I am getting #VALUE! when I use the formula to dynamically load some values to the column
simplified formula will look like below.
=IF(HLOOKUP("C",ADDRESS(ROW()-1,COLUMN(),4 ),1,FALSE)="C","C","A")
check the row above this/current column exact match if the value in that row is "C" then put "C" in this/current row and column else put "A".
example:
C
C
C
? (should be C)
A
A
A
? (should be A)
B
B
B
? (should be A)
I have a workbook full of worksheets like so:
Main
Second
Third
Fourth
The main worksheet is a roll up page of sorts. It contains all of the information on all three other tabs. All updates entered on the main sheet will be distributed accordingly to each sheet the needs it VIA hlookup. At times, certain updates will be highlighted certain colors. From what I understand, there is no way to copy the color formatting using formulas and return the value.
So, I am trying to figure out a way to use VBA for this. I have dabbled a bit in VBA have think I have found it, except I have run into a substantial road block.
I will use the .hasformula to first check all cells in a range on the other sheets. If there is a formula, it will be an Hlookup only. Once it finds the formula, it then needs to copy the color of the source cell the hlookup is using to return data. It needs to copy the color of the cell, not the color of the text.
I have a formula that looks like this:
=HLOOKUP('Output'!$B$3,'Input'!$B$1:$P$300,'Input'!$A3+1,FALSE)
It is working very fine, when the cell has a value, but when it doesn't - it will return 0. So my question is: is there any way to make it return certain value or word like "No value" instead of zero?
Can a HLOOKUP function look for a column heading in more than one 'table_array'
View 4 Replies View Relatedi'm trying to use HLookup to find an adjusted midterm grade that's given. but i have some conditions:
If student missed exam and has a zero – keep zero.
If student has a grade of 1-119 points, increase their grade 40 points.
If student has a grade of 120-125 points, increase their grade 35 points.
If student has a grade of 126-131 points, increase their grade 31 points.
If student has a grade of 132-139 points, increase their grade 27 points.
with these conditions, if my midterms grade is 120, how would i calculate it using HLookup? i worked on it but i keep getting the #NA! error.
=H4+HLOOKUP(H4,B24:D25,2).
I am trying to import a BASE ESTIMATE table into EXCEL.
I have problems with most of the formulas, especially this one:
=VLOOKUP($E$2,$B$24:$P$604,HLOOKUP($E$3,$D$22:$L$604,1)+2)*HLOOKUP(HLOOKUP($E$3,$D$22:$L$604,1),$D$2 2:$L$23,2)
and this one
=ROUND((IF(AND(OR(E7>E5,E7>E6),E3<40000),E7,IF(AND(E6<E5,E3<40000),E6,E5)))*E8*1.055*1.06,2)+10
I am not sure if EXCEL allows a HLOOKUP within an HLOOKUP. If not, how can I get around this?
Using the address function to find the exact cell of a unique string text.
I'm using the following command to find the address of a string i have in a different cell.
=ADDRESS(MATCH("*$H$1*",A:A,0),1)
The string text is in cell H1, H2, H3.......(or on another sheet). The goal is to find the address of a cell containing the unique string text from cell H1, H2, H3.....(that entire column) in a sheet with 13,000 lines. Basically, searching for a specific cell address of a string text referenced from another cell.
I need to use the ADDRESS function to define a range from which an average can be determined. My current function is as follows:
View 3 Replies View RelatedI'm trying to calc a Simple Moving Average of financial Fund data (row=fund type, column=date) on a very large matrix for a particular fund and date range. I locate the Fund of interest and retrieve the Start and End dates of interest and retrieve their addresses using the ADDRESS function. Since ADDRESS returns a text string, HOW DO I incorporate it's results into the following array function (which ignors blanks and 0 cells): {=AVERAGE(IF($L$10:$V$10>0,$L$10:$V$10,FALSE))}?
View 5 Replies View RelatedI want a function that allows me to enter a range and then returns
the address of the cell with the minimum value. It is the Address I am
interested in, not the value.
Any function to convert a long value into an IP address. I have an extract from a mySQL dbase that has the ip addresses in long format. I need to reverse them back to IP Addresses.
View 1 Replies View RelatedHow do you use the result of the "Address" function as ranges for other formulas?
I have 2 cells A1 and A2, each containing an "Address" function to find the start cell and end cell of a range.
A1 shows the result "$J$6" and A2 "$AB$6". These are working fine:
A1: =ADDRESS(ROW($A6),MATCH(HLOOKUP('cleaned up'!$I$2,pivot03!$2:$2,1,FALSE),$2:$2,0),1)
A2: =ADDRESS(ROW($A6),MATCH(HLOOKUP('cleaned up'!$I$5,pivot03!$2:$2,1,FALSE),$2:$2,0),1)
I want to get the average of this range using cells A1 and A2, but Excel treats the formula as an error: =Average(A1:A2) shows the error #DIV/0!
Going back one step and putting the formulas within cells A1 and A2 into the average formula doesn't work at all with a colon:.....................
I am trying to create a correlation matrix that uses the =ADDRESS function to define the various columns of data which I want to correlate against each other (I require this flexibility because the number of columns and rows of data to be correlated will change). The basic formula I am using is something like the following: =CORREL((ADDRESS(Sheet1!$C$2+3,L2+2,,,"Sheet1")),(ADDRESS(Sheet1!$B$2,L2+2,,,"Sheet1")))
However, while the individual ADDRESS fomulas deliver the correct start and end cell references required, it seems that CORREL function won't accept the cell addresses that result from using the =ADDRESS function.
I'm building a table that references a dynamic range on a pivot table. So far I've gotten the function to return the address on the pivot table but it wont return the value. I'm doing this so that I can both refresh the two source data sets and summarize (pivot table) and also graph these two summarized data sets since you can't graph two different pivot tables together.
This is my code so far:
Iferror - To return zero if the source data doesn't exist yet
Address - To concatenate the match functions
Match - to find the row and column numbers on sheet "B" that match the x,y call on the original sheet "A"
=IFERROR((ADDRESS((MATCH($A2,'Install Data Pivot'!$A:$A,0)),MATCH(B$1,'Install Data Pivot'!$4:$4,0),1,1)),0)
Returns $B$5 since this is the cell where the information lies.
I've tried just adding the sheet name like this...
=IFERROR('Install Data Pivot'!(ADDRESS((MATCH($A2,'Install Data Pivot'!$A:$A,0)),MATCH(B$1,'Install Data Pivot'!$4:$4,0),1,1)),0)
But that doesn't work. I've also tried using different variations of Indirect and Index but I still can't get it to reference the other sheet.
I have the below code of which I would like to addresses added to the CC list Also, Would it possible to add a range as the body? E.G:
.CCaddress = "somebody@mail.com"
.CCaddress ="somebody.else@mail.com"
Body text = Range("A1"& "" &"B1")
Code that need the above inputted:
With ActiveWorkbook
.SendMail Recipients:=Array("steve.howard@kuehne-nagel.com"), _
Subject:="610 Cambridge " & Format(Date, "yyyymmdd") & " " & "Counts"
[add cc address + body]
.Close SaveChanges:=False
End With
Is there a way to get the vlookup function to return the cell address, rather than the value, of the lookup?
View 9 Replies View RelatedI have a sheet with multiple tabs - 1 per employee. I'm trying to run an index on a select tab based on the contents of a cell in order to do a summary across all employees/tabs.
The person's name is Tulley and is listed on the summary page in cell A11. =INDEX(TULLEY!$B$4:$M$5,1,$B11) returns the correct value. I would like to replace the tab reference with the name of the person concatenated with an exclamation point. This yields TULLEY! -
INDIRECT("A11")&"!". I thought that I would be able to replace the TULLEY! in the index formula with the indirect formula. This formula returns TULLEY!, but the index function doesn't work: =INDEX(INDIRECT("A11")&"!"&$B$4:$M$5,1,$B11).
On my worksheet =ADDRESS(18+BH8-1,60,4) gives me BH21. However = SUM(BH18&":"&ADDRESS(18+BH8-1,60,4)) gives me the #VALUE! error
View 2 Replies View Relateddetermining the correct formula to lookup various details from multiple worksheet:
Data as follows:
Sheet1: input
AB1MonthSales2AUG55003MAY4000
Sheet2: Data
AB1MonthSales2JAN20003FEB25004MAR30005APR35006MAY40007JUN45008JUL50009AUG550010SEP600011OCT650012NOV700013DEC7500
b2,b3 Formula = Indirect(Address(match(a2,????,0),1,1,1,"Data"))
i dont know what is the correct range inside the match fuction to identiy the row number inside the Data sheet, i think the solution would be match(a2,Data!a2:a13,0) but things might get complicated if you have multiple worksheet such as sheet2: Data , sheet3: Data2, sheet3: Data 3
and each table has unsorted details compared to others sheets (Data vs Data 2)
I am performing a lookup using the populare user defined function nlookup, which does not take a lookuparray argument to find lookup values. But I only want to return lookup values that fall into a certain array. To accomplish this, I figured out that I need a way to specify a condition of the type "if cell address of lookup value falls within range"
It should be possible if I find a way to return the cell address of the nlookup value, but as nlookup is not limited by a lookuparray argument, so I was not able to use the address/index/match that come up in similar questions.
I am struggling to find a macro which can look at a name in column 'BT' and search it in the address book of Outlook to then place the email address of that person in column 'ED'
There are 35,000+ people in the address book and there may be over 5 email addresses for one name, so is there any way a message can appear for the user to select which email address is correct if there is more than 1 contact for that name?
Assume the following list of addresses are all in separate cells of a single column (A1-A4). I just need the formula to extract the street addresses, and then a separate formula to extract the zip codes.
5430-44 PASCHALL AVENUE PHILADELPHIA, PA 19143 OPA/BRT#: 884350845
4010 MARPLE STREET PHILADELPHIA, PA 19136 OPA/BRT#: 651087200
2618 SOUTH HOWARD STREET PHILADELPHIA, PA 19148 OPA/BRT#: 391251216
5737 WOODCREST AVENUE PHILADELPHIA, PA 19131 OPA/BRT#: 522155600
I have a list for addresses in excel in single column as shown below - aanandhi narayanan 3430 chemin de riviere sanjose,CA95148
DOMINIC ABANO 3838 GLENGROVE WAY SAN JOSE, CA 95121
abdi abdi 5390 monterey rd #6 sanjose,CA95111
Sheribel Abinsay 3212 Gateland CT San Jose, Ca 95148
I need the result to be in a way like -
3430 Chemin de riviere
San Jose
CA
95148
3838 Glengrove way
San Jose
CA
95121
5390 monterey rd#6
San Jose
CA
95111
3212 Gateland CT
San Jose
CA
95148
I have around 12000 records with the same format.
On a worksheet called "Contact Info" column A starting in row 2 I have a list of names (variable length). In Columns B2-D I need the email address, work phone number, and cell phone number.
View 5 Replies View Relatedhow can I use the cell function inside a NPV fuction as one argument of the start for the NPV string to calculate?
View 3 Replies View RelatedI am having a slight problem copying hyperlinks. I have written some code that sorts data by date and then creates a simple diary. It originally placed the name of the event in the new diary sheet. What I would like to do is instead of copying the name into this new sheet copy a hyperlink that I have created to the company's website for that event.
I can create the hyperlink using hyperlink(B1,A1) where A1 is the company name and B1 is the web address but since the new sheet will not have the underlying data I need to actually copy the values and format of the hyperlink rather than the formula.
I am facing a problem using Hlookup function. I am using Hlookup to do a control check of consolidation i am doing here, however it only returns the first found value instead of all correct values (or range).
I am attaching a file with an example. In the file formula is used in Supply(S) sheet on row 73.
Attached File : HlookupExample.xlsx‎
I have various 6 x 6 blocks which contain just numbers, in another part of the spread sheet I have a 1 x 6 block of numbers. What I need to do is to check whether any of the numbers in the 1 x 6 block appear in any of the 6 x 6 blocks.If that does occur then I want to make a specific cell increase by the times that the match happens.using HLookup but just got errors and the If Statement, although did work, went on and on and on.
View 6 Replies View RelatedIm using the following HLOOKUP formula : =HLOOKUP($B$14,$DA$15:$EH$380,2,FALSE) and I need to drag it down 365 times, but the row index num, ie ‘2’ does not increment with the drag. Is this correct – or is there a way of making the 2 increment?
View 3 Replies View RelatedI have some experience with programming, so I understand the theory behing things like loops, arrays and functions etc...Only problem is, I need to make a program at work to ease workloads and I'm afraid I have no idea where to begin.
Basically, I need something similar to a lookup, but thanks to the limit of IF statements available in the formula bar, I can't write what I need.
The program I need to write wouldbe similar to an autofill function.
On Sheet1 of my spreadsheet, there are fields:
Name, Address 1, Address 2, Address 3, Postcode, Area, Rep....
(The last three are the most important)
On sheet two, Postcode, Area, Rep already have data entered in thier respective columns. (D3, E3, F3).
What I need done on Sheet1 is when the user enters the first two characters of a postcode, the 'program' will lookup the entire row respective to the postcode that is entered. when enter is pressed, the Postcode will copy itself from the other sheet as well as the Area number and the Rep into the empty fields in Sheet1. The other way to do this is look through a long list until the right postcode for an Area is found then assign the Rep the Contact details (Add. 1, Add. 2, Add. 3...).
