I have a number of rows that contains data (normally numeric):
0 | 0 | 0 | 0 | ... |True
1 | 0 | 0 | 0 | ... |False
0 | 1 | 0 | 1 | ... |False
What's the formula that gives the True/False answers? I could go IF(AND(A1=0,B1=0,etc...),TRUE,FALSE) that gets the results, but can it be done in a smarter method or can it done via array method?
code to get to know about the sheet in a worksheet is blank and then delete that.
View 5 Replies View RelatedI'm trying to scan a column of data, example column H, for empty cells, if it's empty then skip it. This doesn't work, because cell.Value = " ":
If cell.Value 0 Then
'Extra coding
Else
End If
When a file is open, if cell A1 has a text "Hello there", then I want to make this cell add a blank space as "Hello there ". Let's save this file and close. So now if I re-open it, I want cell A1 to remove the added blank space and revert to be "Hello there". This take turns to change back and forward.
View 8 Replies View RelatedHow can I write code to test if a cell is blank? My code is using "isempty" but I keep type mismatch error because my cells are filled with formulas that make the cells blank. It only works if the cells are truly empty with no formulas.
View 8 Replies View Relatedi attach my sample excel file here, book1.xls. sheet1, "input". it check the column "C" row by row and if it detect the different content data in next column, it will auto insert a new row. it will ignore the space. below is my coding:
View 3 Replies View RelatedI have a vlookup formula I would like to add another If statement to.
=IF(ISNA(VLOOKUP($O2,Table!$A$2:$I$72,9,0))=TRUE,"Not In Table",VLOOKUP($O2,Table!$A$2:$I$72,9,0))
This works fine, but if the field that it is returning (9 in the case above) is blank, I get a zero in the destination cell.
Can I add another check in this formula to see if the destination cell is zero, but display a blank?
See attached spreadsheet for example of the sheet I am using.
Problem 1.
Columns C and D show me figures when the number in col A is > 2500 or < 550 when these criteria are not met a 0 is displayed in the cell, is it possible to alter my formula so that nothing (a blank cell) is displayed rather than a 0 - I am wondering if there is something like null which I can use?
=IF(A4>2500,A4,)
=IF(A4<550,A4,)
Problem 2.
In column E (normal days) I want to display the value of A if it is > 550 but < 2500 - is there a way of doing this in a single formula? Again I would just like a blank to be displayed if the value of A does not meet the above criteria.
I have X amount of cells (formulasheet) , these are used to input data, which is then summarized into a sheet on the same file. I'm trying to find a code that forces the user to fill out all the fields. If the user do not, the "submit button" will not proceed, at least not work. Almost like a forum registrating, where it is required to fill it all some mandatory fields in order to proceed.
The cells datatypes are mixed, some are Integer and some are String.
Is there anyway that are code can be written "if the cell(s) is FALSE (nothing in the cell) then display message.
Does excel have a formula to check to see if every row in a specific column is blank and if it is then set the value?
View 10 Replies View RelatedI am building a table for staffing purposes, and I basically only need to controls to "validate"/approve the table.
1. The number of staff put in must equal the required amount of staff (E column)
2. The same staff cannot be put on twice for the same time period (which I have done by the OR(F7=G7,F7=H7,G7=H7) as part of the validation)
My problem is that sometimes I need 0 staff (when its closed), but when I leave it blank obviously it wont approve the table because of rule #2 above, since it thinks the blanks are the same staff member.
I have tried with some ISBLANK statements, but it wont work.
Got a table where I've placed Data validation - List on them.
Placed a macro on a button so that the data on the table where the validation list is placed is transfered to another sheet (same workbook).
What I need is a to modify the macro assigned to the button so that when the button is clicked to activate the macro:
a.) Can identify if there are any blanks on specified cells with validation list
b.) Stops the macro from copying the fields to the other sheet
c.) Alert the user of the blanks (an alert stating there is a blank would suffice)
d.) Alert should preferably be similar to a Stop alert from Data Validation.
Can anyone help? Been reading through several threads but don't seem to find anything that could help me - tried reading a Visual basic thread and now i've got a headache....
with some basic code. I want to check the activecell, if it's blank then copy the contents from the cell above, if it's not blank, leave it & go down to the next cell & repeat until last row.
View 7 Replies View RelatedI am using a Uderform in order to check if some cells in several columns are higher or lower than values I set in my textboxes.
However, I think I am having a mistake in my code (it runs but doesnt return the correct informations) as I have blank cells in certain columns.
Concretely I am giving 1 point if the criteria is valid (if for example the value in the cell is <= 1) but some of these criteria are 1 when they should be 0.
As I said it runs but I need to add a fix for empty cells / blank cells and if possible N/A error cells in this so that the code gives 0 to the criteria and moves to the next column (next select case)..
I have attempted to alter this example to simply check if the cells are not blank by replacing the "X" with "<>", but I get errors in the SMALL function--it looks like the IF statement is just returning an array with all of the values set to FALSE, and none of the values in the array call out a location of the next filled cell.
How could you alter your fixed XLSX file to check for non-blank cells instead of "X" specifically?
I have 12 different sheets named April-06-sales through to march-07-sales. I need is to be able to search all of the sheets and check if the invoiced paid column is blank and if it is copy that row into a new sheet. All of the sheets have a different number of rows.
View 2 Replies View RelatedI need a formula that will search the range D8-D100 to confirm that all cells within that range are either 11 characters in length or blank. I will use it inside of an error message that will look something like this:
=IF(****formula that checks to make sure all of the cells in that range are blank or 11 characters****=TRUE, "", "Please make sure that all cells are 11 digits or blank")
Looking forward VBA coding for:
If input is entered into column C (range C2:C100), then row cells for columns D, E ,F, H or I must NOT be blank upon save.
Could be that one or more of these row cells are left blank by mistake.
An error msg pops up upon attempting to save, stops the save and colors each cell yellow that needs info entered into.
Using Excel 2010.
My company uses 4 types of barcodes 8, 12, 13, & 14 number barcodes for our products my problem is that I can't figure out how to force the barcode to format properly no matter how somebody enters it if they don't use spaces or put them in the wrong spots, I can't use custom formats because there is 4 different layouts
8 digit should be "#### ####"
12 digit should be "###### ######"
13 digit should be "# ###### ######"
14 digit should be "# ## ##### ######"
these barcodes are in columns L, M, & N also right now 'm using a formula in another cell to verify the barcodes by calculating the check digit and comparing it to the check digit typed the formula i'm using is
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
I am using this code
View 5 Replies View RelatedI want to have 1 check box affect 3 others in the following way: check box 1 if checked, allow check/uncheck of check boxes 2, 3, 4 if unchecked, uncheck boxes 2, 3, 4 and do not allow checking check box 1 is linked to D1 which starts with a value of false. cell E1 is if condition to have value 1 when D1 has value of true.
I have attempted to attach an example worksheet.
Test check control.xlsx
I am creating a userform with 10 checkboxes. The first 9 checkboxes are user options. I want the 10th check box to be a "Select All" option i.e. if the 10th checkbox is checked all the other 9 options are deemed to have been selected.
The way I want the display to work is that if the 10th checkbox is ticked all other checkboxes are cleared. Also if the 10th checkbox is ticked and any of the other check boxes is selected then the 10th checkbox should be selected.
I have tried coding this up but the checkboxes don't seem to operate as desired. I placed some code on the click event for the last option button to set the vlaue for all other buttons to false. This works but the 10th check box doesn't get ticked itself. When I try to code up the other bit I get similar issues.
When I press a command button I want to:
Uncheck a checkbox made with Control Toolbox
Check a particular Option Button within a group box made with the Forms Toolbar.
EDIT: Clarification, I want both things to happen when I click one button.
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedThe below piece of code carries out a vlookup on a defined cells value and produces a result in sheet one, however if the column index number in sheet 2 (Database) is empty the result 00/01/1900 is produced.
I'm not sure how to say leave the result blank if the column index number is blank.
Excel 2010
Userform = Tab 1
Database = Tab 2
I can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
I have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
