I'm trying to find the first empty cell in a column on one sheet, then insert the value in the adjacent cell to the left into a cell on a different sheet,
using this formula:
=offset((LOOKUP(1E+307,'[PO Log.xlsx]PO Log'!B:B)),0,-1)
But I keep getting an error popup.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I am running this macro or some variation of it, depending on the column I need the time entered into:
Sub MacroD()
Dim LR As Long
LR = Range("D" & Rows.Count).End(xlUp).Row
ActiveSheet.Unprotect
Range("D18:D" & LR).Value = Now
ActiveCell.Offset(1, 0).Select
UserForm1.ListBox1.Text = "Time"
UserForm1.ListBox1.SetFocus
' UserForm1.Show
End Sub
When I need to run the same macro again (say I've run Macro D once, and now I need to run it again to get the next time), the forumla overrides the previous timestamp. I need the macro to find the next empty cell in column D and enter the timestamp there.
Sheet1 *ABCDEFGHIJKLMN15Major EventMajor Event Clock TimePUSH#########SPREAD########OUT FWD########REV########OUT REV########Delay########1617Start10:55:09*10:55:27 *10:56:24 *10:56:26 *10:56:19 *10:56:28 ####10:55:59 18W-U10:55:180.40010:56:23 0.01710:56:24 0.03310:56:26 0.01710:56:27 0.01710:56:28 0.03310:56:30 19MTT10:55:26######*0.000*0.000*0.000*0.000*0.000*20**0.000*0.000*0.000*0.000*0.000*0.000*21****0.000*0.000*0.000*0.000*0.000*> Excel Jeanie HTML 4
I want to use the Find method to find an empty cell in the first column. But at the top of the data taqble, there are some empty cells, so I don't get the one I want. So I thought about searching in the column 1 excluding the first cells. Here is my
Dim rFoundCell As Range
Dim rFilledCol1 As Range
'I define the column excluding the cells that contain empty cells
rFilledCol1 = Columns(1) - Range("A1:A10")
Set rFoundCell = rFilledCol1.Find(What:="", After:=Range("A11"),
LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False)
But I get a Syntax error. Do you know why?
I am trying to find code that will find the first empty cell in a row and add data in cell left to right. This code is filling all data in the last cell of the row and I am hoping to have it loop through data and fill the first empy cell (M1) and next data placed (m2) and so on
Sub Reportdates()
Dim Grid As Range, Gridcell
Dim Crit1 As Range
Dim Crit2 As Range
Set Grid = ThisWorkbook.Worksheets("sheet3").Range(" dates")
Set Crit1 = ThisWorkbook.Worksheets("Stageing").Range("J1")
Set Crit2 = ThisWorkbook.Worksheets("Stageing").Range("K1")
For Each Gridcell In Grid
If Gridcell.Value >= Crit1 And Gridcell.Value <= Crit2 Then
ThisWorkbook.Worksheets("Stageing").Range("M1").End(xlToRight).Offset(0, 0) = Gridcell.Value
End If
'Exit For
Next Gridcell
End Sub
how i can go about finding the next empty row (and select the first cell of that row (column A))? edit: It probably should be noted that there are cells in Columns A through P. There are rows where all and/or just one cell contains data per row. So i cannot use a " lookup" based on a single column.
View 2 Replies View RelatedI'm trying to create a macro that when run, scans Row 12 (only after column E), Finds the first empty cell, then inserts the cell value from Sheet4 CellE8. Then the hard bit begins. I need it to insert cell info in all the cells below it, from different locations...
For example
A
B
C
D
[Code].....
In the above sheet, I need it to go to cell D2 and insert the values from Sheet4 CellE8, Then proceed to D3 and insert data from Sheet3 D4, then to cell D5 and insert data from Sheet1 A7, etc etc
I dont mind doing each cell individually, but they will always be in the same column (and row 2 "Value" will always be the one that determines the next empty column).
I have a spreadsheet and in column D, I have look up formula which looks up value from another tab. What I want to do is if the look up finds #N/A or blank cell. There should be a message box appear warning that all the cells in column D might not be updated properly.
View 4 Replies View RelatedI want to do is add data into Sheet A each day then press a button which will copy the data in a range and paste it into Sheet B, but I want to create a list of all data so I need it to find the next empty cell and start the paste from there (if that makes sense).
I want it to create a data base on one sheet from a daily import, I have a code to copy one cell to next empty cell but dont know how to duplicate it to a range.
I hope I have given you enough info this is what I have done so far
Public Sub CopyData()
Dim ws As Worksheet, bi As Byte, vData(1 To 1)
Set ws = Sheets("A")
For bi = 1 To 1
vData(bi) = Application.Choose(bi, ws.Range("A1"))
[Code]....
I know how to find last not empty row in a column, but how to find last not ampty column in a row using below formula?
Code:
myRange = Sheets("Main").Range("A4:A" & Sheets("Main").Range("A4").End(xlDown).Row).Address
lastFund = Sheets("Main").Range(myRange).Rows.Count
I am trying to create a macro so that when i save an entry the form sheet looks in the tavela master sheet to see if there is a match on the record number (in the A column) and saves there as an update if it matches and then if there is no match, saves it in the last empty row. this is a column to row copy so it has to be paste special to transpose. also i have a password on the sheet which i use to unprotect then reprotect. i have successfully done these two things separately but cannot combine them! i know not very much about visual basic code just what i have read here and so i am trying to make this code work.
Code:....
In the attached table I found the Last Column and Row which non empty cells in a range.
But I need to find the first column and row which non empty(filled) in the range .
i want to find all the empty cells in column M & N within the data range and input formula into them. How can i make it to input the formula only within the data range (maybe can take reference to data in column E, only when there is data in column E then empty cells in M & N will input with formula)
View 7 Replies View RelatedI'm trying to write a program for work. One sheet (whereiseverything.xls) will have a list of parts column E and where it is in the process column (k). Column E of this sheet will have multiple part numbers. (Sometimes duplicated.) I would like to figure out how to write a code to Auto filter (whereiseverything.xls) sheet and copy only one P/N from (whereiseverything.xls) column E onto another Workbook Worksheet (Commit status.xls) column. After that the sheet must copy all of the locations of that P/N from whereiseverything.xls column K into and under the P/N of the Commitstatus.xls.
It will continue to autofilter and copy from where is everything, the "one" p/n and all of its locations into another empty column of Commitstatus.xls until it no longer has part numbers to autofilter on whereiseverything. I am extremely green on VBA programming but here is my first attempt.
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Columns("D:D").Select
Selection.AutoFilter
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Selection.AutoFilter Field:=1, Criteria1:="7516113-905" \<--this Is one p/n
Columns("J:J").Select
Selection.Copy....................................
I'm experimenting with a For Loop, and I don't know how to "tell it when to stop at the end of the column", because the columns have an empty row and then more data.. then an empty row and more data etc So the end of the column would be where there are two empty rows.
Code:
Sub eighteenrowsdown()
'
' eighteenrowsdown Macro
'
'
Dim rng As Range
Set rng = Sheets("Sheet3").Range("I3", "AE3")
Dim i As Integer
[Code]...
I know the code is bad but as long as I can get it to stop at the end of the column I'll be happy
i have the following code, what it does is, it locate those empty cells in column M and insert the formula "=TODAY()". What i need the code to do is only insert to the empty cells in column M if there is a value(as long as is not empty) in the reference cell of column E.
VB:
VB:
Private Sub CommandButton3_Click()
Dim wks As Worksheet
Dim rng As Range
[Code].....
i need to find the first blank cell in a range of a row and return the cell value to the 1st cell of the row, or even return the column header if possible, without the use of VBA due to high security settings at my workplace!
How is it possible to have a talbe of data, months as headers, 4 rows of data for each month, but the next time I run code that imports from another Excel Report to paste the data into the next empty cells? ....
View 9 Replies View RelatedSuppose you are in a worksheet in A1. How can i place my cursor on the first not empty cell?
View 9 Replies View Relateddelete rows with the word apple in cells, in row A:
How can I make this work until last empty cell? The other issue is that I am using this to delete rows also:
Range("A1").Select
This deletes the entire row when its corresponding cell A is empty. I currently make excel put xxx in cell A2500 before running the loop. I would put do until ActiveCell = Null, but that wont work because as you can see some cells in row are empty.
I have the following code that works beautifully, unless the selection area has only one row of data.
lastrow = Range("A11").End(xlDown).Row
Range("A11:A" & lastrow).Select
Due to other data (that needs to not be selected) near the bottom of the page, I cannot do xlUp. So, what's a fix when I run into only one row needing to be sleected?
I want to search in a column for cells with numbers, and one by one get the row number. i want to do this only for the cells with values, excluding the blank ones.
View 8 Replies View Related1. copy data to 'check' sheet from web
2. new data to be appended to the existing data ( not to overwrite on the existing one.
3. sorted within selection
4. down to 1st blank cell below pasted data
my code is not working not well
Sub Srt()
If Len(Range("a1")) > 0 Then
Range("a1").End(xlDown).Offset(1, 0).PasteSpecial
Else
Range("a1").PasteSpecial
End If
ActiveSheet.Paste
Selection.Sort Key1:=ActiveCell, Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortTextAsNumbers
Selection.End(xlDown)).Offset(1, 0).Select
End Sub
problems are
1. it works only in 'A' column. We need it to be flexible to 'A', 'F', or 'K' column depending on where the cursor is
I have 2 worksheets, one called "Consolidated" and one called "Converted".
I have a spreadsheet where I press the update button and a macro runs that searches for the word "Converted" in column E on the Consolidated spreadsheet (the original). When it finds it, the entire row will be cut and pasted onto the "Converted" worksheet.
I have managed to do this with my current code. However when you press the update button again, all the newly pasted rows on the Converted worksheet are deleted. (I would like when i press the update button it to NOT affect the Converted worksheet, just add any new data found on the Consolidated sheet to the Converted sheet.) I assume this is because my current code her below is NOT telling the spreadsheet to paste to the NEXT AVAILABLE EMPTY ROW. Current code:
[Code].....
So the problem is this line:
[Code] .....
I have attempted to replace this line with:
[Code] .....
But there is something wrong as the code keeps breaking on that line!
The first one works fine but the "Description" and "Customer" paste over the top of each other and dont find the empty cell. im sure im missing something!
This submits the following details into the "Stored" table. It also finds an empty cell.
I want to copy a value in "A1" and i would like to paste it in Column "J" but the problem is that there are some values in column 'J' so i want a code that finds the first empty cell in column "J" and paste in there the value from "A1"
View 8 Replies View RelatedI do construction work, and to save on record-keeping, I'm trying to autopopulate a "summary" excel table by only filling out my "accounting" table. I made a sample table, and I'm having a hard time linking it.
For instance, I fill in rows 2 through 9 of the accounting table. Then on the next tab, The concrete section automatically grabbed rows 2 and 8. What I can't figure out, is how to get the summary table to autopopulate without leaving blank rows for rows 3 through 7.
I have this code to look into the "find" match in Column A, and then search to the right for the next columns empty cell and update data. but it seem like the code can only manage to offset 1 and update data to Col B, instead of find the next empty cell to update data.
Code:
Dim vFind1 As String, vFind2 As String, rFound As RangeDim bFound As Boolean
vFind1 = Me.CBSupplier.Value
vFind2 = Me.CBProducts1.Value
Set rFound = Sheets("Main").Range("A:A").Find(Me.CBSupplier.Value, LookIn:=xlValues)
[Code]...
I'm looking for a macro that will search through E2:IV2 and take me to the first empty cell in that row.
I've tried a couple of things but none of them seem to do anything.
I have a spreadsheet that is pulled automatically from an access database.
The information that is pulled is invoices that have been paid for each of the temps working for our company.
Each month I have to give a figure per cost code on how much they are accruing so that they can see how much is still outstanding.
Right so what I am trying to do is have a macro take the temps charge rate then * 40 hours and place the amount into the empty cell.
As you will see in the attachement some of the cells are coloured. The purpose of the colouring is show that a invoice has been processed and paid for that week so no value is needed in that cell.
Then total all the cells at the end.
