Using Excel 2003.
I have a hyperlink from cell M2 in a worksheet to cell B2 in another worksheet. I typed the cell reference on the target worksheet as B2. this works fine. The problem is that when I copy/paste the hyperlink down the column, the reference cell stays at B2. I need the reference cell to change when copied down to B3, B4, etc.
I have an Excel 2003 file that contains hyperlinks to OneNote notebooks on a Sharepoint site. An Excel macro looks for these links and determines the full hyperlink address which is then assigned to a variable. An Outlook message is generated which includes the hyperlinks.
The hyperlinks work in the Excel file. I can also copy them from OneNote and manually paste them into an Outlook message and they work. However, when I obtain their full address and transfer that to the email through code, the links do not work. The hyperlink address from OneNote starts with "onenote:http" which is not recognized as a link.
If I can do this manually, there must be a way to do this with vba. Are there characters I need to include in the OneNote hyperlink address to make this work? Is there another way to transfer the working link from Excel to Outlook?
I am trying to attach a hyperlink to a command button in excel 2003. I open the control toolbox, select command button and place it on the worksheet. with the button selected and in design mode I click on the hyperlink button on the toolbar and allocate the hypelink address. Click on the button and it works fine untill I exit design mode then the button stops working.
View 8 Replies View RelatedHow do I create a hyperlink in an Excel 2003 file that will open a PDF file with Reader?
I have an Excel file of hundreds of Customer names and invoice numbers. I have a directory of PDF files. The name of each PDF file is the customer name, a space, and the invoice number. I should be able to have a column in the Excel file that contains a formula that creates a hyperlink to open the corresponding PDF file.
I used the HYPERLINK function and built the path and file by concatenating information. When I click the hyperlink, I keep getting an Excel error: Cannot open the specified file.
Do you think this problem is something of my own doing or some "undocumented feature" in Excel?
I would like to add hyperlink to multiple JPEG images (separately) in Excel 2003 and send those images via email to another person. On receiving the mail at the opposite end, the person concerned should be able to view the images by clicking the link. How to do?
View 1 Replies View Relatedi have a macro that opens 10 other workbooks and copies cells onto a "master" workbook. Until recently, everything worked fine. Suddendly, while it opens the 9 books and copies as it is expected, but when it opens the 10th wb, the macro breaks at a very simple copy/paste.
The weirdest thing is that after it breaks, I cannot select any cells neither in the opened wb nor in the master wb. This continues even after I press the "reset" button in the vba. So, I am only able to select objects (text boxes etc) in my wb and not any cells.
Also, the "arrow" icon on the design toolbar is not active. And I've tried pressing and de-pressing the F8 key, but I still cannot select any cells.
I have option explicit in the beginning of my macro. And i'm using excel 2003.
How to amend existing code in a workbook that is used by many different users. I am working in Excel 2003. The existing code copies data from certain cells in the active worksheet (which is password protected) into a new worksheet and saves that new worksheet to a temp folder, sends it to a particular email address using outlook and closes it, returning the user to the first workbook. You will see that it also unhides then rehides columns of the first worksheet during this process so that the user never has to see them. Problem here is that none of the users are using outlook anymore and I would prefer that this new spreadsheet that is created just be saved to the users desktop. I have found bits and pieces of what I needed on the web, but I can't seem to put it all together (I usually end up being sent to the debugger just short of having the newly created spreadsheet saved to desktop). Here is the existing code:
Private Sub CommandButton1_Click()
Range("A2:G2").Select
Selection.ClearContents[code]....
Essentially what I need to do is circumvent the whole email bit and save the spreadsheet that is created to the users desktop instead of a temp folder.
I've added some code the adds a button to a worksheet
Public Sub AddSheetPrintButton()
Dim btn As Button
Dim t As Range
Set t = ActiveSheet.Range(Cells(1, 6), Cells(1, 7)) ' button position
Set btn = ActiveSheet.Buttons.Add(t.Left, t.Top, t.Width, t.Height)
With btn
.OnAction = "sheetPrint"
.Caption = "Print Sheet"
.Name = "Print"
.Font.ColorIndex = 10
End With
End Sub
This works fine until the workbook is shared!
I have a workbook that has multiple functions. One of these function is that when the user select a key word from a drop down validation list, a VB code transfer all information from that row from Column A to column W to the next available row on another tab.
VB:
If Not Intersect(Target, Range("X:X")) Is Nothing And Target.Cells.Count = 1 Then
Application.EnableEvents = False
If LCase(Trim(Target.Value)) = "yes" Then
[Code] ....
Is there a possibility to transfer this information into another workbook. Instead of transferring the info to a tab name "Archives" to transfer in another workbook. This workbook will only have one tab called "Archives".
This will minimize the information within my Initial workbook in project.
The path in the new workbook where the information should be transfer should be in:
"C:Documents and Settings"username"My DocumentsMy Data Sources" to an excel workbook that will be named Archives.
I know that the "Archives" workbook need to open then close after the information has been inserted...
The other day I inserted a row in a shared workbook and then saved it. On my screen, the inserted row was visible and was the correct row height of 12.75. My goal was to insert the row so another user sitting next to me could enter information in the new row.
After I saved the workbook, and after the user sitting next to me saved her workbook, the row I inserted should have appeared exactly the same on her screen, but it did not. Instead, the inserted row showed up as a hidden row on her screen. It was there, but the row height was collapsed to the point of invisibility.
I repeated my attempt to insert a row which the other user could edit several times, but each time I got the same result. I could not make the row show up on her screen with a row height of 12.75.
Shared workbook in Microsoft Excel 2003?
I have a group of Excel (2003) template files, each with a different name. When these files are opened they ask for certain information and save themselves as a unique name. Within these files are VBA routines and functions and, because these files basically do the same things, they have the same name. These routines exist in their own unique modules each with a different name. Unfortunately, in these files there are differences in the number of columns of information these routines act on so once they have been saved I need them to only act on their own columns only.
My problem is, when I have more than 1 of these files open in the same instance of Excel, I try to run a file using a control letter combination Ctrl-e and it sometimes runs the version of the macro in the wrong file. This leads to all kinds of strange thing happening. What I can do to force the correct macro to work in all instances?
I'm new to this forum and to VBA
First-off, I'm using Excel 2003 SP3.
The setup: A software application I regularly use produces csv data files (in this case approx 300 files). These I have converted to xls format using a separate macro. The files are in one folder and named as follows eg
G1 18800.xls
G1 18802.xls
G2 18975.xls
G3 19881.xls
G3 19990.xls
G5 19990.xls
etc
The files contain the following data:
DATE TIME VALUE STEPS EXCL ACCEL
01-Oct-03 08:00 0 0 FALSE 0
01-Oct-03 08:01 0 0 FALSE 0
01-Oct-03 08:02 0 0 FALSE 0
01-Oct-03 08:03 0 0 FALSE 0
01-Oct-03 08:04 757 20 FALSE 0.18
01-Oct-03 08:05 1714 32 FALSE 0.44
01-Oct-03 08:06 1524 32 FALSE 0.39
01-Oct-03 08:07 1665 45 FALSE 0.47
01-Oct-03 08:08 1644 42 FALSE 0.46
01-Oct-03 08:09 263 8 FALSE 0.06
etc
I then created a macro using code I sourced from the internet, and included some addtional commands (filename, copy/paste). See below. This macro opens the all the xls data files in the folder and copies the relevant data to an analysis workbook [Analysis sheet, Results sheet, Master sheet] ie the data is copied from the data file and pasted into the Analysis worksheet. Then the results are copied from the Results sheet to the Master sheet. So far so everything works.
My problem is this: I'm stumped at how to delete rows from the xls data files before running the analysis workbook and macro. In other words, after converting the csv files to xls format I need to clean the xls data files.
I have a separate xls file with criteria data in two columns:
FileName Date
G1 18800 06-Oct-03
G1 18801 02-Oct-03
G1 18801 03-Oct-03
G1 18801 05-Oct-03
G2 18795 14-Oct-03
G2 18795 15-Oct-03
G2 18795 16-Oct-03
G2 18795 17-Oct-03
etc
The rows in a particular data file, with dates that are not present in the Criteria workbook must be deleted. This to be done for every data file in the folder. Also, I need to exclude rows for specific time periods eg 12H00AM - 04H00AM from all the files irrespective of date.
the code needed [should a separate macro be run or can code be placed within the present macro?]. I've tried looking for something similar on the internet, but my requirements seem too customized to be able to adapt the code that I found. And of course this is waaaay above my present skill level!
Option Explicit
Sub CopyPaste()
'This code opens up data files (xls) in a specified folder and copies data A1:G17281 to an Analysis workbook (Analysis sheet).
'The data from the Results sheet is then copied to the Master sheet.
Dim wkbDest As Workbook
Dim wksDest As Worksheet
Dim wkbSource As Workbook
Dim wksSource As Worksheet
Dim MyPath As String
Dim MyFile As String
[Code]...
I have attached a workbook (excel 2003), I have few userforms in it.
I tried to copy data from all the tabs in the workbook to "Master" tab but getting an error.
You have to login to file details are as below:
Copy over data from different workbooks and using paste special values to paste it into a new workbook using a macro. Here is what I have and what I am looking for:
My file path is
C:Documents and SettingsMy DocumentsProjectCostsDecember12
In this folder I have workbooks called:
Function1
Function2
Function3
In each workbook I have 4 worksheets
Cashable12-13
NonCashable12-13
Total12-13
GrandTotal12-13
I also have a workbook called DecMonthlyTotal in the same folder with the same named worksheets.
I am looking for a macro to be placed in the DecMonthlyTotal that will pull the data from the Cashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name Cashable12-13, it will also pull the data from the NonCashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name NonCashable12-13
Both the Cashable12-13 and the NonCashable12-13 have Columns A - G The row that the macro should start the copying from is Row 3 for each of the workbooks; however I don't have an end row for the workbooks as this will vary.
I am using Excel version 2003.
I have a workbook with many tabs and within those tabs there are many hyperlinks to other areas within the same workbook. When I add or delete lines or rows, the corresponding hyperlinks do not stay with the changed cell. Is there any way to make the cell reference in a hyperlink an absolute similar to how you do with a formula?
View 2 Replies View RelatedI've been trying without success to hyperlink a shape in one workbook that refers to a website contained in a second workbook cell.
The hyperlinked shape is in the current workbook and the website address is in a workbook called "data source.xlsx", sheet 1, cell A1.
My last attempt was this - ('C:UsersLouiseDocumentsMA[data source.xlsx]Sheet1'!A1)
Is it possible to do hyperlink to a specific cell in one of the tabs of another excel file? I managed to link to another excel but can't make it go to a particular cell.
View 11 Replies View RelatedI need to match data in cell A to cell B and then if they equal I need to copy the adjacent cell C to cell X . How do I set up a macro to do this automatically? I have over 5000 cells to compare and match up.. I have Office 2003.
View 7 Replies View RelatedI want to create a hyperlink from an Excel cell to a worksheet tab. Problem is, the tab name changes frequently. The good news is I have a cell that displays all my tab names and automatically refreshes. How can I create a hyperlink that will like to the tab based on the value in that cell?
View 1 Replies View Relatedhow can I copy and paste only the hyperlink of one cell to the other cell with the same worksheet or workbook? I am using Excel 2010.
View 9 Replies View RelatedI have an expense report, which was originally done in Excel 2003. It still prompts users to open as read only however if they select no, they are not prompted for the password, and it has allowed them to save, so when the next person opens it, they have the previous person's report instead of the clean workbook. I have tried everything to put a password onto it. I know this is really basic stuff, but maybe I am missing a step? I want the end user to be able to make all the changes they want in read only mode and then do a save as, but if the select No when prompted "Open as Read-only?" they should have to put a password in.
View 4 Replies View RelatedI am using Excel 2003.
It’s been working perfectly up until around an hour ago. However, now when I close Excel, I get compile errors.
These compile errors seem to be because Excel is trying to access controls in the workbook after it has closed. Since the workbook is closed, VBA can no longer ‘see’ the controls, and therefore it thows up errors.
I’m also getting a similar error on a Worksheets("DataExplorer").unprotect line, which seems to be because the worksheet isn’t there after closing.
These errors only occur when I close the whole excel application using the big cross in the top right. If I just close the workbook (using the smaller cross just below the big cross in the top right of excel), it doesn’t throw up these errors.
Just to clarify: all of the code runs perfectly when Excel is open. The errors are being thrown up for lines of code which run without problem until Excel is closed.
Excel 07
I inserted a hyperlink into a cell that goes to a web page. It works when the sheet is NOT protected, as soon as I protect the sheet it stops working. How do can I lock the workbook and that cell so nobody can change it but the hyperlink still work?
Using Excel 2003, is it possible to use 2 sumif functions in one cell?
i.e., sumif and sumif
I am using Excel 2003 at work.
New cases are entered on to the spreadsheet. The case remains open until a closure date is entered, at which point the case is closed. What I need is the following:
Cell A3 = should say "Open" if there is no value in cell Y3
Cell A3 = should say "Closed" if a date or any value is entered in cell Y3. Ideally it should only say "Closed" if a date is entered in format xx/xx/xx, but am flexible so that it says "Closed" if any data is input.
At the moment Cell A1 has a drop down list consisting of open and closed. I will remove this if it causes complication.
i'm using excel 2003 and i'm trying to mark 7 cells in a row by conditional design by one of the cell
example : if the date on january? mark all line in yellow, for february mark in red and ect
A B C
528602545 assafsarit@walla.com 01/01/2013
527271005 eti_sh6@walla.com 01/01/2013
[Code] ...........
We have a query, that looks at an external data source (db2 i believe). It will pull all data under a certain product set, and as an additional Criteria we currently have Serial Number.
Now, if the value entered is the serial number, lets say '1234567' for example, it will happily pull all instances of that into the table.
However, what I would like is a cell where I can enter the serial number, and the query will look at the Criteria, the Value will reference a cell (where we can type any serial number), and it will then populate it! I thought that would be fairly intuitive even for a complete novice like myself - now I am likely to have nightmares about Function Errors!
What I have tried:
*Setting the value to a cell ref... ie instead of '1234567' i have set the value to =$a$1 and in that cell i have a serial number.
*Tried to create a parameter. So value of [Serial Number] I then get a prompt saying "Enter parameter Value (serial number) - Regardless of if i type a cell reference (ie =$a$1, or i input the actual serial that worked before when it was '1234567' I still get a function error!
I keep trying different permutations of things, but I am ill prepared.
I have to file an insurance claim due to a fire in my home. I have a folder with .jpg photos located at C:InsClaimOnlinePhotos . Im working with Excel 2003. I am trying to put the picture of the damaged protery in Column A on the same row as the detail about that damaged property using the ActiveSheet.Pictures.Insert function. The name of the picture is located in Column B. There are multiple sheets in the Excel book and each contains from 10 to over 700 rows. I would like to run the macro based on the active sheet to add the pictures one sheet at a time. I would like the pictures to be about 1.2" High by 1.6" Wide and be actually be within the cell of Column A of the row where the detail information is located. I have played with writing my own code, pieces of others code and full code sets I found in the Forum. Nothing works. Below is the best I found so far but, it uses Column C for the placement of the pictues.
When I try to run the below code I get Run-Time Error "1004" "Unable to get the insert Property of the Picture class".
I'm not sure if this code should work in Excel 2003 or not.
MS Word allows a person to turn off email addresses so that you have to press the Ctrl key then left click the mouse. This makes sure that every time a person touches a cell that it does not automatically load that address into Outlook. Is the same possible in Excel 2003?
View 3 Replies View RelatedTrying to isolate the second number in cell.
If I have 48X144X68 in J10, I need 144.
I tried:
=MID(J10,FIND("X",J10,2)+1,3) which works, but when a cell has 65X50X68, then I get 50X where I only want 50.
The numbers can vary in size (i.e., 1 to 5 digits) but always separated by an X or some letter.
Excel 2003