Code Stopped Working - Can No Longer Copy And Save Worksheet
Jul 31, 2012
I have been working on this application for the past couple weeks and I have this module of code that copy's a worksheet into a new workbook and changes everything into values. However I have added buttons onto this sheet and after running the code again it froze the program, in which I had to manually end. It gave an error afterwards however I don't remember what it said. Now everything I try to run or step through it, nothing happens. And I have turned Events and ScreenUpdating on.
I would also like to note that it won't allow me to perform actions like unhide sheets or unprotect them. The code has not been changed either so what has happened to disable all functionality.
I have been working on this application for the past couple weeks and I have this module of code that copy's a worksheet into a new workbook and changes everything into values. However I have added buttons onto this sheet and after running the code again it froze the program, in which I had to manually end. It gave an error afterwards however I don't remember what it said. Now everything I try to run or step through it, nothing happens. I have turned Events and ScreenUpdating on.
What could make this line of code stop working. It has worked for weeks, and just yesterday it stopped working. :x
ActiveWorkbook.Sheets("Email").UsedRange.AutoFilter Field:=2 The sheet is unprotected, and events are enabled. I don't know of anything different than before. What do I look for that would not allow this code to run?
When I copy or cut, I usually get a dashed border around the cells I have copied (or cut), I can then right-click somewhere to paste, but at some point in time recently this functionality has stopped working. The format painter doesn't work either - the paintbrush icon stays pressed for about half a second, then just goes away and I can't paste my formatting.
An operation I often do in excel is to copy a date from one cell, then highlight a few cells elsewhere and press enter to paste the date into them. I also like to right click on a row and Cut, then past it further down my list to re-order things, but this won't work either.
I don't know what I've done to make it go away. If I restart my computer and open a workbook, then I can copy/paste at least once (maybe a few times) then it stops again.
This is caused by a Skype 'click to call' function, but I don't have that installed here. I have actually just tried installing it, so I could run through the uninstall (thinking there might be debris from something previously), but it made no difference.
I recently got a new laptop. I now have excel 2007 and vista. The debug step key, F8, does not work. It toggles out of excel when pushed. If I start the procedure in the debug menu, the SHIFT - F8 will step through though. Is there a setting I am missing? It must have somehting to do with VISTA since in the debug section it says to use F8.
There is only one sheet in this workbook, the sheet name changes each time I run other codes. I am bringing the value of the sheet name into a H1 cell and trying to save with that name.
I have been working on a workbook, and all of a sudden, my keyboard no longer worked in Excel. No shortcuts, no CTRL+C, no CTRL+V, no CTRL+S, no CTRL+A, no F12 to save, no letters, no numbers.... The only button that is working is my ALT key, and I use the other letter keys just fine to navigate after pressing ALT.... But that's it!
I have still been able to work on it because I can still write in Word, and I can still write more code in the Visual Basic window, and I can still click the buttons I create under the Developer... but it's still frustrating to not be able to type a thing in any of the cells, formula bar, or be able to use any of the shortcuts. And now when I tried to close it, I can still select everything else, and I can close this workbook, but it won't close Excel.
Yesterday I needed to install some new software that required at the end reinstalling of Microsoft Redistributable 2005. Not sure if for that reason but now the last line (the SendKeys) is not sending the email automatically anymore. What happens is: -the email message windows pops up but is not being sent unless i do it manually (if i get rid of the two seconds pause ahead of that) -have a VB error message that takes me before the SendKeys line (if I keep the two secs wait ahead of that)
It looks to me that either: -the pc is not active anymore on the email message therefore the SendKeys doesnt work -somehow the instruction finds the "door" shut by something else -worse of all, the software has messed up with those send keys commands (tried to reinstall it but to no avail)
All my macros have suddenly started crashing Excel 2007 when I try to run any one of them. I can record a new macro but even that newly recorded macro will crash Excel.
Service Pack 1 was downloaded and installed by Windows Update two days ago and I had successfully run macros after SP1 was installed.
Today, it's a no go and I'm at a loss as to what may have caused this problem. I have not installed any software lately, other than the Windows updates on patch Tuesday.
This is on a Vista Home Premium machine.
When I try to run a macro, Excel crashes with this info:
I made a spread sheet last year that used various COUNTIF formulas that referenced other cells. =COUNTIF(I40:ER40,"A") It worked perfect.
I copied that spreadsheet to use for this year. I cannot get this formula to work. I have reentered in various locations and forms, but to no avail. If I enter the data and then enter the formula, it works.
However, if I enter the formula first and then enter the data (which I will do over the course of the year) it does not work. I even tried to reconstruct all of this in a brand new spread sheet and it still is not working, although last year's spread sheet still works.
I have some code that copies a worksheet and saves into a new workbook and saves into a specified folder and renames the new workbook.
It is all working fine however it is saving to my desktop and not the specified directory. I know there is a lot similar out there and i have exhausted my google skills trying to find the similar format to the one i am after.
Code:
Sub MonthlyReset() Dim sourceSheet As String Dim clearR As Range Dim newFile As String
I've got a spread sheet at work that is shared between 4 people. It's password protected and its been protected so only four of us can edit it. It was working fine until yesterday for no reason the auto filter stopped working. The drop down arrows are still there but nothing happens when you click on them?
The sheet was made on excel 2003 but one of the users uses the newer excel which we will all eventually get.
This vlookup has been in this workbook for years. All of a sudden any of the cells that have formulas won't work without placing the cursor after the formula in the bar and hitting enter.
1. Pull data from the internet 2. Perform calculations on the data 3. Graph the calculated values
- As I run the macro, Excel dies in step 3, where I graph the calculated values. - It works about 5% of the time and gives me the "Excel has stopped working" error 95% of the time - I can't isolate any difference in the attempts - I've located the area in the macro where it dies, but I can't identify the exact line since it seems to shift around in this area - It works perfectly fine when I step through using F8 - I've attempted DoEvents and Application.Wait to debug. Application.Wait for 5 seconds allows the macro to work about 50% of the time and increases in efficiency the longer I wait - Steps 1 and 2 work perfectly fine (I've used that code in many macros), so I'm pretty sure the issue is in the below code:
I'm running Windows 7, Office 2010
Code: 'Chart variables Sheets("Summary").Select Dim ChartRange As Range
I'm scraping a website for some data using the following program. The program was working as expected until I decided to add a save file element that was a copy paste of some code a friend gave me (attached below). Funny thing is the save file functionality works but now I can't get IE to load the webpage - I get a 438 Error. I'm thinking there's a problem with something in the references menu.
Code: Sub GET_PVI() Dim Days_in_Month(1 To 12) As Integer Dim Name As String
I am attempting to save a workbook when it opens, but when the code is run, it is not saving. For the purposes of finding the problem with the code, I have simplified it down to the following:
Code: Private Sub Workbook_Open() Range("C3") = "HEY"[code]......
I have created several reports containing pivot charts with slicers, pivot tables and data sets. Total file size is around 5MB. Need to do an update in my pivot table Like adding an additional grouping on one of my dimensions. As soon as I start doing so the Microsoft Excel stopped working error message pops up and my file crashes! Removing existing groupings seems for some reason to be impossible as well: nothing happens when I do this. Ahow to solve this without having to rebuild all my reports?
I can't attach the file as it is too big for the site. The file has a front sheet called "Viewer". The filters at the top used to work. They would reduce the results in the table underneath. For some reason this is no longer working.
It uses the lookup tables on the Lookup tab but then uses arrays I think.
I have a macro that used to create a new book for each of the worksheets in a workbook that would name them the same as the worksheet.
Since our company upgraded to Windows 7 the macro, more often than not, fails to work.
The code for the macro is
Code:
Sub NewBook1() ' Set wbSource = ActiveWorkbook For Each ws In wbSource.Sheets ws.Copy Set wbDest = ActiveWorkbook wbDest.SaveAs strSavePath & filePrefix & " " & ws.Name & " " & fileSuffix wbDest.Close Next Application.ScreenUpdating = True ' End Sub
This vba code is supposed to move the cursor to the Cacluate1 command button when the user clicked on cell H6.
Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Target.Address = "$H$6" Then Calculate1.Activate End Sub The only changes that I have made is a change to a private sub worksheet_change(ByVal TArget as Range). Would these changes have anything to do with this no longer working?
Within a worksheet "Page_2" I would like VBA to perform following calculation: IF(COUNTIF(R:R;1);1;2)
Basically, look into column R of worksheet "Page_2" and look if there is in the column at least one number with the value 1, if there isn't show me value 2.
Depending on the value coming out of this function, VBA needs to hide worksheet "Page_3" if the value is 2 and unhide worksheet "Page_3" if the value is 1.
Here is the code which I'm using and that is not working.
Private Sub Worksheet_Change(ByVal Target As Excel.Range) If Application.WorksheetFunction.CountIf(Range("R1:R5000"), 1) = 1 Then Worksheets("Page_3").Visible = True
I've been trying to modify the following code to find the value "Module Index" in column A. I then need the code to save the row number that the value was found in and copy a range from ("A2:V row number")
I keep getting an "object required" error on the following code line
Set intFindrow = wbTargetBook.Sheets(strName).Range("A:A").Find(What:="Module Index", LookIn:=xlValues)
I have a user who is trying to use <EDIT><MOVE OR COPY SHEET> to copy a sheet to an existing workbook. She has them in the same directory and has them both open, but when she tries to copy a sheet from either of them to the other, the only workbook listed in the "TO BOOK" drop down menu is the one she is in. NO other workbooks show up as an option for her to copy to.
The problem I'm having is that the first sheet to be copied is the "Old Data" worksheet and the copy is renamed Oct-01-2009. After that the correct Worksheet is copied and renamed Oct-02-2009 and so on.
I can't figure out why it's copying the "Old Data" worksheet first.
I have a Workbook with around 10 worksheets on, each worksheet is a form.
And when one form is completed we have to save a backup. So i want to assign a macro to a button on a worksheet so when clicked it will save a copy of that worksheet ONLY to a destination and not all the other worksheets along with it.
How to copy the entire worksheet into a new workbook and save the file to a specific directory with the following filename format ("exceptions191011 - ie. the word exceptions followed by today's date in ddmmyy format).
How to add the following condition that if a file already exists with that name then to bring up an error message stating the file already exists? As well as save the new workbook, it appears to close the original workbook - can I stop this?
