Write This Worksheet Formula In VBA
Jan 1, 2010I want to write the following worksheet function in VBA. In cell B1 : =IF(OR(A1={1,2,3,4,5,6,7,8,9,0}),"Yes","No").
View 3 RepliesI want to write the following worksheet function in VBA. In cell B1 : =IF(OR(A1={1,2,3,4,5,6,7,8,9,0}),"Yes","No").
View 3 RepliesI am trying to write a macro that will insert a formula directly into the cells in column M of my worksheet.
The worksheet has about 3400 rows. When I run the macro it does not adjust the cell reference in the formula so I am getting the same value in all 3400 rows.
I am using the following ....
I managed to write my script with pretty much the info I could find on the forums (yes!) but I need to write my data to the last row. Columns A - D of the last row will be populated with the content of my variables. This little snipped gives me the first empty row:
View 5 Replies View RelatedHow do I write a sub to prevent all changes to a worksheet?
This is part of my thinking in covering all possible mishaps that could occur when working with sheet movement. If I could somehow introduce an active protection on either my Sheets(1) or Sheets("Main"), then I could prevent accidental writing to or removal of said sheet.
I want to know how to make a spreadsheet automatically control the zoom of a worksheet depending on the size of the screen it is opened on. For example, if it is opened on a screen of a certain size then it will set the zoom to 80% so the worksheet will show only a certain section. I want my worksheets to look the same on even the larger screens and not show the unused rows and columns around the section I am wanting to highlight.
In a previous thread I was told I might need to write an API to help me with achieving this. First of all, what is an API? Secondly, how do I go about writing one?
I have two userforms. The 1st is called “add a facility” and the second is called “Edit Facility”.
The first userform works pretty well. It places all the data in the right columns in the first empty row at the end of the table. Then the “sort” procedure places the “new” facility data in the right category. Everything is good there. Here's the code.
Private Sub CmndInput_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("Facilities")
' find first empty row in database
iRow = ws. Cells(Rows.Count, 2).End(xlUp).Offset(1, 0).Row
'check for a Facility
If Trim(Me.TextFacility.Value) = "" Then
Me.TextFacility.SetFocus
MsgBox "Please enter a Facility"
Exit Sub
End If
'copy the data to the database
ws.Cells(iRow, 1).Value = Me.ListBox1.Value
ws.Cells(iRow, 5).Value = Me.TextFacility.Value
ws.Cells(iRow, 4).Value = Me.ListBox2.Value
ws.Cells(iRow, 6).Value = Me.TextType.Value
ws.Cells(iRow, 7).Value = Me.ListBox3.Value
ws.Cells(iRow, 12).Value = Me.TextConstneed.Value
ws.Cells(iRow, 16).Value = Me.TextPREAPP.Value
ws.Cells(iRow, 17).Value = Me.TextPreapsub.Value
ws.Cells(iRow, 3).Value = Me.TextDescription.Value
ws.Cells(iRow, 8).Value = Me.ListBox4.Value
ws.Cells(iRow, 9).Value = Me.ListBox5.Value
ws.Cells(iRow, 2).Value = Me.txtRefnum.Value
ws.Cells(iRow, 21).Value = Me.txtappdate.Value
ws.Cells(iRow, 24).Value = Me.ListBox6.Value
ws.Cells(iRow, 20).Value = Me.txtsubdate.Value
ws.Cells(iRow, 10).Value = Me.ListBox7.Value
' SORT Macro...
how to write a macro, which in turn write some VBA code in a worksheet?
View 4 Replies View RelatedI'm trying to protect a worksheet with a password using macro.
View 9 Replies View RelatedI am trying to write the contents of a worksheet to a notepad file. Also, the worksheet has some hidden columns.
I'm trying to have a macro write down an array formula, but when I hit ctrl+shift+enter, the recorder says it can't record. If I write in the macro ...FormulaR1C1 = {=...} then I get the formula as a text. Is there a way to tell the macro that a formula should be entered as an array formula?
View 2 Replies View RelatedI basicaly need to look down column Q8 to Q52 for the falue "C19"
If that value is present - Then I need to look up the value of associated
with what is in its respective cell in column O8 to O52.
Then add them all together.
I have the formula that follows and it works, however it is huge. I have to repeat the IF,Vlookup 44 times. Just wondering if there is a better way.
Here is the formula I am using.
=SUM((IF(Q8="C19",(VLOOKUP(O8,clusterequipmentvalues,2,FALSE)),0)),
(IF(Q9="C19",(VLOOKUP(O9,clusterequipmentvalues,2,FALSE)),0)),
(IF(Q10="C19",(VLOOKUP(O10,clusterequipmentvalues,2,FALSE)),0)),
(IF(Q11="C19",(VLOOKUP(O11,clusterequipmentvalues,2,FALSE)),0)),
(IF(Q12="C19",(VLOOKUP(O12,clusterequipmentvalues,2,FALSE)),0)),
.... all the way to C52.
Write a formula with a cap of 125%
A
B
C
D
1
x
y
z
2
Commission
1000
1000
500
[Code] .......
How to write the formula to know how much commission with be paid out for x,y,z?
need to write this forwula for excel 1000((value from cell)+.256)=(((x+.314)1000)+9)1.0625. I would like to plug in a value from a cell and find the comparative value x. I am comparing the airfregiht cost between two carriers that have different surcharges for fuel, secuirty, and tax. One has no security or tax.
View 4 Replies View RelatedMy Columns are as follows:
A1-Criminal Name, B1-Crime, C1-Age, D1-Ratings, E1-Punishment
In the punishment column one will get 22 years life imprisonment if he fulfills the following conditions.
1. He must have done Rape OR Murder
AND
2. His Age should be >30
AND
3. His Ratings should be>8
It should throw 22 years in the Punishment column only if the above conditions are met otherwise it should be Nil.
More Info on this:
1. Crime column includes Murder, Rape, Robbery, Assault, Kidnap etc
2. Age column ranging from 22-75 years.
3. Ratings column ranging from 1-10 points
4. There are 3400 records we have in the list
How to write an IF AND OR combination formula for this ?
I am trying to write a formula using IF, OR & AND combined together, but I can't see to get my formula in the correct order. I have tried moving several sections around but I still keep getting an error.
IF(OR((A2="1A",A2="2A",A3="3A",AND(IF(OR(B2="Q4 2013",B2="Q1 2014"),"Y","N")
I'm looking to write a nested IF formula which will be dependant on certain cells that have errors in them (because those error cells have a formula in them which can't formulate becuase the numbers needed for that formula haven't been entered yet).
For example.
Cell A1=#DIV/0!. Cell B1=5.
In cell C1 I want to calculate the average between A1 & B1, but there is an error in A1.
I'm trying to figure out how to make a formula which ignores an error and gives me the value in the cell which doesn't have an error. But I also need it to calculate the average if both cells have a value in it.
I have a sum field in excel which contains the formula to compute sum of certain cells. For eg. Cell C1 has value (C2+C4).
I have written a vba code to find cells whose value are to be included in the sum field (variables Lrow1,Lrow2 and Lcolumn1,Lcolumn2 contains the row and column number respectively). These cells may differ each time vba code runs. Can I write formula in the sum field based on Lrow and Lcolumn variables.
I have got mentioned below result after running a macro and I want mentioned below formula to be put after counting rows, because each time as per my query when I run macro result is different in rows as you can see in below table the formula I put in column F in rows 19, 20, 21, and 22.
ABCDEFG5DateD.IDAmountNODiff2TimeZone62-May-091001 500 50 - 1:50P-172-May-091002 10,000 120 - 1:15P-182-May-091003 2,000 100 - 1:15P-192-May-091111 300 40 - 1:50P-2102-May-091112 100 20 - 1:50P-2112-May-091113 234 100 - 1:50P-2122-May-091114 124 80 - 1:50P-2132-May-091211 380 3 - 1:00P-3142-May-091212 908 50 - 1:50P-315 Average1:14 16 Total Pins10191 17 18 ZoneRequest Count 19 P-13 20 P-24 21 P-32 22 Total9
Spreadsheet FormulasCellFormulaF19=COUNTIF($G$6:$G$14,E19)F20=COUNTIF($G$6:$G$14,E20)F21=COUNTIF($G$6:$G$14,E21)F22=SUM(F19:F21)
Excel tables to the web >> Excel Jeanie HTML 4
Power.jpg I must write a double interpolation formula for the table.
View 6 Replies View RelatedI need to work out the profit margin from goods i sell.
I have cost A2
Pack size A3
Net cost A4
Tax A5
Gross price A6
I need to work out the margin between A5 and A6.
I thought that a nested if is what I needed, but now I don't know what I need I have explained in greater detail within my sample that's attached. Quote:....
I don't know how to write a function for what I need. Right now I have a function that says '= if $b7=0,0,if($d7>$d5,-1,1)), but I've found a problem. If there's more than one zero it throws off what I'm doing. I need a function that will ignore any zeros within column D and use the second to last number. For example:
The formula in E12 should read '=if($B12=0,0,if($D12>$D8,-1,1))
The formula in E13 should read '=if($b13=0,0,if($D13>$D9,-1,1))
The formula in E20 should read '=if($b20=0,0 ,if($d20>$d12,-1,1))
I just don't know how to write this so that it will go back to the second to last number other than zero.
If the total is >= to x but =(I10*0.9),"Over 90% spent",IF((M10+T10+AA10+AH10+AO10+AV10+BC10+BJ10)>=(I10*0.8)&(M10+T10+AA10+AH10+AO10+AV10+BC10+BJ10)
View 3 Replies View RelatedI have a spreadsheet. In this sheet the data is added daily so one column is increased everyday. The rows may also be increased. What I am trying to do is to sum the data in each row for a range of first cell in the row to the last non empty cell in that row and this has to be done for all the rows. So I thought the for loop would be useful for such requirement and I tried to write the following code. But unable to write the sum formula in the last empty cell in a row and I get the value error. The code is as follows.....
Sub sum_on_LastEmptyCell()
'find the last empty row in column A
lrow = ThisWorkbook.Sheets("sheet1").Cells(Rows.Count, 1).End(xlUp).Row + 1
'find the last empty column in a row
[Code] ........
Though one of my friend told that it can be done with "with and end with block but I am not aware of with and end with block.
It would be better if you tell me that how can I put the sum formula in my code. How can I use variables which return the row number and the column number in the sum range within the For loop because I want to put If Else condition for the calculations within the For loop i.e. if certain condition is true then I want this calculation to take place otherwise do something else. Moreover it will be easier for me to understand. Because I can use different formula based on different cells as well. Is there any way to do this?
I've got a "Date" Column which has every day of every month, and next to that several columns with different types of data to correspond to a particular date.
To simplify this (because there are TONS of dates), I've made another "Date" column that displays only every 5th day. Now what I'd like to do of course is average the corresponding data over five days.
I don't know how to write a single formula that I can copy down that will do this.
I've attached a sample spreadsheet with only one month's data, the stuff I need a formula / code for is in red
how to write vba code using vlookup formula insert pic from picture folder
View 5 Replies View RelatedI'm trying to write a formula that will count the number of unique occurrences in a column, if a specified value is found in a different column.
So I want to count the number of unique values in the "ID" column if let's say the text "NameA" appears in the "Name" column.
ID Name 12345
NameA
NameB
NameA 12346
how to write a formula that will leave a cell blank if nothing is entered. I do not want it to show a 0 unless the cell entered is a 0.
In cell G16 - I am adding U46 and U58 together.
I do not have a problem when it is 1 cell - my formula works fine. When I have 2 cells added together, the formula does not work.
I'm wondering if an if then else function can be written for the problem that I'm having? Or is there a better way to accomplish this? I've detailed my problem within the example attached.
View 3 Replies View RelatedI have a question, that could be answered by the experts in this forum. Question: I need to write the letter "E" in the second column (B) when I find that any cell in a row is in orange color (color 44). The code I wrote:
View 3 Replies View RelatedI have a checkbox that hides a range of columns when deselected and unhides the range when checked. I also want the code to write a value (1) to a cell when hidden and change the value to another value (0) when unhidden.
The range is hidden and unhidden perfectly, but the value "1" is written and doesn't change regardless of whether it is hidden/unhidden. (the value flicks momentarily to "0" when unchecking).
Code:
Private Sub cbTermPrev1_Click()
If cbTermPrev1.Value = True Then Range("Term_Prev1").EntireColumn.Hidden = False
Range("HiddenValPrev1").Value = 0
If cbTermPrev1.Value = False Then Range("Term_Prev1").EntireColumn.Hidden = True
Range("HiddenValPrev1").Value = 1
End Sub