Why Are Page Freeze Codes Destined To Fail?
Feb 9, 2007
When I'm manually formatting a spreadsheet I'll almost always freeze the header row for ease of navigation and to keep the headers in view. However when I attempt to do this in my code it seems no matter how careful I am it inevitably freezes the page in some peculiar location which bears no relation to the instructions I give it. Even knowing this annoying fact I'll take the extra step of turning off freeze first to clear any existing situation before setting my prefered freeze. ... and it still blows up in my face
Sheets("RTN").Select
ActiveWindow.FreezePanes = False
Range("F4").Select
ActiveWindow.FreezePanes = True
Is there any fool proof way to freeze rows?
View 9 Replies
ADVERTISEMENT
Jan 29, 2014
If I run this in the editor sometimes it works and sometimes it does not.
If I run this in editor with F8, stepping through the code, it does work.
I can only guess that enough time is passing during the F8 presses that the page can load. But is that not the purpose of adding the wait code?
[Code] ....
View 9 Replies
View Related
Jun 1, 2012
I have a macro which I recorded, then modified. The first thing it does is to freeze the top row, then it goes looking for a particular row and inserts some formulae. Nothing complicated at all.
It WAS working perfectly, but I wanted some improvements in the insertion of the formulae. I got that working just fine, but now the panes freeze in the wrong place. No matter what I do, it freezes at cell I16. I want only the top row frozen.
Found this code which was reported to work:
PHP Code:
ActiveWindow.FreezePanes = False Range("A1").Select ActiveWindow.FreezePanes = True
It still freezes at I16. I have tried shutting down Excel, and even my computer, in case it is some weird bug where something is stuck in memory.
I tried recording another macro to format some cells and also freeze the top row. Same result.
PHP Code:
Sub wraptext_top_row()'' wraptext_top_row Macro''
Rows("1:1").Select With Selection
.HorizontalAlignment = xlCenter
[Code] ..........
Same result. I tried copying the contents of the worksheet to Notepad, then into a fresh workbook, just in case there's some weird hangup in formatting that I can't see.
There is NOTHING in the original code that references that cell, or even that row or column. NOTHING. How it got hung up on that one cell I cannot fathom.
The Freeze Panes command works normally if I apply it manually. Any cell, anywhere, it works as expected.
View 1 Replies
View Related
May 5, 2006
I'm trying to convert various codes from one column of an excel spreadsheet into different codes in another column. I was able to accomplish this with "If" statements, however I'm only able to string together seven of these statements in one command. Is there a better way to add formulas for more than seven conversions? Below is a copy of what I've done so far with the seven converts:
=IF(ISNUMBER(SEARCH("WARN",J2)),"Warning",IF(ISNUMBER(SEARCH("PSSNAP",N2)),"Sales",IF(ISNUMBER(SEARCH("WARN",L2)),"Warning",IF(ISNUMBER(SEARCH("2699",L2)),"Warning",IF(ISNUMBER(SEARCH("4004",L2)),"Warning",IF(ISNUMBER(SEARCH("2036",L2)),"Warning",""))))))
I want to add about 15 more codes to convert within this formula but it's maxed out in the format I'm using.
View 3 Replies
View Related
Jun 9, 2009
When I view a sheet under Page Break Preview, it shows the Page numbers in the centre of the Page. While I am aware that it would not print the page number I was wondering if there is an option to remove/hide the page numbers.
View 3 Replies
View Related
May 3, 2009
According to what I've read so far in this forum, this will be cakewalk for you guys to find out of (or at least so I hope.. :-) I don't know much about Excel, and what I do know is just logic sense, and a bit of common math.
My problem is in a sheet I use for my personal economy. (I'm a neatfreak, and a nerd...) The logic of my sheet is that I seperate the different type of monthly expenses, and sum them individually. The way I do this is that the A Column identyfies an expense (where 1 = rent, 2 = food, 3 = gas etc) while the C column is the expense itself, Example:
A B C
On account 500
1 rent -200
2 food -20
3 gas -10
2 food -10
Sum expenses -240
On account 260
I then use this formula to discern them:
{=ABS(SUM(IF(A$4:A$30=X;C$4:C$30;0)))}............
View 3 Replies
View Related
Dec 15, 2008
I looked around the forum for a answer but none are quite the same. AA2 contains a date. AN2 contains a Pass or Fail based on =IF(AH4<60,"FAIL",IF(AJ4<60,"FAIL",IF(AL4<60,"FAIL","PASS"))).
Now even if those above fields are empty and no date is in AA2 "PASS" still shows up in AN2. I used =$AA$5="" to make AN2 turn white if AA2 had no date in it. I am unable to copy the formatting along the rest of the AN column without it all refering to just AA2. Is there a way to make it copy and correct the formating like it does with formulas? I had planned to due the same thing with the AO column that contains "DUE" if the person has not taken a test in 180 days. =IF(AA2<=(TODAY()-180),"DUE",IF(AA2<=(TODAY()-150),"CLOSE",IF(AN2="FAIL","RETEST","")))
View 5 Replies
View Related
Dec 28, 2006
My nested loop works as intended without If statements, ie it counts non blank cells in a series of 17 ranges (this loop is called the CountRangesOnEachRow loop) AND then drops down a row and repeats (this loop is called the RowNo loop). The problem is that once my first If statement occurs the RowNo loop fails and it stops at the first row.
The first If statement is designed to do the following:
1. Tests to see if A4 has data. If yes, copy cell contents (pupil's name) to Sheet(2).Range("StudentName")
2. If empty skip the countranges loop and move down a row to A5.
3. Cells A4:A35 need to be tested for data in this manner.
I've included a sample workbook & code with the IF statement comment blocked so you can see what it should do AFTER it tests the A column for data. The macro should end after row 6 as A6:A35 are all blank.
View 9 Replies
View Related
Jan 23, 2008
Consider two columns (these columns are part of UNIT TESTing workbook).. result column shows the result of test case executed on respective date
DAte Result
17/1/2008 PASS
18/1/2008 FAIL
18/1/2008 PASS
19/1/2008 FAIL
22/1/2008 PASS
22/1/2008 PASS
How do i calculate using VBA statements :
1. the number of PASSED TEST CASES that are excuted today.
2. Number of all PASSED TEst cases till yesterday.
View 3 Replies
View Related
Feb 12, 2009
I have a range of data that contains can contain either a pass or fail. what I require at the bottom of this range is a formula that says 'if any one of the range = fail then "test fail", else "test pass"'
View 2 Replies
View Related
May 7, 2014
Per the attached, I have a set of questions which must be answered by true or false. the answer to all is true. I need a pass/fail indicator on the userform to give a user realtime view based on percentage of true answers. threshold can be assumed as 80% where below it is reflected as fail
Capture_Excel Forum Query.JPG
View 6 Replies
View Related
May 12, 2014
I have a test log with PASS/FAIL. These results are logged in Excel under the column heading PASS/FAIL.
How do I count the number of PASS or FAIL using VBA macro?
So far I have tried:
[Code].....
This one did not work either:
[Code] .......
the error is at the name = Range("PASS/FAIL").Select line.
My thought process: once I had selected a range, I can now freely "look" at each string in a cell in that range. Not correct I guess.
All this is currently done in the active sheet.
View 3 Replies
View Related
Oct 15, 2009
I have one workbook that im running a userform. From this form i open another form that is contained in another previous opened workbook. On this second form i can update cell values in the second workbook. During this updating macro i am saving the workbook. using thisworkbook.save. Though For some reason when it hits this line. It must be doing a Save As and putting the workbook in mydocuments. There is nowhere in the code that references mydocuments.
Though if i open the workbook on its own (withough calling from another workbook) and load the userform the code runs fine and saves the workbook in its correct place.
View 3 Replies
View Related
Jun 23, 2009
If the addition of two cells (a1 and b1) do not add up to more than 10 then I would like cell c1 to display the word FAIL
I've tried the following
If (a1 + b1 ) < 11 then c1 = "FAIL"
But it doesn't like it
View 4 Replies
View Related
Jan 27, 2010
I have a source data tab laid out like this:
QC Date.......Policy#......Associate.......Pass/Fail......1stError.....2ndError.....3rdError
QC'ers can enter up to 3 different error types committed on a single failed policy, thus the reason for 3 error fields, even though all 3 fields offer the same value list selections (ie ErrorTypeA, ErrorTypeB, ErrorTypeC......). A policy, whether it has one error or three errors assigned, should only count as a single fail against the associate.
My problem comes into play when attempting to pivot the data. I would ideally like to see the pivot table in this format:
(filter)Associate
(filter)QC Date
...
ErrorTypeA.......Count
ErrorTypeB.......Count
ErrorTypeC.......Count
ErrorTypeD.......Count
Where the "count" is the total number of occurances of that error type across all three error fields - 1stError, 2ndError, 3rdError.
But since 1st/2nd/3rd error fields are different columns, I am unable to do a single count.
My pivot ends up looking something like this:
1stError.....ErrorTypeA.......Count
1stError.....ErrorTypeB.......Count
1stError.....ErrorTypeC.......Count
1stError.....ErrorTypeD.......Count
Then repeated for the 2ndError and 3rdError fields.
View 4 Replies
View Related
Aug 20, 2012
It's a worksheet for testing milk tanks. The issue is as follows:
Column F = Chart Error/This can be either a positive or negative whole number
Column G = Tolerance/This is always a whole positive number
Problem is I want Column H = Status to say "Pass" or "Fail" based on meeting the Column G number. But it's only the number itself (not whether it's Positive or Negative) that matters in determining the P/F status.
Examples:
Column F= -20
Column G= 15
Column H= Fails
or
F= 20
G= 15
H= Fails
The formulas I've been coming up with will show one or the other as Failing but not both + or - numbers if they fail to meet the G Column tolerance number.
View 6 Replies
View Related
Oct 16, 2007
I am going to use excel for test cases. I can creat a drop down list with the selections "pass", "fail", "not run". That isn't a problem using the data validation toolbar. However I would like to basically color the cell (test case) with a certain color based on the drop down selection.
for instance:
Pass = Green
Fail = Red
Not run = Orange.
View 9 Replies
View Related
Apr 3, 2009
I am using the below code to locate the last column in various worksheets before pasting information. The problem is the column selected is either: Correct, Is a blank column with many blank columns in between it and the last visible text. The code also highlights all the cells containing text in some sheets. The results are the same for each sheet the code is run in i.e it is not varying.
View 4 Replies
View Related
May 18, 2006
I have some code that parses an html table. I want to put in error handling in case the format of the page changes or the internet page is unavailable. I am testing without an internet connection and the run time error is not being branched off to the error handler and is fatally ending the macro. This is true also if I raise an error manually.
Private Sub ParseInjuryPage()
On Error Goto ErrorHandl
Dim strPage As String
Dim webIE As SHDocVw.InternetExplorer
Dim myURL As String
Dim tableBeg As Long
Dim tableEnd As Long
Dim RowBeg As Long
Dim rowEnd As Long
Dim cellBeg As Long
Dim cellEnd As Long
Dim strBeg As Long
Dim strEnd As Long
Dim myCell As Range
Dim rowNum As Integer
With Sheets("INJ")
Set myCell = .Range("A2")
.Range("A:F").Value = vbNullString
rowNum = 2
Set webIE = New SHDocVw.InternetExplorer
myURL = "http://www.sportsline.com/nfl/injuries"
webIE.Navigate myURL
Do Until webIE.ReadyState = READYSTATE_COMPLETE
DoEvents
Loop
strPage = webIE.Document.body.innerhtml...................................
View 6 Replies
View Related
Mar 26, 2006
I suddenly can't adjust my page breaks in any Excel spreadsheet while in Page Break Preview. Is there some option to turn it on and off?
View 7 Replies
View Related
Oct 16, 2013
I have a sheet that changes the number of columns based on data from other sheets. This is the only sheet in the workbook that I will print out every day. I have it set right now to fit all columns on one page, however sometimes this will result in the bottom 1/3rd of the sheet not being used. If I use fit all rows on one page, then some of the columns will get cut off. Is there a way to scale in both directions? My guess is there is not, but I thought I would ask because it would work great for me if I could.
View 4 Replies
View Related
May 21, 2009
I have a report that I use and right now I have a command button that prints the report x2. What I would like to do is to have it print one in color and one in grayscale. I could do this I think with two different buttons, but I would like to utilize just one. I tried creating a macro but it did not pick up the fact that I changed the properties to black and white.
View 2 Replies
View Related
May 1, 2009
I am looking for a formula that will take data from one page and graph it on another page. The data I am trying to graph is arranged like so:
A B
1 q 2009.05.01
2 w 2009.05.02
3 w 2009.05.01
4 q 2009.05.01
I am looking for something that will look at column A and if the answer is "q" and then look at column B and if the answer is "2009.05.01" Excel will take that and count it in a specific cell on another page. In the case above, I want Excel to give me the answer of "2" in a designated cell.
View 3 Replies
View Related
Jul 23, 2006
Is it possible to Change Start Page Of Multi Page UserForm Based on 8 CommandButtons. on a WorkSheet, for example.
CommandButton1
UserForm1.MultiPage1.Value = 0
CommandButton2
UserForm1.MultiPage1.Value = 1
CommandButton3
UserForm1.MultiPage1.Value = 2
CommandButton4
UserForm1.MultiPage1.Value = 3
Could I use 1 multipage UserForm Instead of 8 UserFoms. Is it better to use 1 multipage UserForm with 8 pages or 8 UserForms. I dont know if this make sense or not?
View 2 Replies
View Related
Mar 15, 2007
I have a workbook that has 9 different tabs in it. Once all the information has been completed throughout the workbook, is there a code that could transfer specific data on each page to a different colum on that same page? I need to do this for 9 pages at one time. The information is listed differently on each page. I need to transfer data from the current data column to the previous data column once the entire workbook has been filed out.
View 2 Replies
View Related
May 18, 2007
how to get rid of the page numbers that appear when using page break preview mode. The page numbers appear in large grey font in the middle of each page and sometimes makes it difficult to read cells. Can I use this view with all the same functionality without that one feature?
View 3 Replies
View Related
Jun 29, 2007
I need a macro that will print a hidden page that is linked to the page I have active.
It needs to be able to find the correct hidden page that corresponds to the active page because there are multilple pairs of the hidden/visible pages. The name of the hidden page is the same as the visible one with "printout" added to the end. When created, the sheet code names are sheetn and sheetm; n and m being consecutive numbers.
View 3 Replies
View Related
Nov 4, 2008
Working with 2000 Excel is bringing some new chalanges. I see things are done different. I am trying now to keep my header to repeat from page to page.
For example I have a header that may say something like:
People, numbers, date, ect. And there are so many new rows they go on for pages long. How can I keep my header on the top of each page when it prints out on paper.
View 5 Replies
View Related
Mar 27, 2009
Assume that calculation is set to automatic and not manual, then is every formula on a page updated when any value on the page is changed, or only when the values in the cells pertaining to a particular formula change?
For instance, if cells a1-a10 have values and in a11 is a sum a1-a10 formula, and in b1-b10 are values and a sum b1-b10 formula in b11, if I change a value in range b1-b10 but do not change any values in a1-a10,then as well as the formula in b11 updating will the formula in a11 recalculate or does excel keep track of which cells have changed and thus is aware that the formula in a11 does not need to be recalculated?
View 3 Replies
View Related
Oct 17, 2008
I have a dataset that is as follows:
Col1 2 3 4 ...... 45
123 456 xxx xxx xxx
100 234 xxx xxx xxx
221 543 xxx xxx xxx
112 234
112 689
122 956
122 234
This goes on from left to right for 45 odd columns.
I need to copy each set i.e set 1 is 123 down to 122 to say cell a25 and then copy the next set i.e. 456 to 234 below the first set.
I need to somehow write a loop code that knows where to get the 2nd, then 3rd set, etc and copy it to the bottom of the preceeding set
View 9 Replies
View Related
