I want to copy a value in "A1" and i would like to paste it in Column "J" but the problem is that there are some values in column 'J' so i want a code that finds the first empty cell in column "J" and paste in there the value from "A1"
View 8 Replies
I am using MS Excel 2000. Sheet1 is my working sheet. Cell A17 displays the current date (dd/mm/yyyy). Cells B17:K17 display my summary figures for that day. What I would like is a macro button that would look at the date in Cell A17, and if it is the first of the month …. eg 01/03/2005 it should insert a new sheet into the workbook and put the name Mar05in this case or what ever month it is on the tab. It then copies Cell A17:K17 and pastes the data in to the corresponding monthly sheet starting in A3 to K3. Because my working sheet (Sheet1) is updated with different data daily the new summary data (always in A17:K17) needs to be copied and pasted under the previous days entry in the corresponding monthly sheet. For the month of March I should end up with 31 entries giving me a summary for that month.
View 7 Replies View RelatedI need to find the first non-empty cell in a range and paste a constant value into the preceding cells.
aa bb
aa bb
aa bb
aa bb cc
aa bb cc
aa bb xx
aa bb xx
aa bb xx
aa bb cc
aa bb cc
i need a method to find the end value in a row (right side) and select the empty cell to its right to paste data in.
problem is the row where this data is may change so using
limit = (row, col).end(XlRight).Col
I want to insert some data in a number of cells (e.g. A1, B4, C4 and H8) on a worksheet ('Sheet 1').
I then want to press a button and have some code that:
Looks at column B on 'Sheet 2'
Finds the next empty row Copies and pastes the information from Sheet 1 into specific cells in that empty row.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
The following code is intended to copy and paste the value from cell I2 to the first unused cell in column K. There is is header in cell K1. It works fine if there is a value in K2 or K3, etc., however, if K2 is blank (all cells beyond K1 are blank) I get an error 400 when I run the sub.
View 14 Replies View RelatedI'm have never learnt VB before and would like to try to write one to perform the following: If the next cell isempty, go to the last cell, copy it and paste into the empty cell; Else if the cell is not empty, go to next line and repeat the procedures until reach row =10000
.(BEFORE)
Row 1:Product A
Row 2:
Row 3:
Row 4:
Row 5:Product B
Row 7:
Row 8:
Row 9:......
I need the code to paste my selection in worksheet SORT, into the first available cell in column A. Intention is not to overwrite existing values in column A.
'
Sheets("tis").Select
Range("AC2").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Sheets("SORT").Select
'I need the code to paste my selection in the first available empty cell in column A, so I don't overwrite any existing values in column A
End Sub
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View RelatedI want to create a macro to paste some data into the next empty cell. Below is sort of what I need but this show it going to a particular cell, I need it to got to next open cell in the range from say BY3. So next macro run it would copy and paste the data from T3:T9 (always this range) to BZ3 then CA3, CB3 and so on.
[[Sub CopyData()]
'
' CopyData Macro
' Copy The Data To Build Graph
'
[Code]....
I have 2 worksheets, one called "Consolidated" and one called "Converted".
I would like to have a spreadsheet where I press the update button and a macro runs that searches for the word "Converted" in column E on the Consolidated spreadsheet (the original). When it finds it, I would like the entire row to be cut and pasted onto the "Converted" worksheet.
I have managed to do this with my current code:
[Code] .....
However when this macro runs, the row left behind on the original sheet is a blank row and I don't want this. I would like it to be continuous spreadsheet, not dotted with random blank rows!
I would like a macro that will select the 65536th row to be used to paste format from rows 2 to the last empty cell in column a.
View 5 Replies View RelatedI need my macro to copy and paste from one worksheet to another, which is fine. However I need the copied value to be pasted into the last empty cell in a specific column. It is currently pasting each copied value into the last empty cell in column 'A' regardless of which column I specify it to copy to in my code.
View 5 Replies View RelatedI want a macro which will copy all the data from sheet 1 in columns A:C ignoring any blanks
then paste it into the first free cell in column B of sheet 2
I have this macro and at the present time, can only compare two worksheets. One of my worksheets contains column headers with data, the other worksheet just contains column headers. The macro will match the data against the column header and paste below. I'm doing it this way because I have several tables I export from a MySQL database, but some of them have more fields than others so I was trying to get all of the data to line up in under the correct column header from each table. I need editing the macro to allow for
1) More than one worksheet to be analyzed at a time
2) If the first request is not possible, I would like for the macro to paste results at the next empty cell. As of now, it will only copy one at a time (which requires me to house the data in another worksheet everytime I run the macro).
Below is the code:
Dim ws1 As Worksheet, ws2 As Worksheet
Dim HeaderCells As Range, Hdr As Range, hdrFIND As Range
Application.ScreenUpdating = False 'speed things up
Set ws1 = ThisWorkbook.Worksheets("HEADERS") 'Define name of worksheets
Set ws2 = ThisWorkbook.Worksheets("B")
[Code] .......
I am trying to write a macro to do the following: Loop through a range of cells on a worksheet Sheet1 M17:M46 and if there is text in the cell then Copy all the data to the left Of Coumun M in the same row and paste the values to the next open row of a range A17:L46 on another worksheet (sheet2.) Basically the text in column M is an idicator to add the data to an order sheet. If there is no text don't add the data , look in the next row etc.
I'm not sure if this is the way to go
Sub CopyRows()
Worksheets("sheet1").Select
FinalRow = Range("M65536").End(xlUp).Row
' Find the last row of data
' Loop through each row
For x = 2 To FinalRow
' Decide if to copy based on column M
ThisValue = Range("M" & x).Value
' could be any value
If ThisValue = "yes" Then
Worksheets("sheet2").Range("A" & x & ":L" & x).Copy
Worksheets("sheet1").Select
NextRow = Range("A65536").End(xlUp).Row + 1
Range("A" & NextRow).Select
ActiveSheet.PasteSpecial = xlValues
Worksheets("sheet1").Select
End If
Next x
End Sub
I am trying to do is create an invoice log of payments received. For each payment there is a cell value of how many products the customer has which is updated on each payment entry. What I want to do is have a macro that runs when all other data is entered to update this value.
So I have a main customer sheet where it holds the product amount in the same workbook, let's call this cell $A$1 holding a value of 47. I go to enter a payment record on the invoice sheet, once this is complete the macro will run and look to $A$1 on the first sheet and update $B1 on my invoice sheet. On the next entry it will update $B2, then $B3 and so on.
i need to have 6 or so cells copied and pasted into another sheet. (when a button is pressed) However before the data is pasted it checks if there is anything in the cell(s) that are being pasted into, if there is something then move down a line and paste. Here is the code i have already:
Sub Order2Invoice()
Sheets("OrderDatabase").Select
Range("B65536").End(xlUp).Offset(1, 0).Select
With ActiveCell
.Value = Orderform!G5.Value
.Offset(0, 1) = Orderform!E10.Value
.Offset(0, 2) = Orderform!E11.Value
.Offset(0, 3) = Orderform!E12.Value
.Offset(0, 4) = Orderform!E13.Value
.Offset(0, 5) = Orderform!E15.Value
.Offset(0, 8) = Orderform!E15.Value
End With
Sheets("Invoice").Select
End Sub
i need to find the first blank cell in a range of a row and return the cell value to the 1st cell of the row, or even return the column header if possible, without the use of VBA due to high security settings at my workplace!
How is it possible to have a talbe of data, months as headers, 4 rows of data for each month, but the next time I run code that imports from another Excel Report to paste the data into the next empty cells? ....
View 9 Replies View RelatedSuppose you are in a worksheet in A1. How can i place my cursor on the first not empty cell?
View 9 Replies View Relateddelete rows with the word apple in cells, in row A:
How can I make this work until last empty cell? The other issue is that I am using this to delete rows also:
Range("A1").Select
This deletes the entire row when its corresponding cell A is empty. I currently make excel put xxx in cell A2500 before running the loop. I would put do until ActiveCell = Null, but that wont work because as you can see some cells in row are empty.
I have the following code that works beautifully, unless the selection area has only one row of data.
lastrow = Range("A11").End(xlDown).Row
Range("A11:A" & lastrow).Select
Due to other data (that needs to not be selected) near the bottom of the page, I cannot do xlUp. So, what's a fix when I run into only one row needing to be sleected?
I want to search in a column for cells with numbers, and one by one get the row number. i want to do this only for the cells with values, excluding the blank ones.
View 8 Replies View Related1. copy data to 'check' sheet from web
2. new data to be appended to the existing data ( not to overwrite on the existing one.
3. sorted within selection
4. down to 1st blank cell below pasted data
my code is not working not well
Sub Srt()
If Len(Range("a1")) > 0 Then
Range("a1").End(xlDown).Offset(1, 0).PasteSpecial
Else
Range("a1").PasteSpecial
End If
ActiveSheet.Paste
Selection.Sort Key1:=ActiveCell, Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortTextAsNumbers
Selection.End(xlDown)).Offset(1, 0).Select
End Sub
problems are
1. it works only in 'A' column. We need it to be flexible to 'A', 'F', or 'K' column depending on where the cursor is
The first one works fine but the "Description" and "Customer" paste over the top of each other and dont find the empty cell. im sure im missing something!
This submits the following details into the "Stored" table. It also finds an empty cell.
I do construction work, and to save on record-keeping, I'm trying to autopopulate a "summary" excel table by only filling out my "accounting" table. I made a sample table, and I'm having a hard time linking it.
For instance, I fill in rows 2 through 9 of the accounting table. Then on the next tab, The concrete section automatically grabbed rows 2 and 8. What I can't figure out, is how to get the summary table to autopopulate without leaving blank rows for rows 3 through 7.
I have this code to look into the "find" match in Column A, and then search to the right for the next columns empty cell and update data. but it seem like the code can only manage to offset 1 and update data to Col B, instead of find the next empty cell to update data.
Code:
Dim vFind1 As String, vFind2 As String, rFound As RangeDim bFound As Boolean
vFind1 = Me.CBSupplier.Value
vFind2 = Me.CBProducts1.Value
Set rFound = Sheets("Main").Range("A:A").Find(Me.CBSupplier.Value, LookIn:=xlValues)
[Code]...
I'm looking for a macro that will search through E2:IV2 and take me to the first empty cell in that row.
I've tried a couple of things but none of them seem to do anything.
