Tabulating Correct Answers To A Test?
Apr 24, 2012
I would like to tabulate correct answers on a test given. The data is in excel as student answer (column header), with possible response of 0 or 1. Another column of Answer Key with response of 0 or 1. There are 80 total questions (rows).
I would like to be able to create another column of "Grade" with 0 (incorrect) or 1 (correct) so that I can tabulate % correct responses. I will eventually be analyzing correct responses by question, combining results with other students at same level, etc.
I will likely do further analysis in SAS, but want to get the data set together in Excel.
View 3 Replies
ADVERTISEMENT
May 21, 2007
In one worksheet I have 3 columns with a date at the top of the name column. It's not setup how I would prefer it, but this is the way it is for now.
Columns:
Name, Amount, Type
Ex.
5/21/07
B 25 M
C 15 T
D 40 M
B 10 M
In my other worksheet I have a list of all the names and types. This worksheet crawls the first worksheet and finds the week cell range.
Then, as far as I can tell, the sheet goes through the range once for each name and sums what it's looking for. With about 250 names and four different types it seems that each range is being cycled through once for each name and type. Sometimes the name isn't even in that week! The recalc time is horrible. I'm using plenty of INDIRECT and other bad functions that slow it down, but it works. Now that it works I'm looking for simplicity.
How can I go through a range once and subtotal what's there so that I can speed this up?
View 9 Replies
View Related
May 27, 2014
Is there a way to show the results of a survey (basic y/n) as a percentage of total surveys submitted?
I have also been charged with keeping the customer data (name/house number) visible when it's displayed as a chart?
Attached is a sample : sample.xls
Excel 2003 btw...
View 3 Replies
View Related
Aug 21, 2013
I am trying to determine Long Term Gain (LTG,) Long Term Loss (LTL,) Short Term Gain (STG,) Short term Loss (STL,) or No Loss nor Gain (NGL)testing two cells (A1 and B1)and setting a third cell (C1) to the text LTG, LTL, STG, STL, or NGL depending on the results of testing cells A1 and B1.
A1 represent a number of years and B1 represent gains or losses (negative)in dolars.
The way I see the logic is as follows:
If cell A1 or cell B1 are either one of them equal to 0, then it is neither a Gain nor a Loss (NGL.)
If cell A1 is greater than or equal to 1, then it is Long Term; else, if A1 is greater than 0 and less than 1, then it is Short Term.
On the other hand, if cell B1 is greater than 0, then it is a Gain; if B1 is less than 0 (a negative number,) then, it is a Loss.
I need to find (if it is posible in Excel) one formula to test the two cells for posible outcomes:
If A1 = 0 then C1 = NGL
If B1 = 0 then C1 = NGL
If A1 >= 1 and B1 > 0 the C1 = LTG.
If A1 >= 1 and B1 < 0 the C1 = LTL.
If A1 < 1 and B1 > 0 then C1 = STG
If A1 < 1 and B1 < 0 then C1 = STL
View 3 Replies
View Related
Feb 15, 2010
I'm trying to create a formula that will added the correct amount in the correct cells, I have create a dunny sheet in trying to achieve this. If Cell B8:B11 = ABS or Dum that any points won should be added to Cell L8:L11 right now its adding it into K8:K11. If Cell B8:B11 = is Blank any player points should be added to cells K8:K11. I'm using this formula throughout cells K8:K28 =IF(J8>J25,1,IF(AND(J8<>0,J8=J25),0.5,0)) Any thing in red is incorrect anything in blue is what I'm trying to achieve.
View 4 Replies
View Related
Jan 26, 2014
We receive about 20 sales files of several hundred lines of data each day from various agencies. I want to create a macro / VBA code which checks that the data submitted is correct so that we can upload it into our database without import errors and / or having to manually check each line of data.
I envisage something like an output report:
#####################
149 entries
Column A - Date - OK
Column B - Customer_Phone - Errors (Should be 11 digits)
Row 21 - Customer_Phone - Error (Not 11 digits)
Row 108 - Customer_Phone - Error (Contains letters)
Column C - Outcome - OK
Please correct and re-check.
#####################
View 4 Replies
View Related
Jul 3, 2008
I have a table with 3 columns of dates and then a column with Set # that I
feel in the box #.
I need to see how many items processed for each set per day.
Example:
[url]
The problem is that it counts the correct amount but not with the correct
dates.
The formula that I use is:
=SUMPRODUCT(--($I$3:$I$8<>"")*(($C$3:$C$8=39601)+AND($E$3:$E$8=39601)+AND($G$3:$G$8=39601)))
View 14 Replies
View Related
Aug 28, 2008
I have a sheet with this:
cell a1 = numbers from 1 to 10 or nothing
cell b1 = TO or OFF depending on cell a1
cell c1 = numbers from 1 to 10 or nothing
Now I have a formula in cell b1 that detects if theres text in cell a1.
IF A1 = nothing, then b1 = off, else b1 = to.
What I want to achieve is to do 2 things on the IF.
If a1 = nothing, then c1 = nothing and b1 = off. else, b1 = to.
how can I do this?
I looked everywhere and no one speaks of double answers on IF.
View 11 Replies
View Related
Dec 3, 2008
Cell C7 is a drop down list with 3 possibles (Consumer,Commercial, Public). Depending on which is chosen, I want Cell C10 to provide a different list of possibles (Consumer Products, Commercial Products, Public Products).
I have tried to create a custom IF statement with the list choice & sometimes it refuses & sometimes it gives me the list, but with the formula string as the drop down options.
Is this forumula possible or is it beyond excel's capability?
View 7 Replies
View Related
May 16, 2013
I have a spread sheet that looks like the following. I need to take all of the Y answers and make one line.
Client
ProductA
ProductB
ProductC
ProductD
ProductE
ABC Inc
N
Y
N
Y
N
[Code] ......
If any of the Product columns had a Y in the row, the line would get the Y. If not, an N.
View 5 Replies
View Related
Apr 26, 2006
I am trying to achieve the following in one formula.
IF an amount is greater than 0 and less than 500,000 put in 490
IF an amount is greater than 500,000 and less than 1,000,000 put in 1000
IF an amount is greater than 1,000,000 and less than 4,000,000 put in 2205
IF an amount is greater than 4,000,000 and less than 9,000,000 put in 5000
IF an amount is greater than 9,000,000 and less than 10,000,000 put in 6500
IF an amount is greater than 10,000,000 and less than 15,000,000 put in 7500
IF an amount is greater than 15,000,000 put in 9500
View 3 Replies
View Related
May 8, 2006
here's the formula that I'm using: =INDEX($C$35:$AF$35,MATCH(MAX(C41:AF41),C41:AF41,0 )) where $C$35:$AF$35 contains names of people & C41:AF41 contains #'s. This works great if there isn't a tie. Is there a formula to search the range, find the max # and if there are two answers display both names. ex. the max# is 3 and both joe and sam have 3. it would then show joe / sam or something like that. Is this possible? If not, then if there is a tie for the max #, to have the cell just display tie.
View 4 Replies
View Related
Jan 18, 2010
I have created Excel spreasheets for our payroll. The answers on my calculator are sometimes different than my spreadsheet. How can I make them tie?
View 9 Replies
View Related
Oct 25, 2007
I have a workbook filled with many tabs / sheets. Each sheet contains the same structure of information and isn't an important aspect of this question.
I've looked at this topic http://www.mrexcel.com/board2/viewtopic.php?t=16683 and I'm unable to follow it well.
Is there a way to search all the tabs for a word and if it matches to copy the entire row into the search tab / sheet? Specifically for each and every searched match.
It would save my users trying to search each tab individually and possibly miss the data they are actually looking for. Hundreds of people use this reference workbook which stores where all our documentation is stored across numerous servers. Each row is one document and its corresponding storage information.
View 9 Replies
View Related
Jun 26, 2008
I have a table whereby I Vlookup a different spreadsheet on an order number (in this instance Z011352/001). There are multiple sketch numbers associated to this Z number.
I would like to be able to input the Z number and then obviously the Vlookup pulls up the first sketch number. This works fine.
If I then input the same Z number again it pulls up the same sketch number, but I want it to look in the current table (the one i'm entering the Z number onto), see if the sketch number is already present and if it is pull up the next sketch number in the list on the separeate spreadhseet. (I hope this is clear enough)
My Vlookup code is:
=IF(C1070"",VLOOKUP(C1070,'[CrossingsSchedule.xls]Update Worksheet'!$E$1:$AC$10000,20,FALSE)," ")
View 9 Replies
View Related
Dec 12, 2008
How would I write out a formula if I currently have this formula/ =COUNTIF(D6:Q6,"a")*8 on cell S6 but I also want to include/ =COUNTIF(D6:Q6,"a-1")*1 and =COUNTIF(D6:Q6,"a-2")*2 and so on till a-7 and i want all this to read on the same cell.
View 9 Replies
View Related
Jan 12, 2009
I have a message box in my spreadsheet. I want it so if the user puts in multiple answers that certain message box appears, if they put in a different set of multiple answers it shows up. For example, the code below is what I am using now. It says that if the user types 5225 in C16 and 3000 in C17 then a specific msg box appears. I want it to say if the user types in 5225 or 5226 or 5227 the same msg box appears but if they type in 5665 a different msg box appears. How would I change this code? ...
View 9 Replies
View Related
Sep 3, 2009
This is my current formula that im using in cell U6
=IF(L6>=500,"Sept 8 2009","Sept 1 2009")
it works fine with just 2 answer cuz if its not one answer is another
=IF(AND($B$2>=0,$B$2>=500),"Sept 8 2009","Sept 1 2009")
found this one online but it got frustrating...i change the values to mine
so what im looking for is a if formula or similar to the following
if L6 is between 0-500 i want U6 to say Sept 1 2009
if L6 is between 501-750 i want U6 to say Sept 8 2009
if L6 is between 751-999 i want U6 to say Sept 15 2009
if L6 is between 1000-1200 i want U6 to say Sept 22 2009
i try both if formulas (stated above) both but both return one or more results...i just want one
so....Example
L6 U6
***(decimal included)
0.00 than i would get the result Sept 1 2009
253.52 than i would get the result Sept 1 2009
647.36 than i would get the result Sept 8 2009
750.01 than i would get the result Sept 15 2009
1100.00 than i would get the result Sept 22 2009
if above 1200 i would get the result sorry your amount owed is to high
formulas are preferred *but will work with macros and other options
*if using macros or vba or what have you please explain how it will work
View 9 Replies
View Related
Jun 4, 2014
In the attachment, on the totals sheet I am doing a count of the results on Sheet2. Under "Alcohol as it Applies to Me" on Totals I am trying to count the 5 different categories, but the original question is a pick all that apply so at times there are multiple answers. I can't figure out the formula to count each phrase when there is multiple answers.
HRA Results.xlsx
View 2 Replies
View Related
May 6, 2014
I am using the formula =IF(OR(E2="COLD"),"33%")
Which changes my cell to show the text 33% if the text cold is entered into cell E2. Now what I would like to know, is if I can add multiple catch words to give alternate pre defined percentages. Such as warm and hot to give the respective answers as 66% and 99%
View 3 Replies
View Related
Dec 18, 2008
I have created a workbook that I store data from my audits, this data is in the form of Y if compliant, N if noncompliant and N/A if not applicable. Where the fun part begins is that each question has a different risk involved. I have used a simple 1 to 5 risk scores and given scores for compliance and non compliance to each score, for example a risk 1 if compliant is 100 points, if non compliant is -100 points, all the N/As are worth 0.
I currently calculate the totals in a different sheet in the work book, but I do this kind of manually, I have calculations to work out the totals and percentages and all that, but I cannot figure out how to get the Ys and Ns to appear in this sheet as 100 or -100. All I do at the moment is bring the Y, N or N/A over with a simple =corresponding cell in sheet 1 then manually change this to the number I require.
View 4 Replies
View Related
Apr 22, 2009
Would like to sum a table without putting individual answers on each row and summing column. The table can consists of 100's of rows but only 3 columns.
lbsratehrs
Item 1100.10
Item 250.525
Item 3200.2550
Total Lbs/hr0.2 (answer)
Find lbs/hr for each item and sum all items lbs/hr
(lbs*rate)/hrs
View 3 Replies
View Related
Apr 9, 2012
On my spreadsheet i want to find the results from 2 criteria that i entered.
My search criteria are "Oostbos" and "AA8", and excel has to find this from another spreadsheet that i made for rostering.
OostbosN3 evelineAA8N3 evelineAA8N2 MargaAA7
The problem is that i have multiple shifts with the "AA8" criteria, but my function only finds the first one.
I used the following function:
Code:
=IF(C8="";"";INDEX('Afdeling PG PH'!$A$6:$A$28;MATCH(C8&$A$7;'Afdeling PG PH'!$B$6:$B$20&'Afdeling PG PH'!$AI$6:$AI$20;0)))
Also when the AA8 cel is empty that i doesn't show anything.
How the second N3 eveline, shows the 2nd result and so on.
View 1 Replies
View Related
Jan 13, 2009
I am currently maintaining a database that keeps up to date records of employees in my company and their vacations including their nationality dept. etc. for the vacation reports i have a "last day of work," "return to work date," "Actual Return to work date," and at the end a "remarks" column,
Moreover I need to report how many employees per department/Discipline are on leave ex. ( mechanical, electrical, and so on.) That I did using countifs having whoever is remarked as "na" vs. actual return date, Discipline vs. each discipline. All works fine but what i want to ask is there anyway that i can list the names of employees that are on vacation under each discipline?? Ie. if 3 are in the electrical engineering department, can i list their names? or if Today()>Actual Return to Work day (ie they are late and have not arrived yet) is there a way that it can list the names of multiple employees? rather than having to work against each name etc.
View 10 Replies
View Related
Jul 2, 2014
Instead of trying to explain my challenge, the attached workbook should be self explanatory. My answer is surrounded by the box. I need a formula that would automatically provide this output.
Lookup Scenario.xlsx
View 9 Replies
View Related
Mar 4, 2014
I have 2 worksheets, Worksheet 1 has Customer Magic Number on it as a reference and a few customer details and Worksheet 2 has Customer magic number and contact fields.
I am currently using the formula
=INDEX($C$3:$C$575, SMALL(IF(N2=$D$3:$D$575, ROW($D$3:$D$575)-MIN(ROW($D$3:$D$575))+1, ""), COLUMN(A1)))
to show the contact codes in sheet 1 however I also need to show the Notes which are located in Columns G:I, Is there an easy to use the index & match functions as above with the concatenate function to add the notes in the cell beside where I am inputting the contact codes?
View 2 Replies
View Related
Mar 25, 2009
I'm trying to figure out how best to build a table to do:
IF A1="yes", "no", "na" and
IF B1="yes", "no","na" and
IF C1="yes","no","na" then
"AT" or "IC" or "VE"
So, I need a table that can look up responses to three questions, then lookup the corresponding answer (AT, IC or VE). Some of the combinations of anwers will yield the same anwer (i.e: yes, yes, yes=AT and yes,yes,no=also AT). I'm trying to come up with the most probable answer by evaluating these three questions; Thus; 10 combinations will yield an answer of "AT", 10 combo will yield "IC" and 7 combo will yield "VE". I've done this with 2 variables, but can't seem to get it to work with three...
View 4 Replies
View Related
Feb 26, 2011
How to generate a list of numbers of this function in Excel: COMBIN(20,3), but i want the combinations of numbers. I want to create a list of 20 questions and every question has 3 answer. I think that are 1140 combinations.
View 9 Replies
View Related
Mar 28, 2008
I have a table in excel that i need to use to mark a 20 question quiz. I have the correct answers in one column and the students answers in the next column. I want to mark a correct answer with 1 and an incorrect answer with 0 marks. I know how to use IF, however the students answers can vary eg, correct answer could be B and D but the student writes B + D. Is there any way of marking this correct even tho it is not exactly written out correct?
View 6 Replies
View Related
Dec 16, 2013
I am new to Pivot Tables and I am having difficulty displaying a count of data in a column with Y/N answers.
Previously I would have undertaken this using the SumProduct function in a standard table.
I attach an example workbook with my data, what I want it to look like and the pivot I have created.
Book1.xlsx
View 4 Replies
View Related
