I'm looking to write a nested IF formula which will be dependant on certain cells that have errors in them (because those error cells have a formula in them which can't formulate becuase the numbers needed for that formula haven't been entered yet).
For example.
Cell A1=#DIV/0!. Cell B1=5.
In cell C1 I want to calculate the average between A1 & B1, but there is an error in A1.
I'm trying to figure out how to make a formula which ignores an error and gives me the value in the cell which doesn't have an error. But I also need it to calculate the average if both cells have a value in it.
Private Sub TextBox135_Change() On Error Resume Next TextBox138.Value = Format(CDbl(TextBox135.Value) / CDbl(TextBox86.Value), "0.0000")[code].....
It suppose to take one input and calculate for the other variables the problem is that once it writes the outputs the other text box it activates the second text box code so I keep getting the error "13" and the result is the same no matter what number I put.
I have the following code which I just cannot get to work.
Sub Macrotest() ............. End Sub
The first time it saves it to the folder where business can view I don't have problems, but during the course of the day the info changes and I need to re-update the file.
This is where the problem comes in, as soon as it wants to overwrite the file in this folder :="J:BUSINESSStandardisationBSIS Reports.xls" it gives the Run time error '1004' with the statement the file is write reserved. Obviously the macros basically bombs out and doesn't save the new version over the old.
I create and delete a conditional formatting rule programmatically. The issue I am facing is when I try to delete the conditional formatting rule that I programmatically created, I ran into the following errors:
1. Exception from HRESULT: 0x800A03EC 2. Attempted to read or write protected memory. this is often indication that other memory is corrupt.
I get these errors only when I have user created conditional formatting rules prior to deleting – I don’t want to delete all conditional formatting rules using FormatConditions.Delete(). Further, I can’t use FormatConditions[index].Delete() because I don’t have a index reference for the one that was created from the application.
Note: I have checked the Trust access to the VBA project object model.
I'm trying to have a macro write down an array formula, but when I hit ctrl+shift+enter, the recorder says it can't record. If I write in the macro ...FormulaR1C1 = {=...} then I get the formula as a text. Is there a way to tell the macro that a formula should be entered as an array formula?
I basicaly need to look down column Q8 to Q52 for the falue "C19" If that value is present - Then I need to look up the value of associated with what is in its respective cell in column O8 to O52. Then add them all together.
I have the formula that follows and it works, however it is huge. I have to repeat the IF,Vlookup 44 times. Just wondering if there is a better way.
Here is the formula I am using.
=SUM((IF(Q8="C19",(VLOOKUP(O8,clusterequipmentvalues,2,FALSE)),0)), (IF(Q9="C19",(VLOOKUP(O9,clusterequipmentvalues,2,FALSE)),0)), (IF(Q10="C19",(VLOOKUP(O10,clusterequipmentvalues,2,FALSE)),0)), (IF(Q11="C19",(VLOOKUP(O11,clusterequipmentvalues,2,FALSE)),0)), (IF(Q12="C19",(VLOOKUP(O12,clusterequipmentvalues,2,FALSE)),0)), .... all the way to C52.
need to write this forwula for excel 1000((value from cell)+.256)=(((x+.314)1000)+9)1.0625. I would like to plug in a value from a cell and find the comparative value x. I am comparing the airfregiht cost between two carriers that have different surcharges for fuel, secuirty, and tax. One has no security or tax.
I am trying to write a formula using IF, OR & AND combined together, but I can't see to get my formula in the correct order. I have tried moving several sections around but I still keep getting an error.
I have a sum field in excel which contains the formula to compute sum of certain cells. For eg. Cell C1 has value (C2+C4).
I have written a vba code to find cells whose value are to be included in the sum field (variables Lrow1,Lrow2 and Lcolumn1,Lcolumn2 contains the row and column number respectively). These cells may differ each time vba code runs. Can I write formula in the sum field based on Lrow and Lcolumn variables.
I have got mentioned below result after running a macro and I want mentioned below formula to be put after counting rows, because each time as per my query when I run macro result is different in rows as you can see in below table the formula I put in column F in rows 19, 20, 21, and 22.
I thought that a nested if is what I needed, but now I don't know what I need I have explained in greater detail within my sample that's attached. Quote:....
I don't know how to write a function for what I need. Right now I have a function that says '= if $b7=0,0,if($d7>$d5,-1,1)), but I've found a problem. If there's more than one zero it throws off what I'm doing. I need a function that will ignore any zeros within column D and use the second to last number. For example:
The formula in E12 should read '=if($B12=0,0,if($D12>$D8,-1,1)) The formula in E13 should read '=if($b13=0,0,if($D13>$D9,-1,1)) The formula in E20 should read '=if($b20=0,0 ,if($d20>$d12,-1,1))
I just don't know how to write this so that it will go back to the second to last number other than zero.
I have a spreadsheet. In this sheet the data is added daily so one column is increased everyday. The rows may also be increased. What I am trying to do is to sum the data in each row for a range of first cell in the row to the last non empty cell in that row and this has to be done for all the rows. So I thought the for loop would be useful for such requirement and I tried to write the following code. But unable to write the sum formula in the last empty cell in a row and I get the value error. The code is as follows.....
Sub sum_on_LastEmptyCell() 'find the last empty row in column A lrow = ThisWorkbook.Sheets("sheet1").Cells(Rows.Count, 1).End(xlUp).Row + 1 'find the last empty column in a row
[Code] ........
Though one of my friend told that it can be done with "with and end with block but I am not aware of with and end with block.
It would be better if you tell me that how can I put the sum formula in my code. How can I use variables which return the row number and the column number in the sum range within the For loop because I want to put If Else condition for the calculations within the For loop i.e. if certain condition is true then I want this calculation to take place otherwise do something else. Moreover it will be easier for me to understand. Because I can use different formula based on different cells as well. Is there any way to do this?
I've got a "Date" Column which has every day of every month, and next to that several columns with different types of data to correspond to a particular date.
To simplify this (because there are TONS of dates), I've made another "Date" column that displays only every 5th day. Now what I'd like to do of course is average the corresponding data over five days.
I don't know how to write a single formula that I can copy down that will do this.
I've attached a sample spreadsheet with only one month's data, the stuff I need a formula / code for is in red
I am trying to write a macro that will insert a formula directly into the cells in column M of my worksheet.
The worksheet has about 3400 rows. When I run the macro it does not adjust the cell reference in the formula so I am getting the same value in all 3400 rows.
I'm trying to copy an ELOOKUP formula down a column in a sheet. The formula is losing part of the table array when I carry it down and returning an N/A error. Interestingly, it will work when I copy it across a row.
I'm having some trouble trying to get excel to input a formula into a cell. I'm still a novice at VBA right now, so I don't think my problem will be too much of a brain buster.
I want a formula in Cell A6 (and I already know it correctly works) in this format: =E6&VLOOKUP(I6,'FA-Fund Data'!B$1:C$2000,2,FALSE)&J6
I'm trying to write a macro that will insert a excel formula into a specific cell. When I try to run the macro I receive a compile/ syntax error. I don't understand why as the formula works in excel. Here is the code (formula only)
i am trying to collect data that is true to 2 criteria from sheets in a workbook the formula i am trying is =SUMIFS("Week"&ROW(1:1)&"!F436:L436","Week"&ROW(1:1)&"!F6:L6","=9001","Week"&ROW(1:1)&"!F7:L7","=230 108000").
why I am getting a #Value! error with this formula? When the code highlighted in red is not included then the formula works just fine! But as soon as I add the (red) code I get the #Value! error.
