where the first column is one continous stream on data(of variable length). what i need to do is every time the word start occurs copy down to the next start-1 and paste it to the same row is first start but over to the right ie
I am trying to create a macro that goes down Column A of my sheet and looks for a string, "Number". When it finds it, it resize (0, 14) and cuts. Then it pastes the array at an offset of (-1, 10) This is what I got so far:
Following Dave's rule regarding using the rows in Excel rather than the columns I am trying to re organise some workbooks that have been passed to me. To copy one column of information requires 4 pages of code the first section of which is below.
Sub Copy1() Sheets("INPUT_SHEET2").Select Range("F4").Select Selection.Copy Sheets("INPUT1").Select Range("C6").Select Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _ False, Transpose:=False End Sub
Now that I have the code to copy one column I want to be able to adapt it to move four columns to the right from F to J and using the example above copy from J4 to C166. I am guessing that Offset is the way to do this but can't seem to work out how. ach block of data takes up 160 rows and the data is all pasted into column C. The data to be pasted starts in row F then J then N and so on up to column IZ in some of the workbooks I am trying to revamp.
Find a specific text in my column B (example : "Proposal ID"), when "Proposal ID" is found, select this cell and offset to the column C (Offset(0, 1)). Then copy this cell value in another sheet.
This will be repeated with different texts (always in the column B), so if the text is not found, I need the macro to continue running.
using VBA and most of what i know has come from reading through blogs. I'm trying to copy 5 separate pieces of data from one row on our Payroll sheet and paste this in to another sheet call master dump.
The issue that i am having is that the code i have written keeps coming up with a run time error 1004 at the line "a.Select"
What i need the code to do is this: Copy the data from cell A4 and paste this on to another worksheet in to row cell b2, date worked in to d2, pay code in ot f2, hours in to h2 and the cost centre in to ad. all on the same row. i then need it to move on to the next team member (in this case A5) and repeat until there is no emp#. once the monday is done it will need to move onto Tuesday.
Code below.
Sub payroll_data() ' ' Payroll_data_MON Macro Dim a As Range, b As Range, c As Range, d As Range, e As Range, i As Range, j As Range, k As Range, l As Range, m As Range Set a = Range("A4") Set b = Range("I4") Set c = Range("G4") Set d = Range("H4")
My code (with help from this forum) loops through all workbooks, all sheets and all columns OK as I have tested it with message boxes
I need to take the value of Range("C5") from each column of all sheets of all workbooks and paste it to Range("A4") downwards in Workbook("Loop Folder.xls") . That is, each new value is inserted in the next row of column A.
Sub test4() ' populate analysis sheet ' copies cell("C5") from each column in each sheet in each workbook in a directory
Dim Mypath As Variant Dim excelfile As Variant
Mypath = "U:September 2006" ' folder where all excel files reside excelfile = Dir(Mypath & "*.xls")
I have a data sheet with employee information. Only one column. It prefixes information with codes, but keeps it in the same cell. I want to move data of certain types into their own columns, but the amount of data is variable, so I cannot simply move every Nth cell, etc.
So you see some employees may have different codes altogether. But I know that I want all the cells that start with 200 to be offset (-1,1), and all the cells that start with 204 to be offset (-1,2), and so on so that basically I end up with columns of info instead of a one column list.
I have been reading and studying other peoples' macros, and am just starting to grasp the basic. When I wrote my own to accomplish this, I put this together, which doesn't work. But I don't know enough to know what I don't know.
What can I add to the macro I already have in place (below) to accomplish what I'm looking for (2 parts)? ...
1) I need to copy everything (formulas) that is in C7:F7 and paste it down to all "active" rows - I'm defining an active row by any row where column A is not blank.
2) I need to copy everything (formulas) that is in Q7:AF7 and paste it down to all "active" rows - I'm defining an active row by any row where column P is not blank. (You'll notice by the screenshot that there will be blank cells in column P mixed in with non-blank cells.)
I am trying to find a macro that can search a sheet for any cell that contains the text "Not on AOI" selects a range that contains that cell, 81 rows below, and 2000 columns to the right, then cuts the selection and pastes it 162 rows below the original cell where the text was found. What's hard is that the number of columns between the "Not on AOI" cells is variable.
I'm very new to excel macros and the parts I think I've put together are:
I am having some difficulties using a combination of IF and the OFFSET function to display a range of cell values from another column based on a simple condition. The values I need to display at the destination cells should be offset by 8 columns to the right and "X" rows down from the reference column. The value "X" is to be determined via the IF function to check for the row index number.
For example, if Index value "X" = 8, then display the value of B2 in cell I9. IF X = "9", display B2 in cell I10 etc.
I have attached a sample worksheet that provides some examples.
(1) the user inputs a number into cells B2:B6 (arbitrarily shown as 3,4,3 and 2)
(2) the user then inputs a series of values into the respective columns E, G, I or K (corresponding to examples A-D, respectively) with SPACING between each value corresponding to the value entered in B2:B6.
For example, the value "4" is chosen in B3, so values are entered in column G at time = 0,4,8,12,16,20....etc
As another example, the value "3" is chosen in B4, so values are entered into column I at time = 8,11,14,17,20,23...etc, ie. the starting point is not necessarily t = 0.
(3) once the values have been entered as described in point (2) above, a series of results are automatically calculated in columns F,H,J and L.
NOTE: I have omitted the formulae for the calculation and have just entered arbitrary (color coded for clarity only-i don't need color coding!) numbers alongside each inputted value for the 4 examples A-D.
OK, so what I want to extract from the table for each example is the paired time AND result values, and then show them in a new table.
I have used an OFFSET formula (originally suggested by "daddylonglegs") to do this, and the results i GET are shown in columns O-V.
HOWEVER, what i WANT is the output as shown in columns Y-AF.
So as you will notice, there are 2 problems:
(1) Example C in columns S/T: value in cell B4 = 3, but the first value entered in column I does not start at a multiple of 3, so no values are returned in columns S/T because the offset function only uses row 6 as a reference point. What i want is the result shown in columns AC/AD.
How do i write a formula which says, "look down a column, find the first cell that has a value in it, and then offset from that cell/row" ?
(2) Example D in columns U/V: since the first input in column K starts a t = 12 (ie, cell K18), then i have 5 rows of empty space in columns U/V. What i want is the result shown in columns AE/AF.
Lastly, i should add that i am not necessarily stuck on using OFFSET function, since i keep reading that it is quite volatile.
I am trying to work out how to nest offset in a code using search replace. The goal is to find a value from cell A1 (example) and replace the values in the cells next to the cell containing samuel and the cell containing samuel.
A sort of search and remove data tool if you like So for example:
[QUOTE]A1: "samuel" (the search criteria) Search range is: B1:D400 (for example) Cell B40 = samuel C40 = Driver D40 = year
So, the macro is activated and finds "samuel" in B40 and I would like C40 & D40 replaced with "" The code I'm using is below: (this is just replacing the cell containing the search criteria with "test". I would like to nest offset(0,2) & offset(0,3).Value = ""
Sub Macro1() Range("B1:D400").Select Selection.Replace What:=Sheets("Sheet1").Range("A1").Value, Replacement:="test", LookAt:=xlPart, _ SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _ ReplaceFormat:=False End Sub
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB: Set sourceBook = Application.Workbooks.Open(sourceFilename) Set sourceSheet = sourceBook.Sheets("Current") Set targetSheet = NewBook.Sheets("Sheet2")
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet. ....is equal to "McCormick" copy row to "McCormick" spreadsheet. and so on.
Paste can this be set to default to Paste Special Values only ?
I have a sheet with a number of lists validated drop down boxes. The sheet is networked and works fine.
Problem other users as they are entering information into the required cells they are copying and pasting. Then the inevitable occurs they paste data into the wrong cells the validation from the original cell is pasted as well. Is there a way I can set paste special values only to be the default for the full sheet.
I have a macro that does lots of cutting and pasting, and to make sure it can run without interference from my normal work, I did add the line Application.Interactive = False. But seems while I am cutting and pasting in other windows while the macro runs, sometimes it crashes on the paste part. Is the macro and the Windows Operating system sharing the clipboard?
Is there a way to make the "paste" option in excel "sticky" (that is, so that you can do some other work in excel then come back and click "paste"? currently excel makes you go back and recopy then only can you paste. You cannot do anything between "copy" and "paste".
Is there a way to paste so that the cell is exactly copied? What i mean is, so that the formulas that are copied are pasted exactly as they were (without changing references)? (i get the right result when draggin and moving a cell, except that the original cell is emptied - but u get the idea). A work around is to add absolute refrences, and then take them away later - or to copy the formula in the formula bar and then paste it into another cell (one cell at a time ... )
Any way I could SUM a YTD using VLOOKUP and OFFSET? In another worksheet, I need to reference Account Income #, go to the worksheet shown below, find the Account Income number, Offset and sum of the columns in that row to the YTD figure.
