I've tried using the following (simplified) code to look up a date in a named range and return the result from the same row in the next column to the right. I can do this easily in the worksheet, but I can't write a VBA function to do it. Code:
View 2 RepliesI am receiving a run-time error with following code. The error message is "unable to get the VLookup property of the WorksheetFunction class". I only receive the message when the lookup value is not found in the table.
I thought adding the "False" command at the end would return an "N/A" but it didn't. Is there anything I can add to avoid this error?
Few hours ago, I wrote a simple procedure in order to get an average of a range of 10 cells (A1:A10). Within the code, I typed these following lines:
View 4 Replies View Relatedwhy i get this error on
myTimeToCheck = (cHour & "." & cMinute)
myColCheck = Application.WorksheetFunction.Match(myTimeToCheck, Worksheets("Sheet3").Range("A2:A87"), 0)
MsgBox (myColCheck)
it says "Unable to get the Match property of the WorksheetFunction class"
myColCheck contains 17.50 and i have 17.50 in the column A
I am trying to look at column at of two different workBOOKS and then when a match is found take the value from column D in workbook two and copy it to the corresponding row in the current column of workbook one.
this is the code I'm using and I get that unable to get the vlookup function. I thought maybe it was because not all of them will have matches so it could return an error if it is trying to return empty, so I put int on error resume next, and it ran through but never brought over ANY data, and there ARE matches and data to be brought over.
destRng is the range in the current column(that i just inserted) on the active worksheet that we will be putting the new info into. srcRng is the range in column A on the other workbook that the numbers are being compared to. src is just an integer
I have a UserForm with one ComboBox and one TextBox. The ComboBox is populated from another sheet with product codes in Col A and names in Col B. When the user selects a product code from the ComboBox the respective name appears in the adjacent TextBox. Once both boxes have been filled the user can then save the data to a third sheet. Now the problem arises when the user tries to manually enter a code into the ComboBox that does not appear in its rowsource - VBA states a run-time error and my new keyboard goes flying out the window again. Attached is an example sheet
View 4 Replies View RelatedI am trying to used match function in the code but I am getting the following error:
Run time error '1004'
Unable to get the match property of the worksheet-function class
Here is the
bool = IsError(Application.WorksheetFunction.Match(ws1.Range("D" & i) & ws1.Range("G" & i) & ws1.Range("H" & i), ws2.Range("A3:A" & LR2) & ws2.Range("B3:B" & LR2) & ws2.Range("C3:C" & LR2), 0) > 0)
I am wanting to return a boolean result for if a multi-condition match is found. In pseudocode, I want to basically determine if the value in Column D, G, and H on worksheet 1 for a given row is repeated in Columns A, B, and C on worksheet 2 in any row. I have all variables properly dimmed.
TotHCInv.Value = WorksheetFunction. Sum(KRInv, PBLInv, CRInv, PVInv)
If i >= 34 Then CPSCtphRMA.Value = WorksheetFunction.Average("G" & (i - 30) & ":G" & i)
The first line runs properly, but the second line bugs out with the error message "Unable to get the Average property of the WorksheetFunction class". I can simply do the math, but I thought that using the worksheet function would be easier than summing and dividing. I'm curious, though, as to why I can't seem to use the Average function.
what is the difference between them.
If i know how many rows there are in a column I guess i can just use MAX, right?
I have a large amount of data (10 columns X 1200+ rows). I want to copy some of the columns using the sorted names in the first column as a Match in the macro when the Matched cell (for comparison) is on a different sheet. I want to copy five (5) columns of data from the list on Sheet2 to Sheet1. The columns are B through F. I do not want to copy column A, but want to use the contents of the A column cells to determine which rows to copy.
I lock down the workbook and send it to other people and I want them to just pick a name from a drop-down list that will generate the Match cell on Sheet3 which will then populate Sheet1 with "Matched" data from Sheet2.
(I think I just confused myself.)
Part of my code is:
[code]
Sheets("Sheet2").Range("B1:F" & Application.WorksheetFunction.Match("XXXXX"),Sheets("Sheet2").Range("A:A"))).Copy Sheets("Sheet1").Range("A1")
[end code]
I want the "XXXXX" to refer to a cell on Sheet3. But I have been unable to solve the problem after trying a variety of fixes; including naming the single cell on Sheet3.
I am trying to add a small table after the last row using the data from the previous rows. I got the code workin as the following with some problems.
the result of the code below is as follows
"= countif(F4: F8," A ")"
"=countif(F5:F8," B ")"
"=countif(F6:F8," AB ")"
"=countif(F7:F8," O ")"
Herein lies a problem... I dont wish to have the values F4, F5,F6, and F7 change... rather, I want them to be constant at F5..............
I am trying to use the TREND worksheet function on a vba array. I keep getting Runtime error 1004: Unable to get the TREND property of the WorksheetFunction Class. I can bypass the error (like it were a search with no result), but I get no result of any kind from the function. My search of other threads yields nothing concrete, but causes a guess that it may have to be used on a worksheet range not a vba array. But that's not actually stated in any of the threads, and I find no documentation to that effect. Is this the issue or is it something else altogether?
Sub test()
Dim knowny As Variant
Dim knownx As Variant
Dim newx As Integer
Dim myval As Integer
knowny = Array(2, 4, 6, 8, 10)
knownx = Array(1, 2, 3, 4, 5)
newx = 6
'On Error Resume Next
myval = Application.WorksheetFunction.Trend(knowny, knownx, newx)
' 'next error, err as normal.
' On Error GoTo 0
' Err.Clear
Debug.Print myval
End Sub
does the SUMIF worksheetfunction in VBA work on Arrays? I know it will work on ranges, and thats all fine, but I am convinced it should work on an array too... for example... Just assume two columns of numbers (A and B) with 13 rows -
Public Sub test()
Dim a As Range, b As Range
Dim x, y
x = ActiveSheet.Range("A1:A13").Value
y = ActiveSheet.Range("B1:B13").Value
Set a = ActiveSheet.Range("A1:A13")
Set b = ActiveSheet.Range("B1:B13")
MsgBox Application.WorksheetFunction.Sum(x) 'works
MsgBox Application.WorksheetFunction.Sum(y) 'works
MsgBox Application.WorksheetFunction.SumIf(x, "1", y) 'wont work - "Object Required"
MsgBox Application.WorksheetFunction.SumIf(a, "1", b)
End Sub
I also tried Transposing the x and y arrays, but the same result "Object Required".
The following code does everything I need it to except for some reason it is not sending the font colour through first or the font colour is getting overwritten. I have formula in other worksheets that are counting the red and the blue to determine which rider in a team it is. For some reason the time sent to "B Grade" worksheet is ending up in black font. Can anyone explain to me why this is occuring.
I am using worksheet function.text because I am working with elapsed times that could be over 24hrs. I was wondering if the default text colour for the worksheet.text() function is black and if it could be changed.
Unable to get the Match property of the worksheetfunction class? Here is my code
View 5 Replies View RelatedI am editing macro formula... is it possible VB does calculation during code execution & return only the value to Cell. this way the formula calculation remain hidden & code will probably run faster..eg.
Range("D3").Select
ActiveCell.FormulaR1C1 = "= COUNTA(Data!C[-3])-1"
Range("D3").Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
I need to calculate & keep only value not formula in excel sheet each time the macro runs. I am getting error
Worksheets("data").Range("D3").Value = Application.CountA(Data![C:C]) - 1
I am trying to generate a number based on the Month, Year and then three digits. For Example: 1107-001. I would need it to refer to another sheet for the previous used last three digits. Each month it would start over at 001. On the Reference sheet it would always be in the first column.
View 2 Replies View RelatedI get the "Unable to get the Correl Property of the worksheetfunction class" Error when I try to run the following code
CurrentRow = 2
CurrentColumn = 2
Finalrow = 5
WS2 = Sheet2
Finalrow2 = 5
Num_Records = 4
Correlation1 = Application.WorksheetFunction.Correl(Range(Cells(CurrentRow, CurrentColumn) & ":" & Cells(Finalrow, CurrentColumn)), WS2.Range("B" & Finalrow2 - Num_Records + 1 & ":B" & Finalrow2
I am having trouble with IsError function consistently catching errors in my call to the Search worksheetfunction. For example, here is a snippet of my code that works just fine:
Code: .....
I created a workbook with three sheets, I do a vlookup formula that looks like this:=VLOOKUP(D3,Sheet3!A:D,2,FALSE)
so basically, find the value of D3 and look for the exact match in sheet 3 (column range a-d) then report back the value found in the second column.
I get an #NA error with this. Funny thing is that if I go to sheet 3, find the correct value and "re-type" it in, it will now pull the information I want.
I've tried some basic formatting changes that dont fix the issue and the only thing that seems to work is retyping the values into sheet 3.
I've got about 1500 rows I'd have to retype so the idea doesnt excite me.
If I type in the VBA Editor immediate window
Code:
?application.WorksheetFunction.average(array(1,3))
I get the expected answer of 2, but
Code:
?application.WorksheetFunction.mode(array(1,3))
produces a pop up error of:"Unable to get the Mode property of the WorksheetFunction Class"
(Excel 2010 on 64 bit machine)
Why I am getting N/A errors in sheet 1 of workbook?
For example, in sheet1, Cell B2 should equal 3. And it should stretch across the entire data range, so even something like B14 should return 3.
I want to learn VLOOKUP formula in this following problem.
VLOOKUP($A3,Sheet2!$A$2:$Q$13,$D2,0)
I am attaching the file for the same.
I am trying to run the macro and I get this error:
Compile Error! Sub or Function not defined
for the following
RFQnum = VLookup("RFQ Number", CPARSdata, 2, False) 'RFQ# should be same for each supplier
CPARSdata is a named ranged with 25 columns and 338 rows
I am using Vlookup to search for a text string in column A and storing the value of column B for more than 40 variables.
I do NOT want a macro error on Vlookup each time it can not find a match. I want to store an "error message" in that variable and move on.
countif and a rountine handler sounds like a lot of coding for each variable; can I use ISNA?
SAMPLE
Sheets("CPARS download").Select 'CPARS DOWNLOAD
RFQnum = Strings.Mid(WorksheetFunction.VLookup("RFQ Number", _
Range("CPARSdata"), 2, 0), 1, 13) 'RFQ# should be same for each supplier
' RFQnum = Mid(RFQnum, 1, 13) 'truncate the supplier code at the end
BidDue = WorksheetFunction.VLookup("Bid Due Date", Range("CPARSdata"), 2, 0)...........
I am trying to write a formula for a vlookup by product codes for a very large set of data which is then summed. My problem is that not all of the product codes are used, resulting in a large amount of #N/A errors that prevent me from being able to sum the columns.
Is there a formula that I can use to return a 0 in place of an #N/A for a vlookup?
I am struggling to figure out why my vlookup does not work, i am trying to vlookup invoice cost based on the model numbers which is in text.
I have converted the text to general but this still does brings the N/A errors, is there something else i am forgetting?.
My formula is
=IF(E2"C",0,Vlookup(D2,NUM_GAME_PACK,QUA,FALSE))
I need to replace the error with a 0.
I have written some code to perform a Vlookup for some data from another sheet but when i run the code it comes up with runtime error '438' "Object doesn't support this property or method".
Sub RAS_StockUpdate()
Dim Count As Integer
Dim SKU As Long
Dim FileName As String
FileName = ActiveWorkbook. Name
Workbooks.Open FileName:= _
"\Hwyfile1publicRange TransitionRAS DatabaseRAS_Data_Export.xls"
Windows(FileName).Activate
For Count = 1 To 100
Range("B16").Select
ActiveCell.Offset(Count - 1, 0).Select
Select Case IsNumeric(ActiveCell)
Case True...................................