How can I get excel to always perform a spell check before I close the document. I've tried using VBA but it won't execute. (I'm really bad at VBA.) This is what I tried but it wouldn't work:
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Cells.CheckSpelling SpellLang:=1033
End Sub
How can I get excel to always perform a spell check before I close the document. I've tried using VBA but it won't execute. (I'm really bad at VBA.) This is what I tried but it wouldn't work:
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Cells.CheckSpelling SpellLang:=1033
End Sub
I am using this code
View 5 Replies View RelatedI have is that the code does call the spell-check up and it goes through the motions.
However, when you perform this manually (as in from the toolbar), the spell-check accepts the items as you put in the text bar at the top if you change it.
When doing it via the VBA macro code, it will not accept the user amended-suggestions unless you highlight the (top) text bar area/row/cell to get it to accept some things - otherwise it just accepts the suggestion the checker gives n the section below - not the text you have amended.
I have initiated a spell-check in VBA using:
View 14 Replies View Related
I have a set of text boxes in my sheet. I was wondering if there is a way to perform a spell check on the textboxes only (not the cells in the worksheet).
I have tried searching the code on the forum, found some which are using 'MSForms.TextBox', dont know why I am getting error.
How to perform the operation using Oleobject.
I am working on code breaking, and am working on trying multiple letter combinations, and was wondering if I could spell check the results and have that identify letter combinations that ARE words.
Is it possible to use spell check on a protected sheet?
View 9 Replies View RelatedWe're setting up a test for candidates in an Excel 2010 workbook and want to get a sense of their native ability to spell. We'd like to disable spell check for the entire workbook. I've looked in Options>Proofing, even tried removing the dictionary, but haven't found a way to completely disable spell check from working. Is it possible to achieve? We'd settle for being able to disable spelling within a textbox.
View 7 Replies View RelatedCode to check if a workbook is open, and close it, if it is.
View 4 Replies View RelatedI am trying to ask to the user to check if they logged out when they close the workbook but my code is not working...
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Sheets("OD&D Log-in").Select
If Range("H5") = "reconcile" Then
a = MsgBox("Do you want to Log-Out?", _
vbYesNo)
If a = vbNo Then Cancel = True
If a = vbYes Then
Sheets("OD&D Log-in").Select
Else
Workbooks("Daily OSD Log (ver5).xls").Close SaveChanges = True
End Sub
I want to know about how to spell the numbers in words
View 3 Replies View RelatedI was modifying some code in a script and now every piece of code that was like this:
View 4 Replies View RelatedI am using Excel 2003 and have a column within my spreadsheet that, through a formula, inserts a decimal that has formatting to show as a percent. I would like to know who to convert that number to words. I saw spellnumber (and love it!) but don't know how to edit it so that it converts properly.
View 9 Replies View Relatedwhy I would be having trouble using the following formula in excel. Its purpose is to spell a number in english with dollars and cents. I have used the formula before and it has worked just fine, but now the formula will only give me " NAME".
Option Explicit
'Main Function
Function SpellNumber(ByVal MyNumber)
Dim Dollars, Cents, Temp
Dim DecimalPlace, Count
Redim Place(9) As String
Place(2) = " Thousand "
Place(3) = " Million "
Place(4) = " Billion "
Place(5) = " Trillion "
' String representation of amount.
MyNumber = Trim(Str(MyNumber))
' Position of decimal place 0 if none.
DecimalPlace = InStr(MyNumber, ".")
' Convert cents and set MyNumber to dollar amount.
If DecimalPlace > 0 Then
Cents = GetTens(Left(Mid(MyNumber, DecimalPlace + 1) & _
"00", 2))
MyNumber = Trim(Left(MyNumber, DecimalPlace - 1))
End If
I had entered a spellnumber function in Excel 2007 and it was working fine but then all the sudden it disappeared. I would prefer a function to convert numbers to text without doing visual basic code.
View 7 Replies View RelatedHow to convert a numeric value into Bulgarian words in Excel?
View 1 Replies View RelatedI am trying to enter the last name "Teh" in a cell. How do I turn off auto spell correction that turns "Teh" into "The"?
View 3 Replies View RelatedI am using the following VBA to spell numbers in arabic words ! however , the solution resulted to having the numbers spelled to ASCII codes ..
Public Function SFormatNumber(ByVal x As Double) As String
Dim Letter1, Letter2, Letter3, Letter4, Letter5, Letter6 As String
Dim C As String
[Code]....
I need to have a spell number function such that if I have a collumns with a figure and abbreviated currency as below
USD 953,681.67
EUR 953,681.67
GBP 953,681.67
The function SpellNumber would display as
US Dollars Nine Hundred and Fifty Three Thousand Six Hundred and Eighty One and Sixty Seven Cents Only
Euros Nine Hundred and Fifty Three Thousand Six Hundred and Eighty One and Sixty Seven Cents Only
Great British Pounds Nine Hundred and Fifty Three Thousand Six Hundred and Eighty One and Sixty Seven Cents Only
Any function that I can append as Macro in Excel and output depends on Currency.I should also be able to edit Macro to add additional currencies as I wish.
I am using Excel 2003.
It’s been working perfectly up until around an hour ago. However, now when I close Excel, I get compile errors.
These compile errors seem to be because Excel is trying to access controls in the workbook after it has closed. Since the workbook is closed, VBA can no longer ‘see’ the controls, and therefore it thows up errors.
I’m also getting a similar error on a Worksheets("DataExplorer").unprotect line, which seems to be because the worksheet isn’t there after closing.
These errors only occur when I close the whole excel application using the big cross in the top right. If I just close the workbook (using the smaller cross just below the big cross in the top right of excel), it doesn’t throw up these errors.
Just to clarify: all of the code runs perfectly when Excel is open. The errors are being thrown up for lines of code which run without problem until Excel is closed.
I need to know the command to close a workbook. I have used the information found here: http://www.ozgrid.com/VBA/userform-close.htm to disable closing the workbook via the upper right "X", but I need a button that, when clicked, simply closes the workbook instead.
View 2 Replies View RelatedMy company uses 4 types of barcodes 8, 12, 13, & 14 number barcodes for our products my problem is that I can't figure out how to force the barcode to format properly no matter how somebody enters it if they don't use spaces or put them in the wrong spots, I can't use custom formats because there is 4 different layouts
8 digit should be "#### ####"
12 digit should be "###### ######"
13 digit should be "# ###### ######"
14 digit should be "# ## ##### ######"
these barcodes are in columns L, M, & N also right now 'm using a formula in another cell to verify the barcodes by calculating the check digit and comparing it to the check digit typed the formula i'm using is
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
I want to have 1 check box affect 3 others in the following way: check box 1 if checked, allow check/uncheck of check boxes 2, 3, 4 if unchecked, uncheck boxes 2, 3, 4 and do not allow checking check box 1 is linked to D1 which starts with a value of false. cell E1 is if condition to have value 1 when D1 has value of true.
I have attempted to attach an example worksheet.
Test check control.xlsx
I am creating a userform with 10 checkboxes. The first 9 checkboxes are user options. I want the 10th check box to be a "Select All" option i.e. if the 10th checkbox is checked all the other 9 options are deemed to have been selected.
The way I want the display to work is that if the 10th checkbox is ticked all other checkboxes are cleared. Also if the 10th checkbox is ticked and any of the other check boxes is selected then the 10th checkbox should be selected.
I have tried coding this up but the checkboxes don't seem to operate as desired. I placed some code on the click event for the last option button to set the vlaue for all other buttons to false. This works but the 10th check box doesn't get ticked itself. When I try to code up the other bit I get similar issues.
When I press a command button I want to:
Uncheck a checkbox made with Control Toolbox
Check a particular Option Button within a group box made with the Forms Toolbar.
EDIT: Clarification, I want both things to happen when I click one button.
I want a macro that looks in range of column M to Column R if there are no consecutive blank cells.
If there is one cell who is no blank,then exit
If there are consecutive blank cells from M to R then a messagebox: One cell must be filled!
This can be done for all the rows in the sheet. (used range).
I have the following Macro setup and I would like the macro to run once the Save button is clicked.
Sub LetterCol()
Columns("C:C").Select
Selection.Copy
Range("D1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Columns("D:D").EntireColumn.AutoFit
Range("A1").Select
Application.CutCopyMode = False
Range("D1").Select
ActiveCell.FormulaR1C1 = "Letter Column"
Range("A1").Select
End Sub
I can't close out of my spreadsheet (xlsm). I press on the x in the upper right and nothing happens. I've been using the spreadsheet for a long time, but it just started happening yesterday.
View 2 Replies View Related
