one value and see if it falls between values (the LOAD value in cell B1..it will look to see if it falls between the "low limit" and "high limit" in columns A10 to A135 and C10 to C135, respectively. Then it will look for a match for the values in cell A2, and in cell A3. the return value will index to the corresponding value in column G10 to G135. I have written a formula to do this in cell D2....but it will only ever return the value in cell G10.
See the attached excel file : nozzle tester.xlsx
I am looking around any way wherein I can sumproduct the values as given in attached sheet, basically I wanted to know the total MRP value of Sale and Stock
View 3 Replies View RelatedI'm working on a spreadsheet at work and I'm trying to sum only the values in a column that meet criteria in the column next to it. For example, in the attached spreadsheet, I would like to have a totals line at the bottom of the spreadsheet for all three Facilities and the total next to them. I know I could do a pivot table but I know this approach would be more aesthetic and easier for my supervisor.
View 3 Replies View RelatedLooking to troubleshoot using a name range in a multiple criteria sumproduct formula.
For instance, this formulas works fine:
[Code]......
But, when I try to substitute the two-alpha codes as a defined name range ("keys"), it errors as "N/A":
[Code].....
An example workbook is attached : Example Workbook.xlsx
I am stuck - I have a large amount of data for a group of physicians I work for. I am trying to set up a monthly trend report to be able to run quickly after I plug in the data. I want to use some sort of lookup to look up two things - 1) the physician's specialty and 2) the month.
Can anyone look at the attached example and tell me how to do this? I have started a SUMPRODUCT formula, but am stuck on how to tell it to find only that month's data.
ID, Name, Point, Session
1111, Viking, 5, 1
2222, John, 6, 1
1111, Viking, 10, 2
What's the formula to get the Point cell value with criteria ID = "1111" and "Session = 2" ? In this case, it will return me the value of Point = 10
I have the following sumproduct formula that's providing solid results but I would like to add a 3rd column of criteria. I'v tired with little succes.
The following formula <=SUMPRODUCT(('IW 38 DUMP for Planning'!$A$1:$A$10000="2A")*('IW 38 DUMP for Planning'!$E1:$E10000={"PAA","RS","RSNR","S","SAM","SAMT","SAO","SAT","SOR","WKS"}))> totals all of the work in plant area "2A", in this case 52 records. I would like it to filter further with values in $H1:$H1000 matching criteria "CONTRACT", "MACH" OR "HTSMET".
The data is easy to find with pivot tables but I would like to take that manual step out of the reporting being doen from these records.
I am trying to get this sumproduct to work that will exclude two criteria:
1) If there is an error in the sum range (Y5:Y1000)
2) If right(H5,5)= D5& "Total"
This is the formula I have, but I'm not sure how to get the first criteria to work well, or how to get two exclusion criteria to work.
SUMPRODUCT(--($H$5:$H$1000=$D5&" Total"),--(ISERROR($Y$5:$Y$1000)),$Y$5:$Y$1000,$Q$5:$Q$1000)
I was wondering if I could use a range of cells as my criteria as opposed to inserting quotation marks with each criteria. For example in the syntax below can I do something like this? Report!$C$3:$C$5000=B45:B51?
=SUMPRODUCT((Report!$A$3:$A$5000="XXX")*(Report!$C$3:$C$5000=???)*(Report!$E$3:$E$5000))