Copying 12 Months Data Across The Page To Down The Page

Oct 17, 2008

I have a dataset that is as follows:

Col1 2 3 4 ...... 45

123 456 xxx xxx xxx
100 234 xxx xxx xxx
221 543 xxx xxx xxx
112 234
112 689
122 956
122 234

This goes on from left to right for 45 odd columns.

I need to copy each set i.e set 1 is 123 down to 122 to say cell a25 and then copy the next set i.e. 456 to 234 below the first set.

I need to somehow write a loop code that knows where to get the 2nd, then 3rd set, etc and copy it to the bottom of the preceeding set

View 9 Replies


ADVERTISEMENT

Page Break Preview It Shows The Page Numbers In The Centre Of The Page

Jun 9, 2009

When I view a sheet under Page Break Preview, it shows the Page numbers in the centre of the Page. While I am aware that it would not print the page number I was wondering if there is an option to remove/hide the page numbers.

View 3 Replies View Related

Copying Only Cells With Data To New Page?

Oct 7, 2013

I have line of code that should look bat a given range and copy all visible cells to a new sheet, to start at G8. I get the message that this code doesn't perform this for more than one selection and I'm not sure my code is correct for a rnage that covers two lines either.

VB:
Sheets("Error recommendations").Select
' On Error GoTo Errorhandler ...

View 3 Replies View Related

Countif Formula: Take Data From One Page And Graph It On Another Page

May 1, 2009

I am looking for a formula that will take data from one page and graph it on another page. The data I am trying to graph is arranged like so:

A B

1 q 2009.05.01
2 w 2009.05.02
3 w 2009.05.01
4 q 2009.05.01

I am looking for something that will look at column A and if the answer is "q" and then look at column B and if the answer is "2009.05.01" Excel will take that and count it in a specific cell on another page. In the case above, I want Excel to give me the answer of "2" in a designated cell.

View 3 Replies View Related

Transfer Specific Data On Each Page To A Different Colum On That Same Page

Mar 15, 2007

I have a workbook that has 9 different tabs in it. Once all the information has been completed throughout the workbook, is there a code that could transfer specific data on each page to a different colum on that same page? I need to do this for 9 pages at one time. The information is listed differently on each page. I need to transfer data from the current data column to the previous data column once the entire workbook has been filed out.

View 2 Replies View Related

Filtering Data And Copying The Rows Back To The Summary Page

Feb 4, 2014

I have a spreadsheet of raw data that has been downloaded in Excel. In Column N there are different site numbers.

I want to use a new Sheet for each site. Using a formulae I want to filter the data for each site and then copy the entire row to the relevant site`s page.

So I should end up with a sheet for each page and allthe data sorted correctly?

View 3 Replies View Related

Put In Error Handling In Case The Format Of The Page Changes Or The Internet Page Is Unavailable

May 18, 2006

I have some code that parses an html table. I want to put in error handling in case the format of the page changes or the internet page is unavailable. I am testing without an internet connection and the run time error is not being branched off to the error handler and is fatally ending the macro. This is true also if I raise an error manually.

Private Sub ParseInjuryPage()
On Error Goto ErrorHandl
Dim strPage As String
Dim webIE As SHDocVw.InternetExplorer
Dim myURL As String
Dim tableBeg As Long
Dim tableEnd As Long
Dim RowBeg As Long
Dim rowEnd As Long
Dim cellBeg As Long
Dim cellEnd As Long
Dim strBeg As Long
Dim strEnd As Long
Dim myCell As Range
Dim rowNum As Integer
With Sheets("INJ")
Set myCell = .Range("A2")
.Range("A:F").Value = vbNullString
rowNum = 2
Set webIE = New SHDocVw.InternetExplorer
myURL = "http://www.sportsline.com/nfl/injuries"
webIE.Navigate myURL
Do Until webIE.ReadyState = READYSTATE_COMPLETE
DoEvents
Loop
strPage = webIE.Document.body.innerhtml...................................

View 6 Replies View Related

Can't Move Page Breaks In Page Break Preview

Mar 26, 2006

I suddenly can't adjust my page breaks in any Excel spreadsheet while in Page Break Preview. Is there some option to turn it on and off?

View 7 Replies View Related

Print To Fit All Rows And Column On One Page And Take Up Entire Page?

Oct 16, 2013

I have a sheet that changes the number of columns based on data from other sheets. This is the only sheet in the workbook that I will print out every day. I have it set right now to fit all columns on one page, however sometimes this will result in the bottom 1/3rd of the sheet not being used. If I use fit all rows on one page, then some of the columns will get cut off. Is there a way to scale in both directions? My guess is there is not, but I thought I would ask because it would work great for me if I could.

View 4 Replies View Related

Printing One Page Grayscale And One Page Color With Code

May 21, 2009

I have a report that I use and right now I have a command button that prints the report x2. What I would like to do is to have it print one in color and one in grayscale. I could do this I think with two different buttons, but I would like to utilize just one. I tried creating a macro but it did not pick up the fact that I changed the properties to black and white.

View 2 Replies View Related

Change Start Page Of Multi Page UserForm

Jul 23, 2006

Is it possible to Change Start Page Of Multi Page UserForm Based on 8 CommandButtons. on a WorkSheet, for example.

CommandButton1
UserForm1.MultiPage1.Value = 0
CommandButton2
UserForm1.MultiPage1.Value = 1
CommandButton3
UserForm1.MultiPage1.Value = 2
CommandButton4
UserForm1.MultiPage1.Value = 3

Could I use 1 multipage UserForm Instead of 8 UserFoms. Is it better to use 1 multipage UserForm with 8 pages or 8 UserForms. I dont know if this make sense or not?

View 2 Replies View Related

Remove Page Numbers In Page Break Preview

May 18, 2007

how to get rid of the page numbers that appear when using page break preview mode. The page numbers appear in large grey font in the middle of each page and sometimes makes it difficult to read cells. Can I use this view with all the same functionality without that one feature?

View 3 Replies View Related

Macro To Print Page Based On Active Page

Jun 29, 2007

I need a macro that will print a hidden page that is linked to the page I have active.

It needs to be able to find the correct hidden page that corresponds to the active page because there are multilple pairs of the hidden/visible pages. The name of the hidden page is the same as the visible one with "printout" added to the end. When created, the sheet code names are sheetn and sheetm; n and m being consecutive numbers.

View 3 Replies View Related

Wondering How To Keep Headers Repeating From Page To Page.

Nov 4, 2008

Working with 2000 Excel is bringing some new chalanges. I see things are done different. I am trying now to keep my header to repeat from page to page.

For example I have a header that may say something like:
People, numbers, date, ect. And there are so many new rows they go on for pages long. How can I keep my header on the top of each page when it prints out on paper.

View 5 Replies View Related

Formula On A Page Updated When Any Value On The Page Is Changed

Mar 27, 2009

Assume that calculation is set to automatic and not manual, then is every formula on a page updated when any value on the page is changed, or only when the values in the cells pertaining to a particular formula change?

For instance, if cells a1-a10 have values and in a11 is a sum a1-a10 formula, and in b1-b10 are values and a sum b1-b10 formula in b11, if I change a value in range b1-b10 but do not change any values in a1-a10,then as well as the formula in b11 updating will the formula in a11 recalculate or does excel keep track of which cells have changed and thus is aware that the formula in a11 does not need to be recalculated?

View 3 Replies View Related

Numerically Sorting Columns And Copying To Separate Page

Dec 19, 2012

I am working on an excel spreadsheet that has multiple "sheets" to it. On the first sheet I have multiple columns worth of info and on the second sheet I am trying to copy some of the info from the first sheet.

For example:

Sheet 1, Column A2 has the number 1 in it.

On sheet 2 I have entered the command "=SHEET1A2" and it copies the info as I had hoped.

However, here is where my issue comes into place.

When I sort Column A on sheet 1 numerically, my answer on sheet 2 changes to whatever the new number is in box A2 on sheet 1.

Is there a way I can copy the info so that it changes as I sort the column numerically or alphabetically?

View 1 Replies View Related

Fill In Page From Another Page In Workbook

Dec 26, 2013

What I want to do, is to populate the Lois, Beth, Kelly and Shelley pages with the rows from the Que page when they get assigned to one of them. I tried to program then off of a different example in the forum. It didn't work. Will include the copy.

Tracking(HELP).xlsx

View 6 Replies View Related

Showing Current Page Number And Total Page Number In Entire Workbook?

Nov 14, 2013

In my header I am trying to show the current page number and the total number of pages in the workbook. So if I have 10 pages in my workbook, page 5 would read "5 of 10".

I have this in my header "&[Page] of &[Pages]". All worksheets with 1 page read "1 of 1" and worksheets with 2 pages read "1 of 2" on the first page and "2 of 2" on the second page.

View 6 Replies View Related

Page Break By Asking The Input File For Page Break To Be Done

Dec 9, 2008

The code which you provided works fine no problem for a page break. I need to run the macro for the page break by asking the input file for page break to be done.

For Example, If excel filename "A" contain the code which you have given need to ask to input the filename "B" and process need to be done in file "B".

I have added some code to your code which you provided but it gives error message "1004" "Method 'Range' of object '_Application' failed" at following line :

Set rng = oExcel.Range(Cells(2, 2), Cells(Rows.Count, 2).End(xlUp))

View 12 Replies View Related

Macro: Clear Page Breaks & Add Page Breaks

Nov 28, 2006

I need to remove all existing page breaks in a document and add a page break every 72 rows. I've tried some similar codes from this forum with other functions that I don't need in it.

View 7 Replies View Related

Get Data From Web Page

Dec 5, 2013

I used to make my excel sheets with sports statistics, but now I can't. I was able to get the data for my excel with the option "Get Data From Web Page" in Excel. It was really a simple thing but it was great for me.

But then they changed the website a little. How can I get data from [URL]....

View 1 Replies View Related

Other Page To Retrieve Data

Sep 1, 2009

In the attached file for ODM AND ACCOUNT NAME ACCOUNT PAGE TWO PAGE C1 CELLS MEVCUT.BEN to the 2009/38 VALUE ODM PAGE AVAILABLE ON A TIME I ENTER: THE ENTIRE ROW A SUTUNUNDAKI of the SAME VALUE FILE ACCOUNT INFORMATION In the LISTELEMEK would HEATING

View 4 Replies View Related

Extracting Web Data From A Sub Web Page

Jul 3, 2008

I am using the "CreateObject("InternetExplorer.Application")" method to extract data from a webpage. This webpage is a sub page that I cannot find the data for, even after filtering through all the ".document.all(x)" items? Any ideas on how to obtain this "sub page" data, since there is other data that I need which is on the "main" page? I don't want to have to call up this sub page separately since I'm already seeing it (physically able to view it on the main page but not able to extract it) from the main page?

View 9 Replies View Related

Read Data From Web Page

Sep 10, 2009

how to read entire table from the webpage/URL. But does anyone know if I want to read only one particular number from a specific location on a web page.

View 9 Replies View Related

Sumproduct Use With More Than One Page Of Data

Feb 8, 2007

A few weeks back you guys were kind enough to help me figure out a good way to use SUMPRODUCT to fetch a value from a third column using values from, in my case, two other columns. It has been a lifesaver! Now that my database grows to more than one sheet however, I am again stumped finding a method of using SUMPRODUCT to search the same data base on the next page of the workbook. Everything is the same except value of the numbers so if I can figure out how to make SUMPRODUCT drop through the first empty cell or something similar, I can continue my database search without more sleepless nights.

The values are in few enough columns such that one could put them all on one sheet, however I don`t know how to make Excel start at the top of a particular column once it has been unsuccessful in the first attempt to find the value.

View 8 Replies View Related

Tab Delimited Data From Web Page

Jan 1, 2008

I am trying to use VBA to manage invoice generation via an online service. The service is set up in such a way that the process cannot be made completely automatic, but I am trying to reduce it to as few manual steps as possible. Hence I am opening the Web Browser control in an Excel userform to streamline and guide the user's process. The invoice is generated as a Tab-delimited TXT file. I don't want to save the file to disk, and selecting 'Open' opens the file as a web page, rather than in Notepad or Excel.

One way or another this data needs to be transferred to a hidden Excel worksheet for further processing. So I am trying to devise a way to copy the data from the web page and paste it onto the Excel worksheet. Here is the relevant code from within the Web Browser's class module:

If URL Like "https://www.fedex.com/FedExMMA/downloadcenter.do*" Then
Application.Wait Now + TimeValue("00:00:01")
SendKeys "^a^c", False
Application.Wait Now + TimeValue("00:00:01")
ActiveWorkbook.Sheets("Sheet3").Paste Destination:=ActiveWorkbook.Sheets("Sheet3"). Range("A1")
End If

The "^a^c" (control-A, control-C) part works correctly; if I interrupt the code at that point I can open Notepad and directly paste the invoice data. But pasting into Excel fails in a way that has me baffled. Instead of the invoice it pastes the previous contents of the clipboard; for instance the invoice number that I copy and paste in an earlier step. I can even run the code as written above, see the invoice number pasted into Excel, and directly open Notepad, type Control-V, and have the actual invoice pasted into Notepad! It is as if Excel's paste function accesses different clipboard data from other applications. So my brief question is: How do I get the data into Excel? The longer question is: Is there some step I have missed that specifies to Excel what clipboard data to paste?

View 4 Replies View Related

2000 - Save Data As A Web Page

Apr 20, 2009

Using excel 2000 on windows XP (home). When saving data as a web page the grids do not show despite having the page setup "show grids" box ticked. It makes reading the file on line hard to follow.

View 2 Replies View Related

Stats Page Querrying Data

Aug 24, 2009

I having trouble trying to find the right formula to display statistics onto a 'Stats' page for my horse racing results from each month.

On the Stats page I have a summary of each month where I can view winners loosers, profit and loss, and the different types of racing (eg Flat and Jumps,Sprint, Non-Sprint).

For January I have two rows on a column for Sprints and Non-Sprints here I want to diplays the results (selections,won,lost) for each. The infomation on the January is all in date order and sprint races and non-sprints are all mingled in together. How do I display the infomation for sprints and non-sprints seperately on my stats page??

layout so far: (how it should be)

Stats page


racetype|selections|won|lost|placed
Sprints | 2 | 1 | 0 | 1
Non-Sprints | 3 | 1 | 2 | 0
Jumps | 1 | 0 | 1 | 0

January Page

RaceType|Result
Sprint |placed
NoneSprt |won
Jumps |lost
NoneSprt |lost
NoneSprt |lost
Sprint |won

View 11 Replies View Related

Retrieve Data From Different Page And Copy

Feb 1, 2010

I need to move data from "2010" page to page "sheet 1 (2)" so I don't have to double chart.

I want to be able to retrieve data in columns w, x, y, z, ac, and ad, on page 2010 and place them respectively in coloumns I - N on the correct row. (the row that matches the right name)

I dont' know how to do this-I don't know if it complicates things that 2010 has breaks in the data (each month has totals and are broken up. ) can anyone help?
I believe I have xcel 2003 if it matters.

View 4 Replies View Related

Auto Sort From Data Page?

Jun 12, 2014

I have a spreadsheet that I am running for world cup score predictions where people predict the result and depending on right users score sheet when I update the actual result workbook it gives them either 3 points for the right result or 1 point for the correct winner or draw of a different scoreline. All this data then feeds through to a league table of the current points.

How I would modify the macro below that when i enter the game scoreline it will automatically sort the league

This macro is currently on the league worksheet but I am guessing I need a macro on the results worksheet as well to activate this

Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column = 2 Then
Range("A2:D23").Sort _

[Code].....

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved