Excel 2010 :: VBA Save AS (word Document) Not Working
Nov 8, 2012
I have a long bit of code that at one point saves a Word document and then saves it again with a new name and the old (legacy) .doc extension.
This all works find when the user is running Office 2007. However, it errors out for using Office 2010. The reference libraries are all correct (as far as I know).
Code:
Dim myDoc As Word.Document
Dim saveAsName as String
saveAsName = "some text here" + ".doc"
myDoc.Save
myDoc.SaveAs fileName:=(saveAsName), FileFormat:=wdFormatDocument
View 9 Replies
ADVERTISEMENT
Apr 12, 2013
I have an Excel 2010 spreadsheet which I need to print to PDF. There is a simple "Save as" PDF option which always fails with just the message "Document not saved". I created a simple test sheet with just a few numbers on to check it isn't due to complexities with the particular workbook. This works on my home PC (Windows 7) but not on the Windows 7 Club PC which is where I need to run it to generate the output which eventually will go to the club's website.
It also fails the same way if I try to create an XPS file (although I don't want an XPS file).
This fails from the normal user interface "Save As". I also tried it from a VBA macro and run it: I get Run-time error '-2147467261 (80004003)' Document not saved
I've googled endlessly but all the references I tried failed to uncover a solution. I was a bit surprised that this doesn't seem particularly common and most of the reports seem to be a couple of years old or older (no workarounds were useful).
View 1 Replies
View Related
Sep 28, 2013
Amend this code? I want to save the word document, then save it as a pdf file, then delete the word document;
Code:
Sub E_W()
Dim strDate As String
Dim DirName As String
[Code]....
View 3 Replies
View Related
Jan 21, 2014
I have been working on the following VBA code, which should copy specific charts from excel into specific places in a word-template.
I Am quite new with VBA, so I googled the code, changed a few things, and it works exactly as it should - except from one thing. When the Word-document is loaded from the template, I would like the document to be "saved as..."
Instead of just opening the template. I have tried
Code:
.ActiveDocument.SaveAs Filename:=fname & ".doc"
The code is as follows:
Option Explicit
Sub EksporterTilWord()
Dim appWrd As Object
Dim objDoc As Object
Dim FilePath As String
Dim FileName As String
[Code] ...........
View 1 Replies
View Related
May 5, 2006
I am using a module to create and save a Word document from an Excel module. I'm using the following line to save the document which works fine but (and this is a big BUT)(to quote a TV programme from long ago) obviously everytime I save the document it will overwrite itself. Is there a way of adding the date it is saved on to the file name so it creates a new document each time.
objWordDoc.SaveAs Filename: = "WAGReport"
I have tried changing it like this but get an error message
Dim dtMyDate As Date
dtMyDate = Format(Date, "DDMMYY")
dtMyDate = Sheets("Client Master").Range("d2")
objWordDoc.SaveAs Filename: = "WAGReport" & dtMyDate
View 3 Replies
View Related
Aug 27, 2010
I'm trying to create Word documents (letters.doc) from Excel fields.
I already created bookmarks in Word and have the same Titles in A Row in Excel 2003 and I have tried the following threads:
Add bookmarks to Word from Excel Inserting data values from Excel into a Word doc using bookmarks
But I cannot manage it properly. I know that I need the code that goes on the lines of
Set WdApp = CreateObject("Word.Application")
rather than Set WdApp = New.Object
I cannot get Word to open a document! =(
It's basic letter creation, First_Name, 2_Name, Address_1, Address_2.. These have been bookmarked in Word and have exact same Titles in Columns A-D
View 9 Replies
View Related
Feb 20, 2014
I have an Excel spreadsheet that contains information for a Word document. It uses an elaborate macro to "substitute" unique codes in a starter document. At completion of the process, it goes through and delete all unused codes
The problem is that the codes are preceded by a "bullet" symbol.
How can I remove that orphaned bullet symbol. If the code is ". CtlCode10" (where the . is a bullet), then ALL need to be removed
View 2 Replies
View Related
Mar 30, 2014
I'm trying to copy parts of a worksheet from excel 2003 to word 2003. I've found code that does this alright but I need to be able to re-size the the pasted data to fit the word document. Is there a way to set the properties of the word document like change it to landscape and move the margins etc? Even a simple "reduce the table size to fit the word document". I've included the code i've got already. This code will open up a word document and copy your cells into it but without any useful options. So its ok for a small group of cells.
View 1 Replies
View Related
May 31, 2014
I'm trying to copy the content of a word document (File A) to another (File B) using Excel VBA. File A has about 100's of pages (not sure of the number as it varies) and this needs to be split to different files, each having 15 Pages.
Below is my code, where I'm able to select the content of the first Page and paste it in the target folder, but not sure how to determine the number of pages in word using excel VBA.
Note: Copying the content should be done, page wise only.
[Code] .....
View 1 Replies
View Related
Feb 15, 2014
I have word document. It has numerous feedback and review comments. I want them to be exported to excel work sheet in a specific column with the name of the feedback and comment provider in an other column.
View 2 Replies
View Related
Apr 8, 2009
If possible could someone please tell me why the below code is not calling the normal.doc macro "testy" and any solutions.
The code opens a new document, pastes the text from the clipboard and then fails to run the wanted macro.
View 6 Replies
View Related
Oct 14, 2011
I am currently using MS Office Excel 2007 and my limited VBA knowledge has put me at a stop of a project that I have been working on. I am trying to create an excel template that will open every word document in a specific folder and pull data located in the title of the document.
For example, I want the spreadsheet to open every document and pull info from the title that would look similar to this:
"line of business";"policy #";"dollar amount";"name";"line of business" and etc.
The semicolons in the title would partition the data across a few cells.
Below is the coding that I currently have, This is my timestamp. Column A adds a timestamp whenever data is entered into the corresponding cell in Column B. Because of this, I need data to be pulled from Word documents and inserted into Column B.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim Rng As Range
For Each Rng In Target
If Not Rng.Value = vbNullString Then
Select Case Rng.Column
[code]....
Below is some coding, but not very specified to my specific needs.
Sub SplitValue(Rng As Range)
Dim avarSplit As Variant
avarSplit = Split(Rng.Value, ";")
Range(Rng, Rng.Offset(, 4)).Value = avarSplit
If Left(Rng.Value, 2) = "RE" Or Left(Rng.Value, 2) = "FW" Then
[code]....
Also not sure if the word document is to be pulling information from the title, if I would need to negate ".doc" from data being imported.
View 2 Replies
View Related
Mar 6, 2010
I want to take data from an Excel 2003 Worksheet as shown below:...
View 9 Replies
View Related
Jul 5, 2013
I am looking to take information from a document emailed to me in word and then populate the specific ranges in my excel spreadsheet for invoices. What is the best method for doing this and how can i control where it comes from the position in the document and the range is going to.
View 1 Replies
View Related
Jan 6, 2014
Part of my work involves the transfer of thousands of lines of Excel data into FileMaker and then exporting this data to Word where it is finally formatted for publication. What I'd ideally like is to skip the FileMaker step and simply have it so that I import all the data from my Excel file into a Word document in one swoop. The problem is that the eventual export can't feature tables, it would be the icing on the cake for the data to remain as formatted, and the data needs to read line<space>line<space>, vertically.
Essentially, I need to know how to take this from Excel ..
this1.jpg
And turn it into this in Word ...
this2result.jpg
View 4 Replies
View Related
Jan 25, 2010
Currently I am going back and forth between an excel document and a word document cutting and pasting values from the excel spreadsheet into tables in word. The task is a regular occurance therefore I wish to create a Macro that can automate this procedure. Both the excel and word documents are fixed templates therefore once a Macro is created it can be applied to all future work of similar nature.
Each table in the word document contains 6 rows of values in a single column. The excel data is arranged in a table that is 6 rows by x number of columns (how ever many sets of values there are for the particular job) therefore x determines how many tables must exist in the word document. I move between the excel and word document cutting and pasting each column into each table. This is not so time consuming if x=10 however on occasion x=100+ and it does take time.
View 8 Replies
View Related
Apr 16, 2012
How to write a code to import all tables from a single word document into a single excel sheet? (we don't know exactly how many tables there will be,or how many rows in a table there will be , but the columns are certain, which is 9, from A to I.
View 4 Replies
View Related
Jul 17, 2014
I'm trying to get certain Excel cells (varies by column and row) to populate different areas in a Word document. I've tried using both Word bookmarks and form fields and have defined the Excel names with the Word bookmark names as well as using Word's generic terms (Field1, Field2, etc.) with no luck. The VBA code I'm using now is for word forms and will open the Word document but seems to delete the form fields. I don't know if I'm not coding the cells correctly or what.
Sub CreateProposal()
Dim wdApp As Word.Application
Dim wdDoc As Word.Document
Set wdApp = CreateObject("Word.Application")
' Open word document
[Code] ........
View 3 Replies
View Related
Jul 22, 2014
Let me start by stating that I am a novice at writing macro script. I am trying to write a script that will open and search a Word doc, find specific text in that document, and populate certain excel cells with that information.
Ex. of Word doc:
5.1.2.3 Install gasket [12], using bolt [5] and nut [8].
5.1.2.4 Uninstall gasket [12] and scrap gasket and fasteners.
I would like the script to search for and populate any number between the [ ] into a specific excel cell, also I would like it to identify and populate an excell cell with the associated step, e.g.: "5.1.2.3", which will be at the begining of that step (step could be several sentences long). Also, I would like the script to look for and identify/populate an excel cell with any number of words such as: "install", "uninstall", "break", "scrap", or "remove" also associated with that step.
View 1 Replies
View Related
May 26, 2006
I have an excel program that is supposed to count word instances in a word document. I can't seem to find the right declaration for a word document.
For example to declare a workbook in excel its
Dim wb As Work Book
I've tried
Dim doc As Word.Document
'or
Dim doc As Word.Application
as shown in some of the forum posts, but an error user-type not defined keeps displaying.
View 2 Replies
View Related
Jan 28, 2011
I have a macro set up in Excel that formats and deletes rows matching a citeria. Once the macro runs I then manually copy the data across into Word. I would like to automate this.
I would like the macro to copy over any cells containing data iinto a new word document. I also have standard text that I would like to include at the beginning and end of the word document. With the excel data being placed in the centre.
I have searched the web and tried a couple of macros with no luck. All the macros state "' requires a reference to the Word Object library: ' in the VBE select Tools, References and check the Microsoft Word X.X object library"
I am unsure how to reference this - but I have checked and found that the object library ticked is Microsoft Word 11.0 Object Library.
View 1 Replies
View Related
Jan 23, 2014
All I want is to generate a word document with built in word header and footer (header and footer style name is "alphabet") based on the values which i mention in excel(path,word file name and header content.
View 1 Replies
View Related
Jun 18, 2012
I need to generate a microsoft word document from the data encoded in my excel spreadsheet. I am currently using MS office 2007.
in the Excel Spreadsheet from columns C to F "a) b) c) d)" was not typed but in the word document it automatically appears before the choices encoded in excel. Another thing is that some of the choices typed in the excel spreadsheet are in bold font and I want it to be generated in word document with the bold font as well.
By the way I am planning to use this technique to create a 100 item multiple choice exam for my students as I find using EXCEL to generate the document a lot easier than creating the test manually in WORD.
View 1 Replies
View Related
Mar 14, 2013
How do I add a password to protect the PDF that I create from my excel 2010 document?
View 5 Replies
View Related
Mar 21, 2013
I have a problem concerning sending an active word document via mail. I have a worksheet with various information in it, that I am exporting to a word document. I then want to send the word document via email. I want to do this without saving the changes in the word document. I am working with excel 2010. I have posted some of my code below.
VB:
Sub letter()
Dim myWord As New Word.Application
Dim adr As Variant
[Code]....
I get the following errormessage: "Compile error. Wrong number of arguments or invalid property assignment"
View 2 Replies
View Related
Jun 30, 2014
In my Excel 2010 workbook I wen through File > Info > Check for Issues > Inspect document. But as it's shown following, it doesn't show anything. Why?
Capture.jpg
View 5 Replies
View Related
Nov 23, 2011
Have very recently been upgraded to Windows 7 with Excel 2010 at work. On printing out a 10 page doucment, (all of which are landscape format), when vewing print preview, the first page is previewed as landsacpe, but subsequent pages are portrait.
If you change format of 2nd page to landscape all subsequent pages switch to landscape.
Have looked at a similar format document created last month and it behaves exactly the same. Whole document landscape but on print preview only first page is...
View 3 Replies
View Related
Mar 11, 2014
am using Excel 2010 and having issues trying to save a worksheet to a specified file location with the save date....
I have tried several posts form this forum and elsewhere and can't seem to get the macro to do what I want.....
I want to save a 'worksheet' from an open workbook that I use for updating information to the same file path as the workbook with the date the file saved...
View 6 Replies
View Related
Oct 2, 2012
Excel 2010, Windows 7: Is it possible to password protect an Excel document at an "Administrator" or a executive level. I want to grant access to the document, and the ability to manipulate it as they choose, to everyone with the password but prohibit them from changing the password once they are in.
View 1 Replies
View Related
Jul 6, 2009
Is it possible to export Excel cell contents to Word fields in a protected Word document? For example...
What code would be needed to tell Excel to open up, copy and export the contents of A2 in the active sheet of a workbook to "Field 2" in a Word document named "Report 01" and then put the contents of B2 to "Field 2" etc?
Do both applications have to be opened up at the same time or is Excel able to open up Word on its own? Will the macro be able to....
1. Automatically open up the correct Word document?
2. Look ONLY in a certain folder for the "Report 01" Word document?
or
Bring up a "selection" box that allows you to select the document you wish Excel to export it's data to?
3. Close and save the Word Document without any user intervention?
View 2 Replies
View Related
