I am trying to write a formula for a vlookup by product codes for a very large set of data which is then summed. My problem is that not all of the product codes are used, resulting in a large amount of #N/A errors that prevent me from being able to sum the columns.
Is there a formula that I can use to return a 0 in place of an #N/A for a vlookup?
I am receiving a run-time error with following code. The error message is "unable to get the VLookup property of the WorksheetFunction class". I only receive the message when the lookup value is not found in the table.
I thought adding the "False" command at the end would return an "N/A" but it didn't. Is there anything I can add to avoid this error?
I created a workbook with three sheets, I do a vlookup formula that looks like this:=VLOOKUP(D3,Sheet3!A:D,2,FALSE)
so basically, find the value of D3 and look for the exact match in sheet 3 (column range a-d) then report back the value found in the second column.
I get an #NA error with this. Funny thing is that if I go to sheet 3, find the correct value and "re-type" it in, it will now pull the information I want.
I've tried some basic formatting changes that dont fix the issue and the only thing that seems to work is retyping the values into sheet 3.
I've got about 1500 rows I'd have to retype so the idea doesnt excite me.
Why I am getting N/A errors in sheet 1 of workbook?
For example, in sheet1, Cell B2 should equal 3. And it should stretch across the entire data range, so even something like B14 should return 3.
I've tried using the following (simplified) code to look up a date in a named range and return the result from the same row in the next column to the right. I can do this easily in the worksheet, but I can't write a VBA function to do it. Code:
View 2 Replies View RelatedI want to learn VLOOKUP formula in this following problem.
VLOOKUP($A3,Sheet2!$A$2:$Q$13,$D2,0)
I am attaching the file for the same.
I am trying to run the macro and I get this error:
Compile Error! Sub or Function not defined
for the following
RFQnum = VLookup("RFQ Number", CPARSdata, 2, False) 'RFQ# should be same for each supplier
CPARSdata is a named ranged with 25 columns and 338 rows
I am using Vlookup to search for a text string in column A and storing the value of column B for more than 40 variables.
I do NOT want a macro error on Vlookup each time it can not find a match. I want to store an "error message" in that variable and move on.
countif and a rountine handler sounds like a lot of coding for each variable; can I use ISNA?
SAMPLE
Sheets("CPARS download").Select 'CPARS DOWNLOAD
RFQnum = Strings.Mid(WorksheetFunction.VLookup("RFQ Number", _
Range("CPARSdata"), 2, 0), 1, 13) 'RFQ# should be same for each supplier
' RFQnum = Mid(RFQnum, 1, 13) 'truncate the supplier code at the end
BidDue = WorksheetFunction.VLookup("Bid Due Date", Range("CPARSdata"), 2, 0)...........
I am struggling to figure out why my vlookup does not work, i am trying to vlookup invoice cost based on the model numbers which is in text.
I have converted the text to general but this still does brings the N/A errors, is there something else i am forgetting?.
My formula is
=IF(E2"C",0,Vlookup(D2,NUM_GAME_PACK,QUA,FALSE))
I need to replace the error with a 0.
I have written some code to perform a Vlookup for some data from another sheet but when i run the code it comes up with runtime error '438' "Object doesn't support this property or method".
Sub RAS_StockUpdate()
Dim Count As Integer
Dim SKU As Long
Dim FileName As String
FileName = ActiveWorkbook. Name
Workbooks.Open FileName:= _
"\Hwyfile1publicRange TransitionRAS DatabaseRAS_Data_Export.xls"
Windows(FileName).Activate
For Count = 1 To 100
Range("B16").Select
ActiveCell.Offset(Count - 1, 0).Select
Select Case IsNumeric(ActiveCell)
Case True...................................
I have a sheet that uses vlookup when the lookup returns #na error how can i conditional format these cells to so text is same as background
View 9 Replies View RelatedWhen I have the Vlookup formula and the field where I have the data to lookup is empty I get a sign with a number symbol and N/A, how can I tell excel not to show me this when the field where I type the information that I want to look is empty?. I want all the formulas fields to show nothing.
View 6 Replies View RelatedPlease find the attachment in which i have mentioned all the details about the error in VLOOKUP function. I couldn't understand why I am getting that error for that single Vlookup value while others are ok.
Vlookup error.xlsm
I'm running this line (from longer code of course), where i/g are integers and h is a range:
[Code] ......
And I'm getting run time error '1004'.
I need to find the average talk time in a week for my agents. I have the data from Monday through Friday and I need to average up the talk time.
I am using average and vlookup formulas. At first I tried:
=AVERAGE(VLOOKUP(B8,Monday!$1:$1048576,3,FALSE),VLOOKUP(B8,Tuesday!$1:$1048576,3,FALSE), VLOOKUP(B8,Wednesday!$1:$1048576,3,FALSE),VLOOKUP(B8,Thursday!$1:$1048576,3,FALSE),VLOOKUP(B8,Friday!$1:$1048576,3,FALSE ))
[Code].....
How can I effectively calculate average with time but tell it to ignore the value if there is an error?
I'm looking for some direction with enhancing this code:
Code:
Case "L18"
Dim dfcust As String
Dim wshgrp As Worksheet
[Code]...
With this code, wshmain.range("Y18") is populated with the value associated with the vlookup. However, problems exist when the vlookup fails. If the vlookup fails, I don't want to try to populate wshmain.range, just simply .protect and abandon.
I need a formula that will use the account number in Column A (My consolidated Spreadsheet) to search for the same account number in column A (My Individual Unit Spreadsheet) and return a value in the corresponding column. I know I can use VLOOKUP to do this but if the account number value does not exist in the Individual Unit Spreadsheet I do NOT want the #N/A value to show up in the cell, as it will then not calculate totals. Solutions please?
CONSOLIDATED
GPCLCCGCLPSILVRConsolidated
Assets :
Current assets
100100
Daily Depository - Union Bank
425 425
100300
Plant (A/P) Checking Account
(680) -680
100350................................
I used the formula from this website to do a vlookup for pictures
www.mcgimpsey.com/excel/lookuppics.html
It was working great then I seem to have a problem currently I have 58 pictures on the spreadsheet and when I add the next one I keep on getting an error
Error reads
Runtime error 1004
Unable to set the picture property of the picture class
I'm working on a spreadsheet for a gaming community. This sheet is used by more than 3000+ players and growing. It has to be updated roughly twice a week for new inventory items, which can range from 1 to 3 new items weekly.
To make it easier on new and existing members, I want to create a way to make updates with the spreadsheet easier and to allow players an easier way of updating the spreadsheet rather than re-entering all the data over and over again twice a week.
So, I started to use VLOOK in some formulas to look at the data and pull the corresponding information. However, this same information is used throughout the sheet and referencing this information has brought about #VALUE errors that I cannot seem to figure out how to get around.
I've included a copy of the spreadsheet to download and review in hopes of finding a solution.
Here's what this speadsheet is doing:
MyInventory is where the players will enter all their items, with some being drop-down selections and manual entry.
The LookupedInventory worksheet is where the VLOOKUP (columns C,G,J,Q,etc.) formula is used to look up entries in the MyInventory worksheet and pull their values over to the LookupedInventory worksheet.
Now these values from the LookupedInventory will be carried over into two other worksheets, InventoryTableAttack and InventoryTableDefense. These two worksheets are where my #VALUE errors are appearing. If the cell referenced is empty, the #VALUE error appears. However, if the cell references a number, the rest of the formulas tied to to this cell reference work. However, since there are errors, the rest of the worksheet cannot function until I fix all the #VALUE errors.
So, what I'm seeking is to see where my issue is and what I need to do to fix it.
If I need to take a different approach to this, please let me know what that is and how to go about doing it.
I've even thought about a macros that copies and paste all the current data from an older spreadsheet to the new one, but I'm not that good at macros. If I can stay away from macros, that would be good, but if not, then I'll have to dig in my heels and start leaning.
I have a formula that has been working and it looks like this
=VLOOKUP(A13;'IFS export'!$A$1:$F$19000;4;FALSE)
Now I want to use the same formula in an other workbook and it gives an error
=VLOOKUP(A2;DRAWING!$A$2:$C$9168;3;FALSE)
When I type this formula I get the window that says
"This formula contains an error.
*For information about fixing common formula problems, press help.
*...........
*..........."
And if I go and try to change the first formula that has been work it gives me the same error.
Needing to do a VLOOKUP on two criteria, I have set up a string using "&" to join together the contents of two cells. This is in a workbook with many identical worksheets. The string works for some of the sheets but in others, for reasons I simply cannot fathom, it is returning a #VALUE! error.
View 9 Replies View RelatedMy problem is that I am getting the N/A error in cell M3 if L3 is empty. I would like the forumla to 'ignore' cell L3 if it is empty. I do not want a zero put in there. I have looked up information on ISBLANK function but the more I read the more confused I am getting
View 6 Replies View RelatedI have a range of data that i have copied in from another source. I have a list that I am trying to perform a vlookup from but its only returning #n/a. my forumula looks like this: =VLOOKUP(A1, 'range'!A:C, 3, 0). On my range worksheet, if i double click on one of the cells i.e. A1, then the data in the cell right aligns in the cell and the data in column 3feeds through to my vlookup. I have about 3000 cells that require a lookup, do I need to double click each of them in succession in order to get my lookup to work?
View 6 Replies View RelatedI haven't had issues with vlookup on other worksheets, but this one is giving me trouble. I have attached the excel file for your consideration.
The lookup value is in cell U2, formatted as a date
The table array is V2:Z19
The column index number is 2 for C3
False lookup
I've tried the formula with and without the text function for the date and I've also tried different formats for the dates in columns V to Z because I know the format of the cells have to match for vlookup. It is very frustrating because this should be simple, but it is messing up.
I'm trying to use this formula but I get the error "too many arguments". How can I do the same as the formula without an error:
=IF(ISNA(VLOOKUP(B12,GYROLOK316ANDM!A12:E2000,3,FALSE)),VLOOKUP(B12,GYROLOKBR!A12:E2000,3,FALSE), VLOOKUP(B12,VALVESFILTERS!A12:E2000,3,FALSE),VLOOKUP(B12,GYROLOK316ANDM!A12:E2000,3,FALSE))
I added in the VLOOKUP(B12,VALVESFILTERS!A12:E2000,3,FALSE) - when I used it without that it worked. But I have 3 sheets I need the the VLOOKUP to look over and this formula that I copied off another thread only had 2 tabs.
In the attached sheet I am trying to use the formula below but am getting a #NA error. I have narrowed the problem down to the use of the SEARCH and LEFT functions that I am using to determine the lookup value of the VLOOKUP formula.
what I am doing wrong? If I substitute the SEARCH and LEFT function with the number "14" it works just fine. You can find examples of both in cells B29 and C29 on the rename tab.
I have a vlookup table with will define the Job description based on the job number & cost code. The function is working fine but the problem come when i try to convert it into macro.
View 10 Replies View RelatedI am using below code to open file from 2 diff. folder and trying to do vlookup.
Its working in single loop but not moving to next file
Error: Invalid procedure or call argument.
Sub vFunction()
Dim strTempName As String
Dim strPath As String
Dim wb As Workbook
Dim wb1 As Workbook
Dim strFile As String
Dim strFile1 As String
[Code] ...........
I have 5 worksheets in file Z on drive J which are full of VLOOKUP formulas pulling data from several files on drive K. Each worksheet pulls data from it's own file on drive K...ie, worksheet AB pulls all of it's data from file AB_2008, etc. On worksheet CD there are two rows which populate with #N/A when I open file Z, but if I open file CD_2008, the #N/A's automatically populate with the correct values. Any ideas??? I am not a programer but I have pretty fair excel skills...but this one has stumped me.
Here's my formula:
=VLOOKUP($A19,'K:sopworkbookssop_2008[sop_2008_rt.xls]11-RT-PPR'!$A:$BQ,C$34,FALSE)
