Dim myFileName As String
Dim myworksheet As Variant
myworksheet = ThisWorkbook.ActiveSheet
myFileName = ThisWorkbook.ActiveSheet.Range("h1").Value
ChDir "C:TechnologyComponents"
ActiveWorkbook.saveas Filename:=myFileName
There is only one sheet in this workbook, the sheet name changes each time I run other codes. I am bringing the value of the sheet name into a H1 cell and trying to save with that name.
I have some code that copies a worksheet and saves into a new workbook and saves into a specified folder and renames the new workbook.
It is all working fine however it is saving to my desktop and not the specified directory. I know there is a lot similar out there and i have exhausted my google skills trying to find the similar format to the one i am after.
Code:
Sub MonthlyReset()
Dim sourceSheet As String
Dim clearR As Range
Dim newFile As String
[Code]....
I am attempting to save a workbook when it opens, but when the code is run, it is not saving. For the purposes of finding the problem with the code, I have simplified it down to the following:
Code:
Private Sub Workbook_Open()
Range("C3") = "HEY"[code]......
I have been working on this application for the past couple weeks and I have this module of code that copy's a worksheet into a new workbook and changes everything into values. However I have added buttons onto this sheet and after running the code again it froze the program, in which I had to manually end. It gave an error afterwards however I don't remember what it said. Now everything I try to run or step through it, nothing happens. And I have turned Events and ScreenUpdating on.
I would also like to note that it won't allow me to perform actions like unhide sheets or unprotect them. The code has not been changed either so what has happened to disable all functionality.
[URL] .....
I have been working on this application for the past couple weeks and I have this module of code that copy's a worksheet into a new workbook and changes everything into values. However I have added buttons onto this sheet and after running the code again it froze the program, in which I had to manually end. It gave an error afterwards however I don't remember what it said. Now everything I try to run or step through it, nothing happens. I have turned Events and ScreenUpdating on.
View 2 Replies View RelatedEach of the worksheets in my model use A1 as a control cell for any errors and inconsistencies. My aim is to disable save and close commands in case A1 is not equal to 0 in any of the worksheets.
The code I currently use for that purpose is as follows.
I have previously used the following code to successfully pull out IE webpage source code for string manipulation.
Its a crude example to demonstrate the principle:
Public Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)
Public IE As Object
Sub Sample()
Set IE = CreateObject("InternetExplorer.Application")
IE.Visible = True
[Code] ......
However when I substitute in a Google websites address into the IE.Navigate command, the code runs to the "Source_Code = IE.document ...." line then flags up a Microsoft Visual Basic error. "Run-time error '438': Object doesn't support this property or method"
The webpage that I am trying to access is a confidential company site, so you won't be able to access it yourself, but starts with [URL] ......
The one thing that I have noticed about this website is the Privacy Report icon in the lower right status window (Picture of an eye with a restricted symbol in front). I don't know whether this is the cause of my problem, or purely an incidental observation.
Is there something peculiar with Google sites that means that the source code cannot be extracted in general, or is this an issue specific to my site ? Does the Privacy Report icon have any relevance, and if so how do I switch that off ?
Using :
MS Excel 2010
IE Explorer 8.0
I hate to post this again, but I still cannot figure this out and I haven't gotten any response. I need help folks.
The code below forces a new file to download each time the workbook TEST_CASE_1.xls is opened. I can't seem to get it to kill the _temp.xls file or save the new file (without being prompted "Do you want save"). Any ideas as to what I am doing wrong?
I have a macro to export two worksheets and save as, but the save as part will not work, it just exports to Book1.
Ive checked the directory and everything is fine.
I want the value of a cell in one of the exported worksheet to be included in the save as name.
I'm just wondering if the code needs to somehow specify the worksheet to get the cell value from or will it default to the first worksheet. but either way my code is still not working and i can't tell why.
Should i just create a seperate macro for the save as?
Here is the ...
I have a 'Summary' workbook which collates values from a series of 'sub-workbooks', (and can also update values in those sub workbooks).
the subworkbooks are setup so that when they are saved they also copy certain values out to another 'backup' file.
So there are 2 possible routes that the files will be used in:
1) SubWorkbook opened directly
- User opens SubWorkbook and makes some changes.
- User closes the SubWorkbook saving changes, or clicks the save button. The BeforeSave event opens the "restore" workbook, copies over the key values from the subworkbook, then saves & closes the "restore" workbook.
2) SubWorkbook opened remotely
- User / Admin opens the "Summary" workbook and changes an option.
- The summary workbook opens a subworkbook and makes changes, then saves it. The subworkbook should (as before), then open the restore workbook and save the key values etc.
The problem is in the second scenario the 'restore' workbook doesn't get opened.
I have created a set of 3 workbooks to illustrate the problem here.
Book1.xls = Summary workbook
Book2.xls = Subworkbook
Book3.xls = Restore workbook.
If you open book2 and then save it the 'BeforeSave' event will cause it to open book3 and write the output of 'Now()' to the next free row of book3-columnA, before then closing and saving book3,......
I have a wierd issue. I have this macro for a workbook i use and if i run the macro in the first tab it runs and works fine. When i select the other tab and run it it gives me a debug error. If i close the worksheet save it and reopen it and run it in the other tab it runs fine.
So in otherwords i have to run the macro in the tab desired, save it , and always close and reopen the file to run it in the other tabs. I know the code is correct because it runs flawlessly without errors but i must be missing something.
Also i currently have the macro to run on the active tab/worksheet. Can i have it run on multiple tabs? i have 15 20 and 30 tabs in this example file but in my real file i have many more milage intervals ( some tabs i would not want to select ). It gets tedious having to select one tab at a time, run the macro, rinse and repeat.
For Example Run Macro First, in the first tab. It works perfectly. Go to the second tab and run the first macro. It gives a debug error. If you save the file and reopen it and go to teh second tab and run the macro again it works.
I have a long bit of code that at one point saves a Word document and then saves it again with a new name and the old (legacy) .doc extension.
This all works find when the user is running Office 2007. However, it errors out for using Office 2010. The reference libraries are all correct (as far as I know).
Code:
Dim myDoc As Word.Document
Dim saveAsName as String
saveAsName = "some text here" + ".doc"
myDoc.Save
myDoc.SaveAs fileName:=(saveAsName), FileFormat:=wdFormatDocument
I'm fairly new to macros but somehow i managed to create all the required macros for my project through googling and the like. The problem is that i created my macro enabled excel file in XP and when i transferred it to Windows 7 the auto save to PDF macro stopped working with the Runtime Error '5' Invalid Procedure, call or Argument. The highlighted error is as follows.
ActiveSheet.ExportAsFixedFormat _
Type:=xlTypePDF, _
FileName:="C:WindowsTemp emporaryexam.pdf", _
Quality:=xlQualityStandard, _
IncludeDocProperties:=True, _
IgnorePrintAreas:=False, _
OpenAfterPublish:=True
This auto save is supposed to work when a hyperlink is clicked or when the set time runs out (Working Macro).
My company has files that are already in use. I don't know too many details about how they work, but somehow saving the file will screw it up and my boss has to go back and reset something or other to correct it. Obviously it's connected to some other software somewhere. The code below will block Save and Save-As. BUT how do I get the file to hold onto the code without actually saving the file after the code is added (since the file shouldn't be saved)?
VB:
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
If SaveAsUI = False Then
Cancel = True
[Code].....
I'm using Excel 2007.
Is it possible to know which row code is active on whilst it is running?
s/s is 332324 rows and growing. When I run code which goes down one column and takes quite some time I don't know what stage it is at.
I'd like to be able to see on screen which row it is down to.
Function AH02(FIF, xi, di, zi, nt, TAI, ZMT, xi2, nr)
fit1 = Array(0.1352785, 0.02388504, -0.0007874863, -0.008694193, -0.01137302, 0.0004262445, 0.0001408564, 0.001013715, -0.00004032109, 0.006176128, -0.03644328, 0.001557726, 0.0483096, 0.01859556, -0.0008903489, -0.006407128, -0.001693491, 0.00008581065)
fit2 = Array(0.01184698, 0.01976108, -0.0008787826, -0.03195365, -0.01083098, 0.0005161274, 0.004048458, 0.001013387, -0.00005030517, -0.003262156, -0.003314432, 0.0001453592, 0.005082949, 0.001888962, -0.0000865367, -0.0006340434, -0.0001799523, 0.000008493003)
fit = Array(0.1352785, 0.02388504, -0.0007874863, -0.008694193, -0.01137302, 0.0004262445, 0.0001408564, 0.001013715, -0.00004032109, 0.006176128, -0.03644328, 0.001557726, 0.0483096, 0.01859556, -0.0008903489, -0.006407128, -0.001693491, 0.00008581065, 0.01184698, 0.01976108, -0.0008787826, -0.03195365, -0.01083098, 0.0005161274, 0.004048458, 0.001013387, -0.00005030517, -0.003262156, -0.003314432, 0.0001453592, 0.005082949, 0.001888962, -0.0000865367, -0.0006340434, -0.0001799523, 0.000008493003)
ermess = 0
t = TAI
L = 1
If (nr > 40) Then GoTo 900
10 If (nr < 1) Then GoTo 900
11 L = 2
I have the next VBA-
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("E:N")) Is Nothing Then
If Range("E34").Value = 0 Then
Application.EnableEvents = False
Range("G8").Value = Range("G8").Value + 1
If Range("J34").Value = 0 Then
Application.EnableEvents = False
Range("G9").Value = Range("G9").Value + 1
Application.EnableEvents = True
End If
End If
End If
End Sub
The code don't work. What's wrong with it?
Every time I try to add the contents from the request form to the Master CCO tab, the information does not dump. The only way the form will close is if i hit the cancel button. I don't know what I've done wrong with the add request code.
View 1 Replies View RelatedI got this code off here and it works really well on my home pc which is using widows 2000 however i need it for work and they are using windows 97.
I get an error with the code in red. I have attached the sheets this refers to, and when i run the code it deletes the dates it matches up with in the master rota sheet which it shouldn't
Private Sub Worksheet_Change(ByVal Target As Range)
Application.EnableEvents = False
If IsNumeric(Target.Value) Then
'Clear the Invalid entry
Range("L4").ClearContents
Range("L5").ClearContents
If Target.Address = "$K$4" Then
Range("K5").ClearContents
ElseIf Target.Address = "$K$5" Then
Range("K4").ClearContents
End If
Else
Range(Target.Address).ClearContents
Target.Next = "Invalid Input"
End If..........
However for L28, L29, L48, and L49 the invalid input entry is not showing up properly.
I am trying to add code to a module that is already working. however when trying to add new code i keep on getting error messages. It doesnt like the "next i" see attachment.
all else works except for the WEEK1 tab. I am trying to get it so if the "Date Submitted" colum on the MAIN tab is between 5/3/09 - 5/9/09 it will go to tab "WEEK1"
5/10/09 - 5/16/09 to WEEK2
5/17/09 - 5/23/09 to WEEK3
5/24/09 - 5/30/09 to WEEK4
THe below have written for comboBox selection when I run thourgh form and commandButton code is not working but when run single (Seperately) code will get execute.
Private Sub CommandButton1_Click()
Dim Mydate As Date
Mydate = Date
[Code].....
I have made a program using excel vba with userforms, however upon using it on another or any computer with the same version of Office(2007) i am getting a debugging error and highlighting any lines with the words "format" & "date" in the vba code.
View 3 Replies View RelatedWhy is the following code not running the macro the number of times I type into the box?
Sub Macro10()
'Sub RunABunch()
Dim ans As Variant, i As Long
ans = Application.InputBox("Enter a Number of loops", Type:=1)
If Not IsNumeric(ans) Then
' user hit cancel, so exit sub
Exit Sub
End If
For i = 1 To CLng(ans)
' do your work here
Next i
' Macro10 Macro
'
'
Cells.Find(What:="Chief", After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
Selection.Cut
ActiveCell.Offset(0, 2).Range("A1").Select
ActiveSheet.Paste
End Sub
I didnt write the loop and input portion of the code, I just recorded the macro and added that bit of code from the net.
why my vba code for sort is not working here. When I do F8 it simply passes the sort code (the one in red) with no action happening. Why.? and do I need to do. Thanks.
Sub Macro1()
'
' Macro1 Macro
'
Sheets(1).Copy Before:=Sheets(1)
ActiveSheet.Rows("1:2").EntireRow.Delete shift:=xlUp
ActiveSheet.Columns("C:M").EntireColumn.Delete shift:=xlToLeft
With ActiveSheet
With Range("A1:C10000")
.Sort key1:=Range("B2"), order1:=xlAscending, Header:=xlGuess,_
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
End With
End With
In the EXCEL helpfile, there is an example code under HPageBreaks Property:
For Each pb In Worksheets(1).HPageBreaks
If pb.Extent = xlPageBreakFull Then
cFull = cFull + 1
Else
cPartial = cPartial + 1
End If
Next
MsgBox cFull & " full-screen page breaks, " & cPartial & _
" print-area page breaks"
However, I can't get the code to run. I am consistently getting an error :
Run Time Error "9" : Subscript out of range on very first line of the code. How can one get a subscript out of range with a "For each ... Next" statement ?!!
I cite this as an example, since I am unable to create workable code using HPageBreaks, which I need to...
I'm currently using a vba script to unprotect all of my worksheets within my workbook in order to refresh the pivots and then protect them again once the pivots are completed, but there are two worksheets I would like to remain unprotected in order for users to be able to edit them after the pivots have been refreshed. Now I've tried adding a sub code in order to unprotect one of the sheets as a test to see if it will allow me to edit the worksheet after I update the pivots. Unfortunately the coding isn't working, and the worksheet is still remaining in protect mode. Here's the code I am using to protect the worksheets when refreshing the pivot as well as the code I am attempting to use in order to unprotect the one worksheet.
View 4 Replies View RelatedI have used the below code to make hide/unhide some columns in my excel sheet. It works fine. Now, I need to protrect the sheet except the coloured cells. So I unlocked the cell by clicking the property of the colored cells & then did this :- tools- protection-Protect sheet - protect unlocked cells. But after protecting this sheet the macro code of hiding/unhiding of the columns are NOT WORKING & Errors is coming. I have used the below code:-
View 4 Replies View RelatedThis code is supposed to clear the contents of row 6 cell if the contents of row 5 cell is blank/cleared. I get an error on the "If Intersect" Line. What's wrong?
View 4 Replies View RelatedFreeze Panes Code not working.
Below is the code im not sure whats up with it?