I have a macro to export two worksheets and save as, but the save as part will not work, it just exports to Book1.
Ive checked the directory and everything is fine.
I want the value of a cell in one of the exported worksheet to be included in the save as name.
I'm just wondering if the code needs to somehow specify the worksheet to get the cell value from or will it default to the first worksheet. but either way my code is still not working and i can't tell why.
Should i just create a seperate macro for the save as?
I have a wierd issue. I have this macro for a workbook i use and if i run the macro in the first tab it runs and works fine. When i select the other tab and run it it gives me a debug error. If i close the worksheet save it and reopen it and run it in the other tab it runs fine.
So in otherwords i have to run the macro in the tab desired, save it , and always close and reopen the file to run it in the other tabs. I know the code is correct because it runs flawlessly without errors but i must be missing something.
Also i currently have the macro to run on the active tab/worksheet. Can i have it run on multiple tabs? i have 15 20 and 30 tabs in this example file but in my real file i have many more milage intervals ( some tabs i would not want to select ). It gets tedious having to select one tab at a time, run the macro, rinse and repeat.
For Example Run Macro First, in the first tab. It works perfectly. Go to the second tab and run the first macro. It gives a debug error. If you save the file and reopen it and go to teh second tab and run the macro again it works.
I'm fairly new to macros but somehow i managed to create all the required macros for my project through googling and the like. The problem is that i created my macro enabled excel file in XP and when i transferred it to Windows 7 the auto save to PDF macro stopped working with the Runtime Error '5' Invalid Procedure, call or Argument. The highlighted error is as follows.
There is only one sheet in this workbook, the sheet name changes each time I run other codes. I am bringing the value of the sheet name into a H1 cell and trying to save with that name.
I hate to post this again, but I still cannot figure this out and I haven't gotten any response. I need help folks.
The code below forces a new file to download each time the workbook TEST_CASE_1.xls is opened. I can't seem to get it to kill the _temp.xls file or save the new file (without being prompted "Do you want save"). Any ideas as to what I am doing wrong?
I have a 'Summary' workbook which collates values from a series of 'sub-workbooks', (and can also update values in those sub workbooks). the subworkbooks are setup so that when they are saved they also copy certain values out to another 'backup' file. So there are 2 possible routes that the files will be used in:
1) SubWorkbook opened directly - User opens SubWorkbook and makes some changes. - User closes the SubWorkbook saving changes, or clicks the save button. The BeforeSave event opens the "restore" workbook, copies over the key values from the subworkbook, then saves & closes the "restore" workbook.
2) SubWorkbook opened remotely - User / Admin opens the "Summary" workbook and changes an option. - The summary workbook opens a subworkbook and makes changes, then saves it. The subworkbook should (as before), then open the restore workbook and save the key values etc.
The problem is in the second scenario the 'restore' workbook doesn't get opened.
I have created a set of 3 workbooks to illustrate the problem here. Book1.xls = Summary workbook Book2.xls = Subworkbook Book3.xls = Restore workbook.
If you open book2 and then save it the 'BeforeSave' event will cause it to open book3 and write the output of 'Now()' to the next free row of book3-columnA, before then closing and saving book3,......
I have some code that copies a worksheet and saves into a new workbook and saves into a specified folder and renames the new workbook.
It is all working fine however it is saving to my desktop and not the specified directory. I know there is a lot similar out there and i have exhausted my google skills trying to find the similar format to the one i am after.
Code:
Sub MonthlyReset() Dim sourceSheet As String Dim clearR As Range Dim newFile As String
I have a long bit of code that at one point saves a Word document and then saves it again with a new name and the old (legacy) .doc extension.
This all works find when the user is running Office 2007. However, it errors out for using Office 2010. The reference libraries are all correct (as far as I know).
Code:
Dim myDoc As Word.Document Dim saveAsName as String
I am attempting to save a workbook when it opens, but when the code is run, it is not saving. For the purposes of finding the problem with the code, I have simplified it down to the following:
Code: Private Sub Workbook_Open() Range("C3") = "HEY"[code]......
I have been working on this application for the past couple weeks and I have this module of code that copy's a worksheet into a new workbook and changes everything into values. However I have added buttons onto this sheet and after running the code again it froze the program, in which I had to manually end. It gave an error afterwards however I don't remember what it said. Now everything I try to run or step through it, nothing happens. And I have turned Events and ScreenUpdating on.
I would also like to note that it won't allow me to perform actions like unhide sheets or unprotect them. The code has not been changed either so what has happened to disable all functionality.
I have been working on this application for the past couple weeks and I have this module of code that copy's a worksheet into a new workbook and changes everything into values. However I have added buttons onto this sheet and after running the code again it froze the program, in which I had to manually end. It gave an error afterwards however I don't remember what it said. Now everything I try to run or step through it, nothing happens. I have turned Events and ScreenUpdating on.
I'm trying to make a macro check if a file has been saved (ever). If so I want the macro to do a regular save (with already esatablished filename and location) before it proceeds with the rest of the macro. If the file hasnt been saved (if it runs from a new workbook) then I want it to pop up the save.as dialog, so that the user can choose the name and location of the file before the macro continues .
I'm trying to have a macro that opens the save as window, places the name in cell f5 and then allows you to save the workbook with cell f5 as the filename. I have managed to get the save as window to come up and the cell f5 as the name, but when I press save is doesn't. Here is what I have (also, is there a way to direct this to a specific folder).
I have a macro that copy one sheet of the Active workbook and sends it via email.
I need to add a code in this sheet so when one opens it from the email, with a command button to be able to save the file to specific, fixed folder on the local network with it’s original file name.
My spreadsheet has 32 worksheets, I've recorded a macro to do the job "save, save as with specific name", but what I want is, when save as, I wanted the file name increase in one number, and the date in a specific range "H8:J8" the date should be the next saturday.
I am trying to create a macro to run from a form button, within a report, to save a file to a variable file path and name depending on the date value in cell B5.
The format of B5 looks like - 13/08/2014 16:39
The file path has folders for each year in format "yyyy" with each year having sub folders for each month in format "mm".
The file name is just the date only and is formatted "dd.mm.yy" e.g. 13.08.14
I have tried the code below in various permutations but always end up with an error - Method 'SaveAs' of object '_Workbook' failed.
I found several examples on google, but unfortunatly it conflicts with another macro I use for forceing users to enable macros (hide all sheets except one if macros are disabled).
The attached file is an example contaning the save&close code and the show/hide sheets depending on macros enabled.
If the file is opened with macros disabled then only one sheet will be visible. If the file is opened with macros enabled other sheets are visible.
The problem if that this code uses a custom save, witch makes the save&close not save... (in module1 and in ThisWorkbook)
The pourpose of the save&close is to make sure some users don't forget the excel open and thus block access to it. So if a certain idele time passes excel has to save and close without any confirmation messages.
The attached workbook contains a macro ("Transfer_Data") that copies values from one cell to another when the "Update Progress" button (near cell A3) is selected. It works perfectly fine in this workbook but when I try the same code in another workbook, which looks and operates exactly like this one, nothing happens.
Is this due to a security setting or missing code line items?
Below is a code which I added to my 'Quick access toolbar' (and which is based off a hidden workbook). I use this macro to fulfill tasks to regular excel spreadsheets that are not macro enabled, however, I can't seem to get this macro to work for other workbooks. How to modify my code to work for other spreadsheets.
It gives me a error and says my password is wrong. I have user names set to return the password so that it is unlocked for certain people. It works for unprotecting the sheets. I modified it and added it back in to try to do it for the workbook.
[Code] .........
I realize that they " and () around the password are differant, but that's how I last left them. I have tried several combinations and it just gives me more errors saying expected end of statement, etc.
I have this macro which sits in the workbook module:
Code: Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, ByVal Target As Excel.Range) Static OldRng As Range
On Error Resume Next If Application.CutCopyMode = xlCopy Or Application.CutCopyMode = xlCut Then OldRng.EntireColumn.FormatConditions(1).Delete OldRng.EntireRow.FormatConditions(1).Delete
[Code] .......
It's used to highlight the selected/active row.
But, as soon as I run another macro, it simply stops working entirely and I'm left with a row permanently highlighted until you manually remove the conditional formatting. All formats and cell colours controlled in the other macro stop working as well. This is the other (edited for publishing) macro, which is used to send an email, and is found in a module:
Code: Sub Send_Mail() 'this sends an email that sends a text message
Dim OutApp As Object Dim OutMail As Object Dim MyButton As String Dim strTo As String
[Code] .......
I didn't write the first macro so I'm not sure where the problem is? I'm guessing there is something in the code that is stopping it from working (i.e. running conditional formats) as soon as another macro is run? Is that was is happening?
I've got a semi-recorded macro to format a report I run, and towards the end it deals with sorting, subtotalling, formatting text etc. The main function of the macro is to split a large report into several smaller reports defined by whichever manager name appears in the relevant column. The smaller reports need subtotalling by 2 different columns so I have the following macro code :
For some reason this only subtotals by the second column and not the first. I tried swapping them over so GroupBy1 then GroupBy2 but it's still the same. Anyone got any ideas why this might be? I appreciate it's not the smoothest code I could use but I don't know enough about code to do any better.
I've got a column that auto-populates from anther column depending on what's input, and that's working fine. I also have a button set up to select and copy the auto-populated data. I just recorded myself select the top cell and hit shift+ctrl+down to select just the values that are populated. What it does, however, is selects the blank ones too. I know the counta() function would work, but I don't know how to input that into a macro.
The macro I have now is:
Sub Copy() Range("B2").Select Range(Selection, Selection.End(xlDown)).Select Selection.Copy End Sub
I got a problem with a macro i'm working on. I got column D which contains text as "Figures", "Toys", "3DS", "PS3" etc. I also got column N where i need the macro to display "Toys" if it's a toy, figure, etc; or "Games" if it's "PS3", "PS4" etc.
I'm using the following code, to also select only blank rows (so to ignore row 1 which is table header). Problem is that the result shows only "Games".
I'm having a problem with my macro .However, if i use the following script:
[Code]......
If i am correct all the rows with a value less than 1 should be hidden right? However, some rows are hidden when they shouldn't be.
Im working on a quotation with different products in it. And the rows with a 0 in it should be hidden and that's pretty much working. But it also hides some of the subtotals(which i dont want) and some stay unhidden.
I have macro for creating months. Code worked fine, but now I use merged cells in range where days should be created, and code no longer works (Error : "Cannot change part of merged cells").
Tried with unmerging cells, but then code inserts days in shorter range that I need, so code needs to be changed.
i have a worksheet named for example 'allocation 1' this is a master document and is opened and modified and 'saved as' under a customer name. This then stops a few important macros working properly because they refer to the original title and not the new saved title. Is there any code that will let the macro recognise any new title it is saved under?
