To Check Whether An Ocx Is Already Registered
Oct 14, 2008how to check whether an ocx is already registered when template is opened in excel?
this is to register an ocx control used in the xlt.
ADVERTISEMENT
Hyperlink - No Program Registered
Jan 19, 2007I have a hyperlink to a PDF file, that when clicked gives me the usual "Some files may contain a virus..." warning, but then gives me a "No program is registered to open this file." message...
I have the latest Adobe Reader installed, and the file opens without problems from any other location (just not from Excel)...
Other hyperlinked file types open fine from within the same worksheet.
PDF is listed in Control Panel > Folder Options > File Types, and is associated to Adobe Reader...
UserForm - Component Not Correctly Registered
Feb 19, 2012When I try to open an Excel-file from my employer with Excel UserForms I recieve following error messages
Code:
Component not correctly registered
and
Code:
Unexpected error (336)
I can see the code behind the UserForm, but not the UserForm. I've made the same mistake myself last time I created an UserForm, but I don't know what to do different.
Macro To Force Format And Check Barcode Check Digit
Nov 27, 2009My company uses 4 types of barcodes 8, 12, 13, & 14 number barcodes for our products my problem is that I can't figure out how to force the barcode to format properly no matter how somebody enters it if they don't use spaces or put them in the wrong spots, I can't use custom formats because there is 4 different layouts
8 digit should be "#### ####"
12 digit should be "###### ######"
13 digit should be "# ###### ######"
14 digit should be "# ## ##### ######"
these barcodes are in columns L, M, & N also right now 'm using a formula in another cell to verify the barcodes by calculating the check digit and comparing it to the check digit typed the formula i'm using is
VBA Check If A Cell Is Empty - Move 7 Cells Over And Check Again (Loop)
Aug 10, 2012I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
VBA Spell Check - Dont Ask To Check Rest Of Doc?
Nov 3, 2008I am using this code
View 5 Replies View RelatedCheck Box Controlling Other Check Boxes?
Jul 4, 2014I want to have 1 check box affect 3 others in the following way: check box 1 if checked, allow check/uncheck of check boxes 2, 3, 4 if unchecked, uncheck boxes 2, 3, 4 and do not allow checking check box 1 is linked to D1 which starts with a value of false. cell E1 is if condition to have value 1 when D1 has value of true.
I have attempted to attach an example worksheet.
Test check control.xlsx
Check All Check Boxes With CheckBox
Sep 9, 2007I am creating a userform with 10 checkboxes. The first 9 checkboxes are user options. I want the 10th check box to be a "Select All" option i.e. if the 10th checkbox is checked all the other 9 options are deemed to have been selected.
The way I want the display to work is that if the 10th checkbox is ticked all other checkboxes are cleared. Also if the 10th checkbox is ticked and any of the other check boxes is selected then the 10th checkbox should be selected.
I have tried coding this up but the checkboxes don't seem to operate as desired. I placed some code on the click event for the last option button to set the vlaue for all other buttons to false. This works but the 10th check box doesn't get ticked itself. When I try to code up the other bit I get similar issues.
Uncheck Check Box + Check A Option Button Using Command Button
Aug 20, 2009When I press a command button I want to:
Uncheck a checkbox made with Control Toolbox
Check a particular Option Button within a group box made with the Forms Toolbar.
EDIT: Clarification, I want both things to happen when I click one button.
Check Boxes Macro: Macro That Will Check If The Boxes Are Checked And If Not Ignore Them And If So Run A Certain Macro
Jul 28, 2006I have numerous hyperlinks in cells on a worksheet, next to these I have checkboxes. I am looking for a macro that will check if the boxes are checked and if not ignore them and if so run a certain macro.
View 6 Replies View RelatedCheck If Value Has Already Been Used
Oct 31, 2011Users can start an automatic copying process (active row from active sheet to sheet 2) by simply putting a date in a cell in column K. The activecell.row is copied over.
As part of the copying process, the value in cell D on the active row (the serial number) is copied to sheet 2.
Before this happens, I would like a checking procedure added to the code which will stop the same row being copied more than once, thus avoiding duplicates.
I have tried InStr and also worksheet.CountIf but can't figure this out.
Code snippet below.
If InStr(1, Sheets("Sheet!2").Range("A:A" & lngLastRow), TempRef) Then
Where the value in TempRef (the serial number) is searched for in Sheet 2 col A.
Check If A1=A2, Then If A3=A4, Then If A5=A6
Mar 5, 2008I have a sheet with 2329 rows. Row 1 & 2 should be the same number, then rows 3 & 4 should be the same, then 5 & 6, etc (see example below). This should result in an even number of rows, so either 2328 or 2330. So somewhere in this sheet, I either have a number repeated twice instead of just once, or a number that's not repeated at all. Is there an easy way to highlight where the error is without having to manually scan all 2329 cells?
23059
23059
23069
23069
23099
23099
23109
23109
23128
23128
Check Box Or To Not Check Box
Oct 21, 2009I am trying to create a basic spreadsheet in MSExcel used to collect standard info (Name, address blah blah blah). The people who will complete this will need to classify the people they are listing into groups (Group A, Group B etc. 5 groups total) and each group will be listed on a separate tab of the workbook (maybe this isn't the best way?).
As they enter the people they will need to decide if the person they are adding is to receive the welcome kit. Each company is limited to 50 welcome kits. My thought is to use a check box for them to indicate yes or no on the welcome kit.
Is there a way to display the number of welcome kits that are remaining on whatever tab they happen to be on?
Is there a way to give a clear indicator next to each name that 'yes' has been selected (colored box, text?).
Check For A Value
Mar 4, 2007Is there a VBA function using which i can check for the existence if a particular value on an Excel ?
View 4 Replies View RelatedAt Least One Check Box Must Be Checked?
Jun 15, 2013I am using an array from another application for option buttons. I have attempted to adapt this code for checkboxes but with no success.
VB:
Option Explicit
Private Sub cmdadd_click()
Dim wrs As Worksheet, i As Long, x As Long
[Code]......
Check If Row Is 0 Or Blank
Apr 21, 2014I have a number of rows that contains data (normally numeric):
0 | 0 | 0 | 0 | ... |True
1 | 0 | 0 | 0 | ... |False
0 | 1 | 0 | 1 | ... |False
What's the formula that gives the True/False answers? I could go IF(AND(A1=0,B1=0,etc...),TRUE,FALSE) that gets the results, but can it be done in a smarter method or can it done via array method?
Range Check..?
Nov 20, 2009Is there a formula that I can use to check that all the depths are in a range of 1 to 5. If one depth is say 6 then this must be flagged up
View 4 Replies View RelatedFormula Check And Get
Nov 30, 2009I need two formulas that can do the folowing:
• check whether a cell contains text, if so, then trim all spaces and get result. If it doesn't contain text then set the result as blank.
• check whether THE CELL T13 contains text, if it does then check the adjected cell (U13) if it contains text, if so, then concatenate the two cells with a space between them and remove any other spaces. If the T13 doesn't contain text, the set the result as blank. Also, I have another question: how could I use the counta formula without counting spaces?
Check Out Of Date
Oct 19, 2007what is the vba code to check this conditon.
my excel file .sheet name "abc" . if cell "a3" have any value . and cell x3 values >=cell x10 ,then it show the input box to call new password "1234"
msgbox showned " true password you can work it now"
if user put wrong password .the workbook is cloesd with the msgbox "wrong password" then the application closed exit.
-cell x3 is datetime values "now" to compare with the cell x10 is the datetime "01012009 8:00" to check the outof date of the application
Check Box Toggle
Jun 18, 2008I am working on a sheet in Excel 2007 and am having trouble with Excel toggling with a checkbox. What I want is for a cell to have "A" in it if the box is checked and a "B" if it isn't. The code I have is:
Sub CheckBox6_Click()
If CheckBox6 = True Then
Range("B20") = "A"
Else
Range("B20") = "B"
End If
End Sub
How To Check If Range Contains Certain Value
Aug 17, 2008Is there a way to test if let's say range a1:a10 contains a value of cell b1.
I would be thankful to get the VBA code to do that
How To Check All The Rows And Add To The End
Sep 22, 2008I have a problem with my Excel Sheet, i am trying to write a macro that it checks the ids under the id column
Example:
ID | Ast Code | Ast 1 | Ast 2 | Ast 3
----------------------------------------
Id1 | Ast 1 | 1 | empty | empty
Id1 | Ast 2 |empty | 1 | empty
Id2 | Ast 3 |empty |empty | 1
Id3 | Ast 3 |empty |empty | 1
Id3 | Ast 1 | 1 |empty |empty
Than it must check for the duplicates ids what Ast Code they have, than at the result it must write from the previous one or from the after one take the Ast Code and write it near it..
For Example:
ID | Ast Code | Ast 1 | Ast 2 | Ast 3
----------------------------------------
Id1 | Ast 1 | 1 | 1 | empty
Id1 | Ast 2 | 1 | 1 | empty
Id2 | Ast 3 |empty | empty | 1
Id3 | Ast 3 | 1 |empty | 1
Id3 | Ast 1 | 1 |empty | 1
Spell Check Via VBA
Oct 13, 2008I have is that the code does call the spell-check up and it goes through the motions.
However, when you perform this manually (as in from the toolbar), the spell-check accepts the items as you put in the text bar at the top if you change it.
When doing it via the VBA macro code, it will not accept the user amended-suggestions unless you highlight the (top) text bar area/row/cell to get it to accept some things - otherwise it just accepts the suggestion the checker gives n the section below - not the text you have amended.
If-then To Check Cell's Value
Nov 3, 2008I am using a menu button to run a macro. Before running a particular Macro, I would like excel to check if the cell A1 of a worksheet named 'MC_1921' contains the phrase 'Master Curve' ...if it does then the macro runs otherwise gives an error message.
View 4 Replies View RelatedCheck Box - Select All
Dec 16, 2008I have about 1500 check boxes and I don't know how to select all and deselect all. Check boxes are on a user form and I really need them all because each on of them represent one daily activity which I use for prediciting future activities.
View 2 Replies View RelatedCheck And Set References With VBA
Mar 11, 2009for example, is it possible to check if a Reference to Set a reference to Microsoft Internet Controls (shdocvw.dll) has been enabled in user Reference settings. And if not set, then set it via VBA
View 4 Replies View RelatedCheck Box Functions
May 18, 2009I have a cell (D19) that I want to be automated to return a value based on a formula (it will equal Cell D15). But I also want to have the ability to allow the user to override this and enter a manual value if needed. My idea on how to do this is having a check box with a macro where if it is checked it will unlock the cell and clear out the formula and when checked it will reenter the formula and lock the cell.
Also same form - I need a check box that will check all applicable check boxes (all boxes under Deductions to be taken). Can anyone assist me in setting up these check boxes so that my functions will work, or if there is a "better" way of providing these functions please let me know.
Highlights The Check Box In Red
Jul 30, 2009Just wondering if it is possible to put a check box with a macro say in cell C3 that when you tick the box it changes it to green as completed, but after a set time say 2 weeks the check box clears itself and changes the colour to red to highlight that its due again. Also when you tick the check box it inserts a date in another cell say D4 when it was ticked.
Reason for this is am trying to make a spread sheet with different products that require different testing frequency, some monthly some weekly and some fortnightly. At the moment we are just using a white board and staff just tick task completed problem is they need to check when last done especially when test required is of every 2 weeks and people forget.
If I make a spread sheet and it highlights the check box in red like I want to above at least it will give them a visual reminder that it is due.
Using Check Box To Delete Row
Aug 14, 2009I'm trying to repurpose this script I found so it deletes the row in an excel spreadsheet when it is checked. The current script just hides them. I'd also like to see ifthere is a way to have the row number automaticaly referenced via the checkboxes cell link so I woudn't have to make a custom macro for each row I want to have he checkbox delete feature.
Here is what I'm trying to repurpose:
Sub HideRows()
If Rows("9").RowHeight = 0 Then
Rows("9").Hidden = False
ActiveSheet.CheckBoxes("Check Box 346").Visible = True
Else
Rows("9").Hidden = True
ActiveSheet.CheckBoxes("Check Box 346").Visible = False
End If
End Sub
Check If A Value Is Between Two Dates
Aug 25, 2009My mind has gone blank, and can't seem to get this working.
I want to check if a value is between two dates (the value is self is also a date).