Use Range Address From Cell In Index Function
Sep 15, 2007
I have a sheet with multiple tabs - 1 per employee. I'm trying to run an index on a select tab based on the contents of a cell in order to do a summary across all employees/tabs.
The person's name is Tulley and is listed on the summary page in cell A11. =INDEX(TULLEY!$B$4:$M$5,1,$B11) returns the correct value. I would like to replace the tab reference with the name of the person concatenated with an exclamation point. This yields TULLEY! -
INDIRECT("A11")&"!". I thought that I would be able to replace the TULLEY! in the index formula with the indirect formula. This formula returns TULLEY!, but the index function doesn't work: =INDEX(INDIRECT("A11")&"!"&$B$4:$M$5,1,$B11).
View 6 Replies
ADVERTISEMENT
Jul 3, 2009
I am performing a lookup using the populare user defined function nlookup, which does not take a lookuparray argument to find lookup values. But I only want to return lookup values that fall into a certain array. To accomplish this, I figured out that I need a way to specify a condition of the type "if cell address of lookup value falls within range"
It should be possible if I find a way to return the cell address of the nlookup value, but as nlookup is not limited by a lookuparray argument, so I was not able to use the address/index/match that come up in similar questions.
View 3 Replies
View Related
Jul 1, 2014
I have a data table, called Table1 in Sheet1. In a simple form it is
Customer ID
Comment
A
asdf
B
jkl;
So in VBA, I need to figure a way to give me the cell address of the matching cell in Comments. So say Customer ID starts at A1 ... that means the Comment for Customer A is B2.
How would I get that reference in VBA?
View 2 Replies
View Related
Dec 26, 2006
I am trying to create a correlation matrix that uses the =ADDRESS function to define the various columns of data which I want to correlate against each other (I require this flexibility because the number of columns and rows of data to be correlated will change). The basic formula I am using is something like the following: =CORREL((ADDRESS(Sheet1!$C$2+3,L2+2,,,"Sheet1")),(ADDRESS(Sheet1!$B$2,L2+2,,,"Sheet1")))
However, while the individual ADDRESS fomulas deliver the correct start and end cell references required, it seems that CORREL function won't accept the cell addresses that result from using the =ADDRESS function.
View 5 Replies
View Related
Mar 20, 2009
Another interesting dilemma to solve. Using this formula:
View 2 Replies
View Related
Dec 8, 2005
I want a function that allows me to enter a range and then returns
the address of the cell with the minimum value. It is the Address I am
interested in, not the value.
View 14 Replies
View Related
May 18, 2002
Is there a way to get the vlookup function to return the cell address, rather than the value, of the lookup?
View 9 Replies
View Related
May 22, 2008
how can I use the cell function inside a NPV fuction as one argument of the start for the NPV string to calculate?
View 3 Replies
View Related
Dec 3, 2013
I have a Choose function that is used to determine which range I need. e.g. =Choose(Choice,Cell,Cell,...).
In each corresponding "Choice" cell is a typed range. e.g. $B$33:$L$70
I'm looking for a way to be able to use this typed range as the range for some chart data.
View 2 Replies
View Related
Aug 25, 2006
I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
View 4 Replies
View Related
Mar 25, 2013
I've been working on a payroll program for my small biz. I'm close to done BUT...
When I use the Index Match function in a cell it works great. However I need to copy it down a column to work for pay periods going forward. When I copy it down of course it puts zeros or N/A.
Columns:
Gross Fed FICA Medicare State Net
F G H I J K
Gross is user input. FICA Medicare State and Net are simply calculated on the sheet. But to get Fed Income tax I use the Index Match function and it works perfectly. The rows increment properly with each new user input.
Code:
=INDEX(SingleWH!C$6:M$140,MATCH(G7,SingleWH!A$6:A$140,1),MATCH(E$1,SingleWH!C$4:M$4,0))
This is the code in Column F. You can see where it uses the result in Column G to look for a value in sheets("SingleWH").
My question: Fed Income tax is dependent on what the Gross is in order to look up the tables with the Index Match function. How do I get the result of the function into column G? Can I increment up Column G and ignore the zeros that dragging the function down G creates?
View 8 Replies
View Related
Apr 14, 2007
I am trying to get the cell index from a cell reference passed to a function and I have no idea how. eg. In excel
=UDF(D4,...,...,)
What I want is to get is the row and column index for cell D4, not whatever is in cell D4, so I can just click the cell in excel, and drag the formula about etc.
View 7 Replies
View Related
May 29, 2014
I'm currently using this formula:
=INDEX(B4:B64,MATCH(I5,A4:A64,0))
If I5's value is displayed more than 1 time in Column A, I want the information in Column B to appear in the same cell the formula is in in Column J
View 3 Replies
View Related
Jun 29, 2013
I want to pull the file location of a hyperlink to populate a image control in a form. I have 150 names, each with pictures. So I need to do a index,match or vlook up within the VBA and make the result the active cell. From there I know how to pull the file location out. Just need to know how to make the address of a index match result in vba.
View 5 Replies
View Related
Apr 29, 2013
I have to macros I'm working with the first take a user set range and prints the . Address to a cell.
The second Macro I'm trying to get to look at that cell and pull out the range. So is there an opposite fuction to .
Address that will convert excel format to a VBA Range format. Ex A cell with $A$1:$A$2 to Range("A1",A2")
Macro 1
Code:
For j = 1 To x
c = 1
For i = 1 To ws.Range("AD" & rc).Value
ws.Range("AE" & rc).Value = Application.InputBox
(Prompt:="What is the Heading of Data set #" & c & " Table " & tc & " This entry may repeat", Type:=8)
[Code] .........
Macro 2
Code:
'A lot of code here but I want to be able to set multiple ranges to the ranges list in the cell values.
rng(2) = sh(0).Range("AG2").Value
View 9 Replies
View Related
Jan 12, 2009
I have a variable which contains the column number. How do I then reference a range in VBA using that column number, as opposed to the letter? I know how to convert the number into the letter, but I also know there has to be something more simpler. For instance, a form of the ADDRESS function, but in VBA?
View 9 Replies
View Related
Nov 22, 2006
I want to define the range from a given cell and all data below within the same column strDataStart is the named cell in the worksheet that want to start from. Below is what I tried and failed.
Function rngDataCol(strDataStart As String) As Range
Dim rngDataEnd As Range
rngDataEnd = Range("strDataStart").End(xlDown)
rngDataCol = Range(Range("strDataStart").Address, rngDataEnd.Address)
End Function
View 5 Replies
View Related
Sep 22, 2007
I've set up a macro to create around 50 http links (sites which i need to monitor every week but whose addresses change slightly every month)
I've also got a macro to open up all these web pages at once so I can look at them in internet explorer.
When these links are nicely created into cells the http link isn't recognised straight away by excel (e.g. doesn't go blue & underlined) until i click in the cell & change or return the cell value - as part of the autocorrect function i think.
Is there a way of getting excel to automatically recognise the http links without having to go individually into every cell.
View 6 Replies
View Related
Mar 16, 2009
If a INDEX,MATCH function returns a zero, how do I get it to use the value in the adjacent cell which is a unique number?
=INDEX(Sheet2!A:C,MATCH(A2,Sheet2!A:A,0),3)
Example:
View 2 Replies
View Related
Mar 16, 2014
construct a formula that finds a value in a range , then returns the cell address of that value.
Say, i wanted to find the amount 12385 from another sheet , range C2:AA12 (contains only numbers , no duplicates). result should give me the address of that value.
I have tried the address & match function but gives me an N/A error.
View 3 Replies
View Related
Sep 28, 2007
Retrieving the address of the last cell before the FIRST blank in a range.
OK, I have searched the web through six different search engines and explored too many dead end solutions to this problem that I am nearly ready to just scrap the whole sheet.
The problem is very simple.
I need to return the address of the last cell that contains data before the FIRST blank cell.
Heck, I don’t even need to have the address, I can just index the position.
Problem is this question has been posted on nearly every excel help forum from here to pokipsy.
Unfortunately EVERY solution I have seen fails the “FIRST blank” requirement.
I have a column of data that never has blanks until the end of the data. I need to know what that cell address is in order to identify a range.
This data has a table above it and below it so none of the “dynamic range” or “Dynamic range name” solutions will work.
How do you get that address without the function continuing to the last blank cell?
View 14 Replies
View Related
Nov 12, 2013
I have a named range BGl (G1:R1). I would like to see if a cell address ($U$6) is within the columns of that range. I need a function to give me a true or false based on changing cell addresses.
View 5 Replies
View Related
Nov 14, 2007
when I use the range.find function to find a certain value in a column.. i want to return the address of the cell.. and save it in a range variable. how would I do that?
so this is what i have now.. but Rng does not return as a range.. it returns 69... when i use ctrl + G and type ?rng
set rng = .range(A:A).find(what:=69, After:=.Cells(1, 1), Searchorder:=xlByRows, searchdirection:=xlPrevious)
ok so say it picks up..... cell A69... how do i get it to save range A69
View 9 Replies
View Related
Sep 7, 2006
Let's say Cell is a cell.
How do we select this cell's column? I tried :
Cell.Column
but it doesn't work. I have an error message.
View 7 Replies
View Related
May 18, 2007
I have a list of ID's on one sheet that are also located in a large matrix on another sheet.
This macro uses the Find_Range function to find each ID within the matrix and return the column header where the ID was first located.
There is also a line which return a list of ranges, indicating all the places where the ID was found.
What I want is to convert the list of ranges into a list of corresponding column headers (ie row 1 of all columns in the range)
' Number of id's in list
RowCnt = Application.WorksheetFunction. CountA(Columns("A"))
For I = 2 To RowCnt
LookFor = Sheets("ID List").Range("A" & I)
Set InRng = Sheets("Matrix").Cells
Set Found = Find_Range(LookFor, InRng, xlValues, xlWhole)
On Error Resume Next ' If value is not found
Sheets("RateID Count").Range("C" & I) = Sheets("Matrix") _
.Cells(1, Range(Found.Address).Column) ' Return column header
Sheets("ID List").Range("D" & I) = Found.Address(False, False) ' Return cell address or range of addresses
On Error Goto 0
Next I
View 9 Replies
View Related
Sep 15, 2007
I am trying to create an XY scatter plot with multiple series. Normally, one has to manually type in or mouse-drag a range for each x series and y series. Instead I would like to build these two ranges (x and y) with text functions and place them in a cell.
For example:
A1: 'data'!$C$3:$C$10
B1: 'data'!$D$3:$D$10
Then, when I create a chart, instead of mouse-dragging, for the x-series, I'll indicate the range that's specified within Cell A1, and for the y series, that which is in B1. I would then repeat this for each series. The reason I want to do this is because I have dozens of series and dozens of graphs and it is relatively easy to programatically identify the range boundaries, but long and tedious to mouse drag them.
View 3 Replies
View Related
Jul 16, 2008
I am looking for a formula that returns the cell address of the last cell > 0 in a range.
in the example: A1CLA23 8
4546557528
the result should be A7.
View 9 Replies
View Related
Dec 12, 2012
Here is a sample of database,
A
1
Jan-12
2
Feb-12
3
Mar-12
4
Apr-12
5
May-12
6
Jun-12
7
Jul-12
8
Aug-12
9
Sep-12
10
Oct-12
11
Nov-12
12
Dec-12
If i lookup a value in the range A1:A12, say Sep-12, i need to get the cell address instead of the value of the row. but i know how to get cell address using CELL function. but i need to get cell address when i lookup the value.because lookup value will be dynamic.
View 5 Replies
View Related
Aug 18, 2007
I am setting a variable to the value of an absolute cell reference. I want to set the value of another variable to just the row value of that absolute cell reference.
View 4 Replies
View Related
May 20, 2014
Assume the following list of addresses are all in separate cells of a single column (A1-A4). I just need the formula to extract the street addresses, and then a separate formula to extract the zip codes.
5430-44 PASCHALL AVENUE PHILADELPHIA, PA 19143 OPA/BRT#: 884350845
4010 MARPLE STREET PHILADELPHIA, PA 19136 OPA/BRT#: 651087200
2618 SOUTH HOWARD STREET PHILADELPHIA, PA 19148 OPA/BRT#: 391251216
5737 WOODCREST AVENUE PHILADELPHIA, PA 19131 OPA/BRT#: 522155600
View 2 Replies
View Related
