I have a spreadsheet that is pulled automatically from an access database.
The information that is pulled is invoices that have been paid for each of the temps working for our company.
Each month I have to give a figure per cost code on how much they are accruing so that they can see how much is still outstanding.
Right so what I am trying to do is have a macro take the temps charge rate then * 40 hours and place the amount into the empty cell.
As you will see in the attachement some of the cells are coloured. The purpose of the colouring is show that a invoice has been processed and paid for that week so no value is needed in that cell.
i have the following code, what it does is, it locate those empty cells in column M and insert the formula "=TODAY()". What i need the code to do is only insert to the empty cells in column M if there is a value(as long as is not empty) in the reference cell of column E.
VB: VB: Private Sub CommandButton3_Click() Dim wks As Worksheet Dim rng As Range
i need to find the first blank cell in a range of a row and return the cell value to the 1st cell of the row, or even return the column header if possible, without the use of VBA due to high security settings at my workplace!
How is it possible to have a talbe of data, months as headers, 4 rows of data for each month, but the next time I run code that imports from another Excel Report to paste the data into the next empty cells? ....
delete rows with the word apple in cells, in row A:
How can I make this work until last empty cell? The other issue is that I am using this to delete rows also:
Range("A1").Select
This deletes the entire row when its corresponding cell A is empty. I currently make excel put xxx in cell A2500 before running the loop. I would put do until ActiveCell = Null, but that wont work because as you can see some cells in row are empty.
Due to other data (that needs to not be selected) near the bottom of the page, I cannot do xlUp. So, what's a fix when I run into only one row needing to be sleected?
I want to search in a column for cells with numbers, and one by one get the row number. i want to do this only for the cells with values, excluding the blank ones.
1. copy data to 'check' sheet from web 2. new data to be appended to the existing data ( not to overwrite on the existing one. 3. sorted within selection 4. down to 1st blank cell below pasted data
my code is not working not well
Sub Srt() If Len(Range("a1")) > 0 Then Range("a1").End(xlDown).Offset(1, 0).PasteSpecial Else Range("a1").PasteSpecial End If ActiveSheet.Paste Selection.Sort Key1:=ActiveCell, Order1:=xlAscending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _ DataOption1:=xlSortTextAsNumbers Selection.End(xlDown)).Offset(1, 0).Select End Sub
problems are 1. it works only in 'A' column. We need it to be flexible to 'A', 'F', or 'K' column depending on where the cursor is
The first one works fine but the "Description" and "Customer" paste over the top of each other and dont find the empty cell. im sure im missing something!
This submits the following details into the "Stored" table. It also finds an empty cell.
I want to copy a value in "A1" and i would like to paste it in Column "J" but the problem is that there are some values in column 'J' so i want a code that finds the first empty cell in column "J" and paste in there the value from "A1"
I do construction work, and to save on record-keeping, I'm trying to autopopulate a "summary" excel table by only filling out my "accounting" table. I made a sample table, and I'm having a hard time linking it.
For instance, I fill in rows 2 through 9 of the accounting table. Then on the next tab, The concrete section automatically grabbed rows 2 and 8. What I can't figure out, is how to get the summary table to autopopulate without leaving blank rows for rows 3 through 7.
I have this code to look into the "find" match in Column A, and then search to the right for the next columns empty cell and update data. but it seem like the code can only manage to offset 1 and update data to Col B, instead of find the next empty cell to update data.
Code:
Dim vFind1 As String, vFind2 As String, rFound As RangeDim bFound As Boolean vFind1 = Me.CBSupplier.Value vFind2 = Me.CBProducts1.Value Set rFound = Sheets("Main").Range("A:A").Find(Me.CBSupplier.Value, LookIn:=xlValues)
I am running this macro or some variation of it, depending on the column I need the time entered into:
Sub MacroD() Dim LR As Long LR = Range("D" & Rows.Count).End(xlUp).Row ActiveSheet.Unprotect Range("D18:D" & LR).Value = Now ActiveCell.Offset(1, 0).Select UserForm1.ListBox1.Text = "Time" UserForm1.ListBox1.SetFocus ' UserForm1.Show End Sub
When I need to run the same macro again (say I've run Macro D once, and now I need to run it again to get the next time), the forumla overrides the previous timestamp. I need the macro to find the next empty cell in column D and enter the timestamp there.
I want to use the Find method to find an empty cell in the first column. But at the top of the data taqble, there are some empty cells, so I don't get the one I want. So I thought about searching in the column 1 excluding the first cells. Here is my
Dim rFoundCell As Range Dim rFilledCol1 As Range
'I define the column excluding the cells that contain empty cells rFilledCol1 = Columns(1) - Range("A1:A10") Set rFoundCell = rFilledCol1.Find(What:="", After:=Range("A11"), LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _ SearchDirection:=xlNext, MatchCase:=False)
I am trying to find code that will find the first empty cell in a row and add data in cell left to right. This code is filling all data in the last cell of the row and I am hoping to have it loop through data and fill the first empy cell (M1) and next data placed (m2) and so on
Sub Reportdates() Dim Grid As Range, Gridcell Dim Crit1 As Range Dim Crit2 As Range Set Grid = ThisWorkbook.Worksheets("sheet3").Range(" dates") Set Crit1 = ThisWorkbook.Worksheets("Stageing").Range("J1") Set Crit2 = ThisWorkbook.Worksheets("Stageing").Range("K1") For Each Gridcell In Grid If Gridcell.Value >= Crit1 And Gridcell.Value <= Crit2 Then ThisWorkbook.Worksheets("Stageing").Range("M1").End(xlToRight).Offset(0, 0) = Gridcell.Value End If 'Exit For Next Gridcell End Sub
I am need of some code that I can assign to a button that will take a user to the first empty row of another worksheet in order to do some data entry. I only need to look in column A, which is titled "Tag Number."
I'm trying to use the find() function (or another if it exists) to find a previous non-empty cell.
Basically, the active cell will be ain a column with mostly empty cells, and I need it to move up the column looking for the previous cell that is not blank. I could do it with a loop, but I'd rather not if possible.
I am trying to write a macro which searches for a certain value (*?CNMT_LBID) in my worksheet, then copies it, plus the two cells to the right of it, to the first empty cell in the row above.
I have got so far, but am now stuck! I am not sure how to specify the row above my current cell, and then find the next blank cell to paste into.
Also, I'm not sure if my code is correct, any corrections are welcome!
Sub Move_Data() ' Dim i As Integer 'for loop below Dim rng As Range 'Cell to start 'cut' from
'rng = cell containing "*?CNMT_LBID" Set rng = .Find(What:="*?CNMT_LBID", After:=ActiveCell, LookIn:=xlFormulas, _ LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _ MatchCase:=False, SearchFormat:=False) 'Loop to cut cells "*?CNMT_LBID" plus next two columns to the right, and place in empty cell in row above For i = 0 To 2 rng.Offset(0,i).Cut( ) Next
I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
I'm trying to find the first empty cell in a column on one sheet, then insert the value in the adjacent cell to the left into a cell on a different sheet,
I am using MS Excel 2000. Sheet1 is my working sheet. Cell A17 displays the current date (dd/mm/yyyy). Cells B17:K17 display my summary figures for that day. What I would like is a macro button that would look at the date in Cell A17, and if it is the first of the month …. eg 01/03/2005 it should insert a new sheet into the workbook and put the name Mar05in this case or what ever month it is on the tab. It then copies Cell A17:K17 and pastes the data in to the corresponding monthly sheet starting in A3 to K3. Because my working sheet (Sheet1) is updated with different data daily the new summary data (always in A17:K17) needs to be copied and pasted under the previous days entry in the corresponding monthly sheet. For the month of March I should end up with 31 entries giving me a summary for that month.
how i can go about finding the next empty row (and select the first cell of that row (column A))? edit: It probably should be noted that there are cells in Columns A through P. There are rows where all and/or just one cell contains data per row. So i cannot use a " lookup" based on a single column.
I am looking for a formula function or a vba code where:
- In workbook1 find the first cell that is empty between range A7 - A10, - In workbook2, in Range G10- G13: find the word "Day1". - If the word "Day1" exists in cells G10 or G11 or G12 or G13, copy the particular cell or cells where "Day1" exists to the first found empty cell or cells in range A7-A10 in workbook1.
Lets suppose cells A8, A9, A10(workbook1) are empty cells, that means A8 is the first empty cell. And G10,G11,G12, G13 (workbook2) have the word "Day1" Then, Copy cell G10 into cell A8 Copy cell G11 into cell A9 Copy cell G12 into cell A10
