Search For Criteria In A Column - Cut And Paste Row To Next Empty Row In New Sheet?
Jul 25, 2014
I have 2 worksheets, one called "Consolidated" and one called "Converted".
I have a spreadsheet where I press the update button and a macro runs that searches for the word "Converted" in column E on the Consolidated spreadsheet (the original). When it finds it, the entire row will be cut and pasted onto the "Converted" worksheet.
I have managed to do this with my current code. However when you press the update button again, all the newly pasted rows on the Converted worksheet are deleted. (I would like when i press the update button it to NOT affect the Converted worksheet, just add any new data found on the Consolidated sheet to the Converted sheet.) I assume this is because my current code her below is NOT telling the spreadsheet to paste to the NEXT AVAILABLE EMPTY ROW. Current code:
So the problem is this line:
I have attempted to replace this line with:
But there is something wrong as the code keeps breaking on that line!
I have a file that has two sheets, I have some formulas in the first sheet named "Data",What i would like to have is, If column G in the sheet Data is "Closed", then i want that particular row to be cut from the sheet " Data" and pated in to the Sheet "Done".
Basically a VBA code for a Command Button which when being pushed looks for the last cell being used in column A and copy/pastes rows 1 to 19 right in the next cell where this X (just an example..X could be anything basically) would be found. My columns go up to BU.
What I have is a workbook where I have to filter on a column called "Code" in a worksheet called "Current" and search for varies criteria and then copy these filerted rows and paste into a worksheet called "Past" and then delete the orginal rows form the "Current" tab.
e.g. filter on a column called "Code" and filter on the criteria that match "Monday", "123" and "Customer Accepted" and paste at the bottom of the "Past" tab and then delete from the "Current" tab. A message should then be displayed saying "Data Transferred OK" with the curser then highlighting "A1" on the "Current" tab.
The only cavat is that the code may find none, some or all of the required criteria, however, in the event of finding no matching data then a message should then be displayed saying "No Data Found" with the cursor then highlighting "A1" on the "Current" tab
As I have to repeat this to filter on various columns for various criteria I intend to modify the code accordingly, however, in once instance I will have to filter on a column called "Code" and filter on the criteria 1,2 and 3 etc but then I have to do second filter on column called "Code Extra" and then do a filter on the criteria 4, 5 and 6 so the additional code would also be good.
Have a small VBA code that simply copy a row and then paste it on first empty row in another sheet. Its working if i use a regular macro, but i have some problems to get it to work with some code. I want it as VBA since the copying is alot smoother. The problem i have in the code is the PasteSpecial.value, Since i dont want the formula to get pasted. Attachiing the worksheet. Its the macro PasteSpecial that i need alittle guiding on if possible.
Right now I use Range() to define where I want something pasted. How do I use get away from that to just use the next empty row, so I don't have to keep changing the code everytime the data sheet expands?
Here is an example of what I'm using: Sheets("Sheet1").Select Range(Range("F4"), Range("F4").End(xlDown)).Select Selection.Copy Range("BX4").Select ActiveSheet.Paste Range("BX3").Select ActiveCell.FormulaR1C1 = "Header"
Need code to copy a column from a worksheet, and paste it in the first empty column in a second worksheet? I can do this easily when I want to copy/paste to the first empty row using the
Sheet3.Select Range("A1:A10").Select Application.CutCopyMode = False Selection.Copy Sheet2.Select Dim LastCell As Range With ActiveSheet Set LastCell = .Cells(.Rows.Count, "A").End(xlUp) If IsEmpty(LastCell) Then 'do nothing Else Set LastCell = LastCell.Offset(1, 0) LastCell.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False End If End With
but I cannot find a way to change this to columns!
I am very new to macros and I do not know what I am doing. I am trying to create a macro that will search column O for any entrys, if it finds an entry, then it will select the row with that entry, cut it, and then paste into the sheet named complete on the next available row.
I'm never done a macro before and of course I'm very new to excel. I have a worksheet for lessons learned that have multiple sheets for each state. I want to create a macro that every time I enter a new data into a row and hit "Add to summary sheet" and it copy and paste the the next available row in summary sheet.
See the attached file for my workbook : Book1.xlsxâ€Ž
I need my macro to copy and paste from one worksheet to another, which is fine. However I need the copied value to be pasted into the last empty cell in a specific column. It is currently pasting each copied value into the last empty cell in column 'A' regardless of which column I specify it to copy to in my code.
I have a workbook that is an export from an inventory database. Basically I need to search Sheet1 column B for any item with "DDC" in its value, select the entire row, copy/cut it, and paste it into Sheet3. It would be nice to have it delete the row from Sheet1 after successful paste. I want to stress the fact that I'm a no0b with excel macros and have a very small understanding of programming in general. I've tried taking a few different macros with similar goals and slapping them together, this is what I've come up with so far with still zero luck.
At the moment the error is "Application-defined or object-defined error" with "With Worksheets(1). Range("B")
Sub DDC() With Worksheets(1).Range("B") Set c = .Find("*DDC*", LookIn:=xlValues) If Not c Is Nothing Then firstAddress = c.Address Do c.EntireRow.Copy Destination:=Worksheets("Sheet2").Range("A" & Worksheets("Sheet2").Range("A65536").End(xlUp).Row + 1) Set c = .FindNext(c) Loop While Not c Is Nothing And c.Address <> firstAddress End If End With End Sub
I am pulling from odbc into an excel sheet Thier is one column with our Sales Order Numbers.
I would like to have a search box or box pop up asking a user to enter the Sales order number they need. Once they do that it will search thru the list and copy the rows with that Sales Order Number, then paste them to another sheet.
I need help on setting the searching part up and selecting the range to copy....I think I can take it from thier after that.
I have a macro that automatically takes data from one sheet, copies it and pastes it on another sheet, but I want it to select the empty column that is to the right of the last column to contain data (so basically the next empty column). What code would I enter into editting my macro to be able to do this please?
Also, one thing I've tried to do with my macro is that when I select the data, it's suppose to select from the first name to the last. When doing the actions for the macro, I use "Ctrl + Shift + Down Arrow Key" to make the selection select the bottom of the list. However, when running the macro, if the list is longer (or shorter), the macro selects that number of cells instead of the action of just going to the bottom of the list. For example, if during the actions of the macro, I recorded using the Ctrl + Shift + Down Arrow Key that 50 cells were selected...next time if I have 60 cells, only 50 are selected, even though I used an action command which should select all the cells in that group (in this case being 60). Is there some code I can add to that so this would work correctly?
In case its required, here is the code from the macro:
I am trying to create a macro so that when i save an entry the form sheet looks in the tavela master sheet to see if there is a match on the record number (in the A column) and saves there as an update if it matches and then if there is no match, saves it in the last empty row. this is a column to row copy so it has to be paste special to transpose. also i have a password on the sheet which i use to unprotect then reprotect. i have successfully done these two things separately but cannot combine them! i know not very much about visual basic code just what i have read here and so i am trying to make this code work.
I am trying to use a code to run a loop and search in column B for a certain name and if it finds it I want it to then look at column P and if it finds that the result in column B is less than $1000 then I want it to cut the entire row and paste the row in another sheet. Here is the code.
I'm trying to write a program for work. One sheet (whereiseverything.xls) will have a list of parts column E and where it is in the process column (k). Column E of this sheet will have multiple part numbers. (Sometimes duplicated.) I would like to figure out how to write a code to Auto filter (whereiseverything.xls) sheet and copy only one P/N from (whereiseverything.xls) column E onto another Workbook Worksheet (Commit status.xls) column. After that the sheet must copy all of the locations of that P/N from whereiseverything.xls column K into and under the P/N of the Commitstatus.xls.
It will continue to autofilter and copy from where is everything, the "one" p/n and all of its locations into another empty column of Commitstatus.xls until it no longer has part numbers to autofilter on whereiseverything. I am extremely green on VBA programming but here is my first attempt.
Windows("Where is everything commits .xls").Activate Windows("whereiseverything.xxx").Activate Columns("D:D").Select Selection.AutoFilter Windows("Where is everything commits .xls").Activate
Windows("whereiseverything.xxx").Activate Selection.AutoFilter Field:=1, Criteria1:="7516113-905" \<--this Is one p/n Columns("J:J").Select Selection.Copy....................................
i have the following code, what it does is, it locate those empty cells in column M and insert the formula "=TODAY()". What i need the code to do is only insert to the empty cells in column M if there is a value(as long as is not empty) in the reference cell of column E.
VB: VB: Private Sub CommandButton3_Click() Dim wks As Worksheet Dim rng As Range
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Sub transposedata() Sheets("ConsolidatedYTDReport").Select Range("E2:H4202").Select Selection.Copy XXXXXXXXXXXX ActiveSheet.Paste End Sub
I would Need a macro which would Search a Keyword in the excel sheet and copies and pates the data in Cell "A2". for Example "Market" and then after the search it copies 12 rows upwards and 10 columns from the Cell that the word "Market" is placed. And then it copies 12 rows downwards and 10 columns from the Cell that the word "Market" is placed.
I have tried recording the same but it does not work if the Word "Market" is placed in different cell value.
What I have is a sheet that is copied periodically from some source sheet, and on this sheet is a table. This sheet is called "Onsite Checklist Template" and it's table is titled "Checklist". I also have another sheet called "Loggers and Initial Notes" which has a tabled titled "Record", and then finally a title sheet call "Proj Details".
To clear this intro up - The sheets, in their order, is: "Proj Details", "Loggers and Initial Notes", "Onsite Checklist Template". The tables: "Record" on "Loggers..." and "Checklist" on "Onsite..."
When the user wants to make a new site visit, he/she fills in the requested date and then selects a button on "Proj...". When this button is selected, it copies the table data on "Record" and puts it on "Checklist", then inserts a new worksheet tab, always in the 3rd position (the title is based on the site visit date in which the user entered), which is a copy of "Onsite...". Now we have another sheet with a table called "Checklist1", and upon another new site visit, there will be another worksheet with "Checklist2", and so on.
On the "Onsite..." worksheet, there is a button on it which also gets copied with the worksheet so that every new worksheet has this copied "Checklist ???" and this button. I'm looking for a macro that, when the button is selected, will bounce the active sheet's table "Checklist ???" off of "Record" and make changes as needed.
"Checklist ???" data range is B11:M20 (the header is on row 10); "Record" data range is B29:Q78 (the header is on row 28); Column headers are titled the same, just that "Record" has 4 extra columns, 3 in the middle and 1 on the end. "Checklist ???" columns 1-12 to "Record" columns 1-7, 10-12, 14-15. The search criteria is the 4th column in both tables ("Trk #").
I need the macro to do the following:If it finds a match, then update "Record" as needed with data from "Checklist ???", changing whatever cell is different in the row that contains the matching "Trk #", so long as the cell on "Checklist ???" is populated (i.e, if a cell on the target row of "Record" has a value, but it's blank on "Checklist ???", then "Record" wins; if it's blank on "Record", but populated on "Checklist ???", the Checklist wins. If both populated but different, then Checklist wins.If a "Trk #" exists on "Checklist ???" but is not on "Record" then add the line to "Record" (the 1st empty row, table size remains)I see no need for any "delete" at this time.
My concerns: The last column on record (column #16) is the filtering column for the worksheet copy event and needs to be left alone (it's formulated to produce a "Yes" or "No")I would like the ability to adjust table sizes if needed without modifying the macroThe table rows on "Checklist ???" will not be changed, deleted, or altered in any way by the macro.
I have a dictionary for which’s words I want to find poem verse pairs as references. I want to add 3 different verse pairs of poems as reference to each word from my wordlist. There are two worksheets: .......