If Statement Causing Loop To Fail

Dec 28, 2006

My nested loop works as intended without If statements, ie it counts non blank cells in a series of 17 ranges (this loop is called the CountRangesOnEachRow loop) AND then drops down a row and repeats (this loop is called the RowNo loop). The problem is that once my first If statement occurs the RowNo loop fails and it stops at the first row.

The first If statement is designed to do the following:

1. Tests to see if A4 has data. If yes, copy cell contents (pupil's name) to Sheet(2).Range("StudentName")
2. If empty skip the countranges loop and move down a row to A5.
3. Cells A4:A35 need to be tested for data in this manner.

I've included a sample workbook & code with the IF statement comment blocked so you can see what it should do AFTER it tests the A column for data. The macro should end after row 6 as A6:A35 are all blank.

View 9 Replies


ADVERTISEMENT

Invisible Data?? Causing Locate Blank Column Vba To Fail

Apr 3, 2009

I am using the below code to locate the last column in various worksheets before pasting information. The problem is the column selected is either: Correct, Is a blank column with many blank columns in between it and the last visible text. The code also highlights all the cells containing text in some sheets. The results are the same for each sheet the code is run in i.e it is not varying.

View 4 Replies View Related

Use IF Statement In DO WHILE Loop

May 18, 2009

I have the following loop that should look through my rows of data for the Value "Y" in column T, for those rows that contain "Y" it should update column K with the variable xdate. For some reason it doesn't seem to work, it changes the first entry it finds and then seems to crash, I have to use CTRL+BREAK to stop it.

View 3 Replies View Related

Using MID On Range In For Each Loop With IF Statement?

Aug 8, 2013

I am trying to loop through a range, checking for a cell to contain one of two characters and then put a value in a cell to the side (well 3 away) of it. Im getting an error for Type mismatch on line:

VB:
If CellContent = "h" Or "v" Then

the data in the cell is an along the lines of '12.34.56.43 som-thi-vh-ng1'

VB:
Dim MyRange, MyCell As Range
Dim CellContent As String
Sheets("Sheet1").Activate

[Code]....

View 1 Replies View Related

How Can I Use An IF Statement To Loop LINEST

Sep 2, 2008

how to get my LINEST function to work properly. Now, what I'd like to do is have it reduce or increase the order of the polynomial until R^2 equals 1.0, or the polynomial reaches 6th order, whichever comes first.

Can I do this with a bunch of nested IF ELSEIF statements, or is there a cleaner way to do this?

View 12 Replies View Related

How To Input If Statement In For Loop

Jul 31, 2013

I have a code like this below

Sub Copydata()
Dim emre As Integer
For emre = 100 To 121
Sheets("CP TB").Select
ActiveSheet.Range("$B$8:$G$10000").AutoFilter Field:=3, Criteria1:=emre
Range("E8:F8").Select

[Code] .....

I want to skip values when the selection is a value I choose. I tried to put a "If" statement but I couldn't make it work.

The IF statement will check the selection after red colored code. if cell value is "a" then it will go for Next emre.

View 6 Replies View Related

Getting Error For For Each Loop With If Statement

Nov 9, 2013

I am getting the Run-time error '380'. Could not set the value propery. Invalid property value.

I have a user form for data entry purpose which is working fine. Now, I am making a code for data editing purpose which pulls out data from the worksheet into the user form.

I am able to do this for text boxes and combo boxes that are not linked with each other. However I am getting a problem in the following case; I have a combo box and a text box that are linked to each other by combo box _change code which is below which may be the reason for the error I am getting for the next code...

Code:
Private Sub cmbColor_Change()
If cmbColor.Value = "Other" Then
lblColor.Visible = True

[Code]....

View 6 Replies View Related

Do While Loop Statement Not Performing

Aug 5, 2008

I have the following code which previously was showing an error on the Do While line. It was suggested that I change the line too Range("B2").Text. However, the loop is not deleting the rows based on "#N/A". Can anyone offer any suggestions?

Selection.Sort Key1:=Range("B2"), Order1:=xlAscending, Header:=xlGuess .....

View 9 Replies View Related

A Write Statement With A For Loop

Jun 15, 2007

So here is my problem:

how do you repeat a write statement four time

form 1234 to 1234123412341234

View 3 Replies View Related

Call Statement In Loop Only Once

Oct 16, 2007

If ComboBox1.Text = " Market 1" Then
StoreNumList = Array ("66", "67", "107", "222") 'obviously array string is much longer than this
For x = LBound(StoreNumList) To UBound (StoreNumList)
StoreNum = StoreNumList(x)
ComboBox1.value = StoreNum
Call btnOK_Click_Process
Next x

Program runs fine first step through. It calls the btnOK_Click_Process sub routine just fine. However on second and subsequent For/Next cycles it does not call btnOK_Click_Process.

View 9 Replies View Related

Excel 2007 :: Do Loop With IF Statement

Nov 12, 2013

I am having an issue getting an IF statement to work inside a DO loop. I have Microsoft Excel 2007 and Windows 7 Entreprise.

In my Excel spreadsheet, I have in column B a list of keywords and in column C the category to which each keyword belongs. For instance, the keyword "boot" goes withe the category "Shoes", "scarf" goes in "Accessories", etc.

In another column, I have a list of product descriptions (like "Black Boots" or "Silk Scarf") and I would like to assign the relevant category to each product. I thought to do this by creating a new function in VBA. This function would go through the whole list of keywords in column B, checking if the keyword is included in the product description. If it is, the function's result would be the relevant category, and if it is not, the function would search the next line in column B, until a relevant keyword is found, or until the end of the list.

Here is the code I have written so far:

Code:
Function SegmentSearch(Item)
Dim i As Integer
i = 1
Do
i = i + 1

If Application.WorksheetFunction.IsNumber(Application.WorksheetFunction.Search(Sheet5.Cells(i, 2), Item)) = "TRUE" Then SegmentSearch = Cells(i, 3)
Loop Until Application.WorksheetFunction.IsNumber(Application.WorksheetFunction.Search(Sheet5.Cells(i, 2), Item)) = "TRUE"
End Function

Without the loop, the function works fine (if "Item" happens to include the first keyword in the list) but as soon as I try putting the loop I get a #VALUE! error.

View 7 Replies View Related

Setting Value In For Each Statement Stars Infinite Loop

Sep 17, 2009

Setting value in For Each statement stars infinite loop. I am trying to get the following script to work

View 2 Replies View Related

Nested Next Loop: Evaluate The If Statement Below Over A Range Of Cells

Aug 22, 2008

I think the problem is the order in which I have the "next" loops. I would like to evaluate the if statement below over a range of cells

Sub Analysis()

Dim i As Integer
Dim x As Integer
Dim y As Integer
Dim k As Integer
Dim TheLast As Integer

TheLast = Sheets("Name").Range("c" & Rows.Count).End(xlUp).Row

For i = -7 To -26 Step -1
For x = 24 To 43
For y = 14 To 43
For k = 16 To TheLast.................

View 9 Replies View Related

Several Formulas In One Cell + Logic Fail

May 3, 2009

According to what I've read so far in this forum, this will be cakewalk for you guys to find out of (or at least so I hope.. :-) I don't know much about Excel, and what I do know is just logic sense, and a bit of common math.

My problem is in a sheet I use for my personal economy. (I'm a neatfreak, and a nerd...) The logic of my sheet is that I seperate the different type of monthly expenses, and sum them individually. The way I do this is that the A Column identyfies an expense (where 1 = rent, 2 = food, 3 = gas etc) while the C column is the expense itself, Example:

A B C
On account 500
1 rent -200
2 food -20
3 gas -10
2 food -10
Sum expenses -240
On account 260

I then use this formula to discern them:
{=ABS(SUM(IF(A$4:A$30=X;C$4:C$30;0)))}............

View 3 Replies View Related

Why (Wait For Page To Load) Fail

Jan 29, 2014

If I run this in the editor sometimes it works and sometimes it does not.
If I run this in editor with F8, stepping through the code, it does work.

I can only guess that enough time is passing during the F8 presses that the page can load. But is that not the purpose of adding the wait code?

[Code] ....

View 9 Replies View Related

Conditional Formating Pass Or Fail

Dec 15, 2008

I looked around the forum for a answer but none are quite the same. AA2 contains a date. AN2 contains a Pass or Fail based on =IF(AH4<60,"FAIL",IF(AJ4<60,"FAIL",IF(AL4<60,"FAIL","PASS"))).

Now even if those above fields are empty and no date is in AA2 "PASS" still shows up in AN2. I used =$AA$5="" to make AN2 turn white if AA2 had no date in it. I am unable to copy the formatting along the rest of the AN column without it all refering to just AA2. Is there a way to make it copy and correct the formating like it does with formulas? I had planned to due the same thing with the AO column that contains "DUE" if the person has not taken a test in 180 days. =IF(AA2<=(TODAY()-180),"DUE",IF(AA2<=(TODAY()-150),"CLOSE",IF(AN2="FAIL","RETEST","")))

View 5 Replies View Related

Summary Of Pass/Fail By Date

Jan 23, 2008

Consider two columns (these columns are part of UNIT TESTing workbook).. result column shows the result of test case executed on respective date

DAte Result

17/1/2008 PASS
18/1/2008 FAIL
18/1/2008 PASS
19/1/2008 FAIL
22/1/2008 PASS
22/1/2008 PASS

How do i calculate using VBA statements :

1. the number of PASSED TEST CASES that are excuted today.

2. Number of all PASSED TEst cases till yesterday.

View 3 Replies View Related

If Range Contains: Range = Fail Then "test Fail", Else "test Pass"

Feb 12, 2009

I have a range of data that contains can contain either a pass or fail. what I require at the bottom of this range is a formula that says 'if any one of the range = fail then "test fail", else "test pass"'

View 2 Replies View Related

VBA Status Of Pass / Fail Required On Userform

May 7, 2014

Per the attached, I have a set of questions which must be answered by true or false. the answer to all is true. I need a pass/fail indicator on the userform to give a user realtime view based on percentage of true answers. threshold can be assumed as 80% where below it is reflected as fail

Capture_Excel Forum Query.JPG

View 6 Replies View Related

How To Count PASS / FAIL Cells In A Range

May 12, 2014

I have a test log with PASS/FAIL. These results are logged in Excel under the column heading PASS/FAIL.

How do I count the number of PASS or FAIL using VBA macro?

So far I have tried:

[Code].....


This one did not work either:

[Code] .......

the error is at the name = Range("PASS/FAIL").Select line.

My thought process: once I had selected a range, I can now freely "look" at each string in a cell in that range. Not correct I guess.

All this is currently done in the active sheet.

View 3 Replies View Related

Reference Workbook Save Fail (mydocuments)

Oct 15, 2009

I have one workbook that im running a userform. From this form i open another form that is contained in another previous opened workbook. On this second form i can update cell values in the second workbook. During this updating macro i am saving the workbook. using thisworkbook.save. Though For some reason when it hits this line. It must be doing a Save As and putting the workbook in mydocuments. There is nowhere in the code that references mydocuments.

Though if i open the workbook on its own (withough calling from another workbook) and load the userform the code runs fine and saves the workbook in its correct place.

View 3 Replies View Related

Why Are Page Freeze Codes Destined To Fail?

Feb 9, 2007

When I'm manually formatting a spreadsheet I'll almost always freeze the header row for ease of navigation and to keep the headers in view. However when I attempt to do this in my code it seems no matter how careful I am it inevitably freezes the page in some peculiar location which bears no relation to the instructions I give it. Even knowing this annoying fact I'll take the extra step of turning off freeze first to clear any existing situation before setting my prefered freeze. ... and it still blows up in my face

Sheets("RTN").Select
ActiveWindow.FreezePanes = False
Range("F4").Select
ActiveWindow.FreezePanes = True
Is there any fool proof way to freeze rows?

View 9 Replies View Related

IF Formula Syntax (cell To Display The Word FAIL)

Jun 23, 2009

If the addition of two cells (a1 and b1) do not add up to more than 10 then I would like cell c1 to display the word FAIL

I've tried the following

If (a1 + b1 ) < 11 then c1 = "FAIL"

But it doesn't like it

View 4 Replies View Related

Pivot Table (count As A Single Fail Against The Associate)

Jan 27, 2010

I have a source data tab laid out like this:

QC Date.......Policy#......Associate.......Pass/Fail......1stError.....2ndError.....3rdError

QC'ers can enter up to 3 different error types committed on a single failed policy, thus the reason for 3 error fields, even though all 3 fields offer the same value list selections (ie ErrorTypeA, ErrorTypeB, ErrorTypeC......). A policy, whether it has one error or three errors assigned, should only count as a single fail against the associate.

My problem comes into play when attempting to pivot the data. I would ideally like to see the pivot table in this format:

(filter)Associate
(filter)QC Date
...
ErrorTypeA.......Count
ErrorTypeB.......Count
ErrorTypeC.......Count
ErrorTypeD.......Count

Where the "count" is the total number of occurances of that error type across all three error fields - 1stError, 2ndError, 3rdError.

But since 1st/2nd/3rd error fields are different columns, I am unable to do a single count.

My pivot ends up looking something like this:

1stError.....ErrorTypeA.......Count
1stError.....ErrorTypeB.......Count
1stError.....ErrorTypeC.......Count
1stError.....ErrorTypeD.......Count
Then repeated for the 2ndError and 3rdError fields.

View 4 Replies View Related

Pass Or Fail Using Both Positive And Negative Numbers Against Tolerance

Aug 20, 2012

It's a worksheet for testing milk tanks. The issue is as follows:

Column F = Chart Error/This can be either a positive or negative whole number
Column G = Tolerance/This is always a whole positive number

Problem is I want Column H = Status to say "Pass" or "Fail" based on meeting the Column G number. But it's only the number itself (not whether it's Positive or Negative) that matters in determining the P/F status.

Examples:

Column F= -20
Column G= 15
Column H= Fails

or

F= 20
G= 15
H= Fails

The formulas I've been coming up with will show one or the other as Failing but not both + or - numbers if they fail to meet the G Column tolerance number.

View 6 Replies View Related

Creating A Dropdown List With Pass/Fail With Colors

Oct 16, 2007

I am going to use excel for test cases. I can creat a drop down list with the selections "pass", "fail", "not run". That isn't a problem using the data validation toolbar. However I would like to basically color the cell (test case) with a certain color based on the drop down selection.

for instance:

Pass = Green
Fail = Red
Not run = Orange.

View 9 Replies View Related

Need First Statement To Loop Until "False"

Jul 27, 2009

I have a worksheet built that obtains info from Sheet1(ACV) and enters it into Sheet2(Payment1), however when I run the process, only Line 10 fills and then it stops. I need to loop the first statement of the code, so that it fills all of column 1 until there is no info to fill then I assume the rest of the code will fill in the worksheet accordingly.

View 3 Replies View Related

INDEX, IF With AND Causing #NUM! Error

Mar 10, 2009

My formula to add a row to a worksheet worked fine, except for the fact that it was including items with 0%. I need items with >0% but <=50%.

Here's the code that sorta works...

View 6 Replies View Related

Using Backspace Key Causing Error

Mar 10, 2014

why the following code generates an error if I use the backspace key to clear the textbox?

Code:
Dim t As Date
If Len(Controls.Item("txtstart").Value) = 4 Then
On Error Resume Next
t = TimeSerial(Left(Controls.Item("txtstart").Value, 2), Right(Controls.Item("txtstart").Value, 2), 0)
On Error GoTo 0
ElseIf Len(Controls.Item("txtstart").Value) = 5 Then
On Error Resume Next

[code]....

View 9 Replies View Related

VBA Causing Excel To Crash?

Apr 15, 2014

I have a piece of code in one of my Macro's, if I run the macro and don't let this piece of code run everything works fine, when I let this piece of code execute the excel file keeps running until I go to save, at which point I get a message saying "Microsoft office excel has encountered a problem and needs to close. We are sorry for any inconvenience".

Code is as follows:

If MsgBox("Copy and hardcode this scenario?", vbYesNo) = vbYes Then
Calculate
Application.DisplayAlerts = False

[Code]....

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved