I have a template whereby it show agent hourly performance. I unable to use vlookup formula because duplicate id with different interval. If I select id 1977 it will auto update agent performance it the table according to the interval.
View 9 RepliesI have two charts (Chart A and B) and 1 duplicate chart of chart A ("Chart A", didnt change the change name so remain the same).
"Chart A" is overlay above Chart B to see the actual different.
When the data is updated, interval-Y in "Chart A" is different (by +-10% offset) than Chart A which support to be the same.
At this stage, comparison is not possible.
The interval-Y is link to vb.
Checked when there is offset the maximum and minimum offset is different and else I cant find any other problem.
Do I have to state that there are two Chart A in the vb?
I have a column of "timestamp" data (in mins) which i want to filter by a given time interval, say 10 mins. Then i want to count the number of records for each time interval and output the data to a sheet. how can i achieve this? through vba?
I attached a pic illustrating what i want to accomplish.
QQ截图20140429104406.png
I want to check with the vlookup function and some other form of either index or other function where if I check (enter an ID) an ITEM ID and then it will tell me how many different products have been assigned to that ID ITEM. In some cases the ITEM ID has only used One Product, whereas other ITEM ID's have used muliple products.
I have attached an example of what I am trying to achive (its possible the same ITEM ID could have several products used against it.
I am currently busy with a material tracking sheet. The sheet tracks all the material from fabrication to being released from painters.
My problem is that in a summary sheet that I created, I used vlookup to get the exact value of the item number that was released.
Focus on Item # 043-06016
example summary.jpg
[Code] .....
This formula only gets the first value and not the 2nd value that was also released so that in my summary sheet i can get 2
example released items.jpg
I have a table simmilar to this:
Reptile Dog Red
Reptile Tiger Purple
Mammal Tiger Stripes
Mammal Tiger Spots
Mammal Racoon Black
Mammal Cat Plaid
Mammal Dog Brown
Mammal Dog Purple
Reptile Dog Red
Reptile Tiger Purple
Tree Dog Orange
Tree Pine Green
I would like to use this data to populate within a seperate worksheet that reads:
Mammal, Tiger, Stripes
Mammal, Tiger, Spots
Mammal, Dog, Brown
Mammal, Dog, Purple
Essentially pulling all of one duplicate item within a column. The problem I ran into is when I run a vlookup within the entire table, it gave me duplicates.
Basically, it gave me...
Mammal, Tiger, Stripes
Mammal, Tiger, Stripes
Mammal, Tiger, Stripes
Mammal Tiger Spots
I know this is because of the array, just forwarding to the next item, and rerunning the lookup... since Mammal is not at the top... it has to wait till the array gets to the area of "mammal".
How do I create the list, so it will not create the duplicates... like in the example I gave.
I have an interesting problem where I am trying to display a list of top ten ranked items and I have multiple items tying for a rank, creating two or more values for one rank.
I have a table that shows the ranking, numbers 1 to 10. I'm using a vlookup formula to find the rank and return the corresponding name from my data table.
The problem I have is there are two that are tied for 3rd place, so I have two ranking at three. The current table looks something like this:
1 Warren
2 Stan
3 Mike
4 #N/A
5 Dan
I can change my table so that the numbers on the left are dynamic so it will display the number 3 twice if there are multiples of the same ranking, but when I do my lookup I'm still stuck.
Is there a way to return the second "3" on the lookup? Or is there a better way to solve the issue?
Message board virgin here, but I need help with an excel issue so excuse me if I don't follow protocol.
I'm using vlookup to return the salesperson by serial number, but run into a problem when my criteria has a duplicate value, but my answers does not.
Here's my example:
Serial#, Salesperson
123 Bill
456 Bob
456 Suzy
789 Bob
Writing this workbook in 2007, but it will be used in 2003. Have searched but can't find answer to this. I have a 5-column (A to E) table array and I'm using VLOOKUP in several other cells to return values in col2, 3, 4 & 5 with my lookup value being col 1. However, col 1 will contain numbers which occur more than once. How can I get VLOOKUP (or something else?) to pick the last occurence (lowest row) and use that one? Also, the array will be sorted - smallest to largest - as the rows go down - how will the SORT work on duplicate entries? I'd like, if possible, for the entry made most recently to be the lowest of the duplicate entries so that VLOOKUP (or whatever) will pick that one to use. Will any kind of SORT do that?
View 9 Replies View RelatedI need a User Defined Function (UDF) to Vlookup duplicate values in separate Columns.
I can't use an Array function as the data is huge and it takes lot of time to calculate.
I have attached a Input and the desired output in the file attached.
UDF_MACRO.xlsx
How to get correct value using vlookup formula in duplicate look up values.
Here i mentioned a eg;
VlookUp_DuplicateValue.JPG
I have a workbook where i am trying to find duplicate accounts. I need to get a count of these duplicate accounts and i need to find the accounts as well. One last thing the workbook covers an entire year and i would like a formula that will cover the 12 sheets to provide the results.
View 4 Replies View RelatedI have used a vlookup code from a past post (Vlookup multiple values in one cell) in VBA and successfully retrieved my information to one cell.
However, I would now like to remove any duplicates in this cell; preferably while running the same code.
--vlookup code
Public Function mVLOOKUP(mlookup_value As Range, mtable_array As Range, mcol_index_num As Long)
Dim r As Range
[Code].....
I have a situation where I have about 20000 lines to populate and looking for a quicker alternative. I have duplicate numerical values in the lookup_value. I want the same number to appear for all lookup_value's but there is only one instance of that value on the other sheet I am searching. My table looks like this:
lookup_value
50058459
50058459
50058459
50058459
68594523
68594523
68594523
58965214
Table_array
Column A Column B
50058459 1234
68594523 9876
58965214 3456
I want my output of vlookup to look like this
Column A Column B
50058459 1234
50058459 1234
50058459 1234
50058459 1234
68594523 9876
68594523 9876
68594523 9876
58965214 3456
In a single column of random numbers how do I count the interval since the last occurrence of that unique number?
View 9 Replies View RelatedI have geological readings "W,X,Y & Z". For every drilled hole I have these readings recorded for individual intervals (i.e. 1-2m, 2-3m, etc.)
However, the intervals have now been grouped together based on other (unlisted) specifications.
Now I am tasked with averaging these readings "W,X,Y & Z" for the decided groupings. For example.... if intervals 1-4m have been grouped for the first hole, what is the average reading of "W,X,Y & Z" over this new interval?
I have attached a file which displays the layout of the spread. To the left is the original data, and in columns I:K are the new 'groupings' of intervals. Ideally, I would like to generate the average table to the right of the original data (highlighted in green).
So basically, I need some vba code to average the readings in the 1st table conditionally to correspond with the grouped intervals in the 2nd table.
I want to make a formula that returns a value of a interval, this value is estimated from a serial of 10 intervals with up and down value.
View 1 Replies View RelatedI want to write a macro to copy A2:A25 and paste the same range in the next blank cell upto Row no 21384. I have to do it 891 times.
View 5 Replies View RelatedI have a list of times, and I need to work out a way to establish what time interval it applies to, using a function. In production, this will be used over hundreds of entries at a time, but for the sake of example I'll cut it down to 15 times:
17:28:35
16:11:14
17:08:20
19:21:51
15:29:01
15:31:45
14:32:24
13:39:51
15:44:41
16:52:38
20:17:37
13:26:05
15:45:01
20:12:24
12:53:26
Now, there are 27 different time intervals there times can fall into:
1: 6:00 - 6:30
2: 6:30 - 7:00
3: 7:00 - 7:30
4: 7:30 - 8:00
5: 8:00 - 8:30
6: 8:30 - 9:00
7: 9:00 - 9:30
8: 9:30 - 10:00
9: 10:00 - 10:30..............
So, what I'm looking for is a formula that will match up the time to the interval. For example, it would look at 16:52:38 and output that it falls within interval 20.
I am making a spreadsheet to control my house expenses, and for that matter I would like to have the total sum of expenses for each month, but I am not quite sure how to do it.
I attached an image to better illustrate my question.
I have two persons in my household, and I use this spreadsheet to calculate how much we owe to each other.
But I would like also to know how much we spent in each month (because we both have a top budget we need to control).
I tried to use IF functions relating E8, E9, E... cells to the column A, but I had no success.
Is it possible to have Excel calculate using a fill down formula the number of days between a reoccuring value in a column? For example, I have column A formated as a DATE column containing every Wednesday and Saturday of the week for all of 2006. Column B has the value 21 in day intervals of 3, 5, 7, and 6 days. Currently, I'm counting the days (or ROWS) in between each time 21 appears manually. It would be cool if Excel can count the days in between each occurance of 21 using the DATE Data column on Column A.
View 5 Replies View RelatedI have a file that sits open all the time, and performs some refresh functions every thirty minutes. I need the file to save a copy of the tab as a CSV file at a given time interval. The code below is almost there, just need to work with the time interval part. The way it should work is to open the csv, copy / paste the active sheet; then close the csv; leaving the original excel file open. I can run it, and it works, but the time interval is not triggering.
I can get the time interval to work by itself, and the save csv part to work by itself also; I need them to work together.
VB:
Sub test()
Application.OnTime Now + TimeSerial(0, 1, 0), "test"
Dim OutputFile As Workbook, InputFile As Workbook
Dim sDD As Worksheet
[Code].....
I want to create a room reservation sheet, based on the following:
December
Room 1
Room 2
08:00 am
09:00 am
10:00 am
Where the blank cells should be filled with a color (red, blue, anything), based on another sheet that tells me i.e that the room 1 is occupied from 09:00 to 10:00 and room 2 from 08:00 to 09:00 am.
I am currently trying to sum up values every day of the week. (salaries )
That means I have a sheet called Salary where I have the entire year mapped out pr. day. Like you see underneath:
Date
30/12/13 0
31/12/13 0
01/01/130
02/01/130
03/01/130
04/01/130
05/01/130
etc.
In another sheet called Overview, I have another column divided into weeks, like this:
Date
30/12/12 0
06/01/13 0
13/01/13 0
20/01/13 0
27/01/13 0
Now what I need to do is, take the 7 days in a week in the first sheet, and summarize it in the first week in the overview sheet. Now that is simple the first time, =SUM(Salary!C1:C7)
But how do I drag down and automize it so that the next row becomes =SUM(Salary!C8:C14) instead of =SUM(Salary!C2:C8)?
So basically I need to autofill with intervals of 7 (the 7 days in the week) on every row in my Overview sheet.
How to write a formula to calculate how many minutes an agent have been in Open Time by interval ...
Example if I have open time from 9:00-10:00 I need to calculate how many minutes were used from 9:00-9:30, from 9:30-10:00 and from 10:00-10:30
What formula can I use?
I need to get the total values within a criteria. Please see attached sample file.
View 5 Replies View RelatedI have a column with intervals(every 30 min) and with some values. My problem is that if there is that if the value is 0, the interval is deleted. Is there a way(maybe macro? ) for the excel to see that an interval is missing and add it with value 0?
Attached File : intervals.xls
I have 2 columns of data (value and time):
for example:
15 4/2/08 13:00
4 4/2/08 19:00
7 4/5/08 12:00
13 4/9/08 3:00
They are continuous data. so I want to divid the value into hourly data as follows.
15 4/2/08 13:00
? 4/2/08 14:00
? 4/2/08 15:00
. .
. .
? 4/9/08 2:00
13 4/9/09 3:00
I got 2 fields A2 = Date1 and C2 = Date2
The Date1 field comes from a dropdown list using Data Validation
I want Date2 to also have a dropdown list but to be greater or equal to Date1, is this possible?
Check the following example
I'm trying to sum each months visa purchases. The data is in three columns: date,value and payment type.
I can't get this formula to work:-
{=SUM(IF(AND(Purchases!C6:C999>DATE(2009,12,28),Purchases!C6:C999<DATE(2010,1,29)),IF(Purchases!K6:K 999="Visa",Purchases!H3:H999)))}
It's returning a value of 0 (and if that were true I'd be delighted!)