If the addition of two cells (a1 and b1) do not add up to more than 10 then I would like cell c1 to display the word FAIL
I've tried the following
If (a1 + b1 ) < 11 then c1 = "FAIL"
But it doesn't like it
I have two columns with values, and want to display "Valid" or "Invalid" in a third column, dependant on the two preceeding values.
If both column 1 and column 2 contain #N/A, then I want the third column to display "Invalid".
If the above is not true, then I want the third column to display "Valid".
I've been trying different syntax with IF/AND but cannot achieve the result.
I should disclaim that I'm quite novice at that, so my approach to writing macros is to record individual steps to determine the appropriate method, then copy and paste.
In any event, I have a macro that creates a word doc from content in an excel file. I copied over the code for inserting a text field from the Word Macro Recorder:
I am using the formula below to calculate the number of days left to do something, when there are no days left I want the cell to display "Begun" in red italic text. Is it possible to do that via this formula or is a macro needed? =IF(ISBLANK(E2),"",IF((E2-I2)<0,"",E2-I2-10&(" Days")))
View 3 Replies View RelatedI have a formula on cell A1, if the result of this: =SUM(COUNTIF(F:F;M40);COUNTIF(M:M;M40)) is equal to 1, I want the cell to display the word OK.
I have tryed this but it didn't work:
=IF((SUM(COUNTIF(F:F;M40);COUNTIF(M:M;M40)))=1;"ok";"error")
I have this code for setting up a sheet to begin a calculation involving the solver add in. I am getting a "Run Time Error 13: Type Mismatch" on the line that inserts a formula into the cell. I have put the first offending line in bold in the code below. Is this a problem with syntax or is there something else that I have made a mistake on?
View 2 Replies View RelatedHow to do this query but show all results found rather than just one result.
I want the result to be able to show multiple terms from the search terms and index.
for example
Bob's BMW and Ford
Result would be
BMW,Ford
Rather than just Ford
Is this possible?
Before executing my code I want to check down a column to make sure there are no entries in it. If there are then I want to display a message and then exit the sub. If all the cells in the range are empty then the code is to be executed.
What I have so far is
According to what I've read so far in this forum, this will be cakewalk for you guys to find out of (or at least so I hope.. :-) I don't know much about Excel, and what I do know is just logic sense, and a bit of common math.
My problem is in a sheet I use for my personal economy. (I'm a neatfreak, and a nerd...) The logic of my sheet is that I seperate the different type of monthly expenses, and sum them individually. The way I do this is that the A Column identyfies an expense (where 1 = rent, 2 = food, 3 = gas etc) while the C column is the expense itself, Example:
A B C
On account 500
1 rent -200
2 food -20
3 gas -10
2 food -10
Sum expenses -240
On account 260
I then use this formula to discern them:
{=ABS(SUM(IF(A$4:A$30=X;C$4:C$30;0)))}............
I´m writting a macro. It works find until a certain point. When I want to change some outputs of the macro without changing the syntax, it display an error mesage while runing the macro. It says Else without If. Which is quite disturbing because the Else was not creating any problem before. Here is my macro before I changed the conditions (this one work nicely)
Sub Copy_Sheet_Beta()
Set wba = ActiveWorkbook
On Error Resume Next
If IsWorkbookOpened("Projekt.xls", "C:Documents and SettingsfrederikSkrivebordRedd Barna") Then
Workbooks("Projekt.xls").Activate 'In case open, just activate "Projekt"
Else
Workbooks.Open Filename:="C:Documents and SettingsfrederikSkrivebordRedd Barnaprojekt.xls"
End If
Set wb = Workbooks("Projekt.xls")
wb.Activate
If Not SheetExists(wba.ActiveSheet. Range("C1").Value) Then
MsgBox "overall doesn't exist!"
Else........................................
Workbook 1 has 2 spreadsheets. Spreadsheet 1 contains Item and Pass/Fail Columns. under the item column is the serial number of the item tested. the Pass/fail column has the serial number duplicated if it failed tested. what is the formula is to have spreadsheet 2 pick the items from the pass/fail column on spreadsheet 1?
View 4 Replies View RelatedWhat is wrong with the syntax of this formula?:
COLUMNS(INDIRECT("AverageDemand!$A7:"&A$7))+4
I'm getting #REF errors and I can't work out why...
If I had the word OMNICONNECT in cell A1, is it possible to put a formula in B1 that would return OMNIC ?
View 7 Replies View RelatedI've got a long list of company names, i'm trying to create a formula to see if they match but the problem is the names won't match exactly (e.g it would be Joe Bloggs Limited & Joe blogg's ltd). I've thought about it and think the best way to see if they match would be to take the first word from the first cell (in this case Joe) and then search for it in the next cell and return TRUE if it exists anywhere in the cell and FALSE if not.
View 3 Replies View Relatedcorrectly using variables within functions used in formulas specified by VBA. Here's an example:
I want to place a formula within a workbook file called "Books 2003.xls" that goes to the version of the file for the previous year (or whatever year is specified) and does a Sum of a particular range (where that range is also specified as a variable) so it sums up the Total for the previous year for the same number of months that have data in them to date for the current year. Once VBA places the formula where it belongs, it should be able to always provide a running comparisson with the current year to date total and the totals for the same period for the previous year. Here's an example of the intent of this simple formula:
ActiveCell.FormulaR1C1 = "=SUM('[Books 2002.xls]Income Summary'!R4C2:R8C2)"
The workbook files will all be named the same way: Books 2002.xls, Books 2003.xls etc.... The range to be summed will always start at R4C2, but could then end anywhere from R4C2 (same as B4) up to R15C2 (same as B15).
I already have a routine that captures the value for the variable CurrentYear in the form "2003" and thus have another variable for PrevYear (= CurrentYear -1), and so then have a way to correctly specify the variable "BookName" to get the correct filename needed. I also have a variable for the CurrentMonth in the form of "1 through 12", and can use that to specifiy the correct RowNum needed to determine the end of the range (RowNum = CurrentMonth + 3).
I've tried to substitute the variables "BookName" and "RowNum" into the above formula with various combinations such as what follows, but I'm not getting the correct syntax with the right number of quotes etc...:
ActiveCell.FormulaR1C1 = ""=SUM('[" & BookName & "]Income Summary'!R4C2:R" & RowNum & "C2)""
This doesn't work, and I'd love to learn the correct rules for syntax when inserting variables into situations like this.
I have a large range of data and on each row the cells contain either 0, 1, No or another word. I would like to display the other word at the start but im really stuck on how to do it. This other word can change on each row but each specific row will only have one word. I can post a sample spreadsheet if necessary.
View 5 Replies View RelatedI have a long list of process steps in a collumn e.g.
A
_Tank1_CIP
_Tank1_CIP
_Tank2_CIP
_Tank4_CIP
_Tank_9_CIP
and then i have a list of tanks: Tank1, Tank2 etc. The i want a forumla to extract and return the tank in a adjacent cell:
A B
_Tank1_CIP Tank1
_Tank1_CIP Tank1
_Tank2_CIP Tank2
_Tank4_CIP Tank4
_Tank_9_CIP Tank9
I am after the formula to count the occurrence of, for instance the word 'the' in a sentence/paragraph that is contained in Cell A1. Cell B1 should return the quantity of times the word 'the' has been found in Cell A1.
View 6 Replies View RelatedI'm trying to figure out how to enter the formula for conditional formatting if I want the selected cell value to be red when it is <0.
View 4 Replies View RelatedOne of the formulas list whether or not an item is available or not. But when I try create a similar formula to indicate whether the item should be displayed or not I only end up with it being always displayed.
Code:
Option Explicit
Sub Reformat()
Dim wks As Worksheet
Dim iRow As Long
For Each wks In ActiveWorkbook.Worksheets
[Code] .......
what would be the correct format?
Below is the "real formula"
=IF(SUM($F$4-$E$4)= 0," ",SUM($F$4-$E$4)) 'If the value is 0 then enter a space in the cell.
And below is the VBA formula
"=if(sum(" & LastRowCell & "-" & FirstRowCell & ")= 0," & " " & ",sum(" & LastRowCell & "-" & FirstRowCell & "))"
The real formula works, but I am having having difficulties with the syntax of the VBA formula. The above VBA formula works to, but enters a 0 in the cell instead of a space.
I was able to get VBA to post this relative reference, which sticks the formula
=DATE(YEAR($D2),MONTH($D2)+6, DAY($D2)+1) into a cell in Col J.
All fine and dandy, works as it should with this formula.
Code:
.Cells(Row, "J").FormulaR1C1 = "=DATE(YEAR(RC4),MONTH(RC4)+6, DAY(RC4)+1)"
However, when I try this with a different formula =IF(ISNUMBER(SEARCH(C2,H2)),"REPEAT","SAFE"), I'm getting a compile error: Expected end of statement with this code:
Code:
.Cells(Row, "I").FormulaR1C1 = "=IF(ISNUMBER(SEARCH(RC3,RC8)),"REPEAT","SAFE")"
The error message highlights the word REPEAT. I suppose it's something with all the quotes throwing off where compiler thinks the end of the formula should be.
When I type a formula into a cell, it disapates into the answer. Eg: I type =100/2 into the cell. When I press enter and go back to the cell, the answer is displayed in the cell and in the formula bar. That is, it looks as if I typed in (hard coded) the cell as 50.
View 9 Replies View RelatedI Want to fetch a data as below.
ITEM RESULT
M&C_ES_F_55+_Phase1 <55>
M&C_BR_F_18-34_Phase1 <18-34>
M&C_ES_F_35-54_Phase1 <35-54>
Likewise there are many line items, wherein i want the Age should be searched in ITEM column and should be displayed in the RESULT column.
* I don't want to Use text to column method, is it possible to use IF condition along with Search formula.
I have the following code, which executes just fine:
[Code].....
The problem is that I need to run this again in a different column, and the data is held in another sheet that I have given the variable StepTwo to.
I'm not sure of the syntax to do this. Basically - this is what I need the code to do:
[Code] ....
Understandably this is totally incorrect, but it's the best I can do to explain what I'm actually trying to do....
The two parts of SUMIF are both held in a workbook that I've given the variable "StepTwo" to. Both sets of data are also held on Sheet(1) of that workbook.
I am using Excel 2007 in Windows XP. I am trying to change the worksheet referenced in a formula from the label of the worksheet to the index of the sheet. I want to use this macro in multiple workbooks, and the relevant sheets have different names but are all in the same position.
I used "record macro" to get the structure of my code. It gave me the line:
ActiveCell.FormulaR1C1 = "=SUM('8Nov11'!R[13]C[-4]:R[108]C[-4])"
I want to change that '8Nov11' to the 3rd worksheet from the left, so something like:
ActiveCell.FormulaR1C1 = "=SUM(ThisWorkbook.Sheets(3)!R[13]C[-4]:R[108]C[-4])"
I can't get this to work, and I can't find the syntax for this anywhere. I've tried with and without quotes, exclamation points, changing to A1 notation and using "Range," "Sheets," "Worksheets," "Item(3)", and many other combinations, but haven't gotten it right.
Most of the errors I get are "Runtime Error 1004: Application-defined or object-defined error."
B1=Name of WorkSheet
B2=Name of 2nd Worksheet
I am trying to write a sum formula using Indirect so that the end-user can enter the names of the sheets in B1 & B2 (the values are always in cell F5 on each sheet). I thought this would work but it is throwing a REF# error.
=SUM(INDIRECT("'"&B1&":"&B2&"'!F5"))
with some added spaces for clarity:
=SUM(INDIRECT(" ' " & B1 & " : " & B2 & " ' ! F5"))
I trying to write a conditional formula to test data in a cell to see where it falls between certain values, and depending on the data in the cell, will display a message in another cell showing what level has been attained. It's a long formula and I may not have the syntax correct. Can someone look at this and tell me where I have went wrong? All I get in the target cell is "################".
Here is the formula:
Try this formula. Array formulas will have curly brackets {} emcompassing the ENTIRE formula. You do not add these, you Enter the formula with Ctrl+Shift+Enter and Excel will add them (details: Array formulas). Many more Excel Formulas
=IF(c13<1600,"Not at prize level yet",IF(AND(c13>=1600,c13<=1999.99),"You have reached level 1",IF(AND(c13>1999.99,c13<=2499.99),"You have reached level 2",IF(AND(c13>2499.99,c13<=2999.99),You have reached level 3,IF(AND(c13>3000,c13<=3499.99),"You have reached level level 4",IF(c13>3500,"You have reached the top level!!"))))))
I have a problem where I am linking data from two worksheets say: worksheet 1: A1 = 10, A2 = 20 worksheet 2: A1 = =Sheet1!A1, A2 = =Sheet1!A2
I have filled this formula through a certain number of cells on sheet 2 so that if i add more data to sheet1 it will appear in the appropriate place on sheet2. Is it possible to show the formula results in the formula bar, i.e. sheet2: A1=10, A2=20, such that i can used 'Find' or 'Autofilter' on the cell values rather than the formula?
I want to display the formula in the adjacent box to where it is actually used. Would anyone happen to know how to get that done? Example:
If cell A1 contains the following formula: A1+ A2
I want cell A2 to show : '= A1+A2'