Find Empty Cell In Row After Certain Point Then Insert Values From Another Sheet
Jun 4, 2014
I'm trying to create a macro that when run, scans Row 12 (only after column E), Finds the first empty cell, then inserts the cell value from Sheet4 CellE8. Then the hard bit begins. I need it to insert cell info in all the cells below it, from different locations...
For example
A
B
C
D
[Code].....
In the above sheet, I need it to go to cell D2 and insert the values from Sheet4 CellE8, Then proceed to D3 and insert data from Sheet3 D4, then to cell D5 and insert data from Sheet1 A7, etc etc
I dont mind doing each cell individually, but they will always be in the same column (and row 2 "Value" will always be the one that determines the next empty column).
I'm trying to find the first empty cell in a column on one sheet, then insert the value in the adjacent cell to the left into a cell on a different sheet,
I want to do is add data into Sheet A each day then press a button which will copy the data in a range and paste it into Sheet B, but I want to create a list of all data so I need it to find the next empty cell and start the paste from there (if that makes sense).
I want it to create a data base on one sheet from a daily import, I have a code to copy one cell to next empty cell but dont know how to duplicate it to a range.
I hope I have given you enough info this is what I have done so far
Public Sub CopyData() Dim ws As Worksheet, bi As Byte, vData(1 To 1) Set ws = Sheets("A") For bi = 1 To 1 vData(bi) = Application.Choose(bi, ws.Range("A1"))
I am looking for a VBA code which will search for a last empty row in given range, and sumup all the values above it in the same cell...this has to be repeated for other columns as well. The column and row numbers may vary depending on another code. In any case the summation has to be in the last empty row...The excel table should look like as below, the last row is summation of all the values above..
A B C D 1 - - - 2 - - - - 3 - - - 4 - - - - 5 - - - 6 - - - - 7 - - - 8 3 7 11 15
I'm looking for a quick and easy way to insert a value in the first empty cell in a multi-column, multi-row range using VBA. I suppose I could loop through the range, but the table could grow to immense proportions and I don't want to slow everything down.
For example, the new value should be placed in cell C4. It doesn't matter whether the range is looped through the rows or columns, either will work just fine.
The rows, from row 3 down in column A contain part numbers.
The Columns, in row1, from B to (last column with data) contains job numbers.
On another sheet, named: Non_Completed. I have the part numbers in column A (as in the PartNumVsJobNum worksheet). In column E down are Job Numbers (IE: 4PZ). In column G are quantity values.
So for instance if Cell (A3) = 360010 (first part number listed) and Cell (B1) = 4PZ I need a macro the will find the rows with 360010 in Column A on sheets( Non_Completed) and try to find the job number (4PZ) in (columnE) for one of the rows. If the job number is found, then the value in G of the (Non_Completed) sheets should be copied to the corresponding XY cell in the PartNumVsJobNum spreadsheet.
I will need to do this for each job number on PartNumVsJobNum Sheet.
I got the following formula to get data from the "data"-sheet into the "werkblad"-sheet. If the regarding cell on the "data"-sheet is empty the result on the "werkblad"-sheet will be "0"
I have a table refreshed from a MySQL database that I use to create a report. I can use this data quite well using formulas in the cells.But in order for me to add more information to the report I use without making it cluttered I need to add some data as comments.
I have created a loop that picks up some cell values that I want to use as criteria but I cant work out how to use these variables to search through the table and get the info I require to put in the comment. In a cell I would use offset/match or index/match to get the required cell value but how do I do this in VBA?
I'd like to send data from an excel sheet to an XML file that already exists. Is there a simple way to use XPath to point to a tag (in which I would want to insert text) using VBA?
I have the following code to transfer data to another sheet, but there are 2 issues with it:
1. I want to just paste the values, but every code I have tried has had object or syntax errors that can't seem to be fixed
2. If I run the macro a second time, it overwrites what was pasted the last time the macro ran. My code looks like it should look for the next empty row in the range, but it doesn't seem to do that.
What is the correct syntax to do the above. Here is the code:
Sub Update()
Dim c As Object Dim rngA As Range Dim cc As Object Dim rngAA As Object
'Check every cell in the range for matching criteria. For Each c In Sheets("OpenGen").Range("F9:F208")
I need to insert values from a column in one sheet to another sheet with a Loop mentioned here.
(I have attached a sample workbook for your kind reference.)
IN STATEMENT SHEET, I NEED TO INSERT (IN col F) THE VALUES from Col A of NOS sheet.THE INSERTION SHOULD BE LOOPED AS MENTIONED HERE
i.e. First time, it should be 1 to 10 Second time it should be 2 to 10 and 1 Third time it should be 3 to 10 and 1, 2 Fourth time it should be 4 to 10 and 1,2,3 Fifth time it should be 5 to 10 and 1,2,3,4…. And so on, till the last row with a value in ColA.
THE VALUES IN Col A of NOS Sheet MAY BE CHANGED WHENEVER REQUIRED. There it is 1 to 10, but it may be Alphabets or any other words also. Hence, whatever values in Col A of NOS sheet should be taken for looping.
i need to find the first blank cell in a range of a row and return the cell value to the 1st cell of the row, or even return the column header if possible, without the use of VBA due to high security settings at my workplace!
How is it possible to have a talbe of data, months as headers, 4 rows of data for each month, but the next time I run code that imports from another Excel Report to paste the data into the next empty cells? ....
delete rows with the word apple in cells, in row A:
How can I make this work until last empty cell? The other issue is that I am using this to delete rows also:
Range("A1").Select
This deletes the entire row when its corresponding cell A is empty. I currently make excel put xxx in cell A2500 before running the loop. I would put do until ActiveCell = Null, but that wont work because as you can see some cells in row are empty.
Due to other data (that needs to not be selected) near the bottom of the page, I cannot do xlUp. So, what's a fix when I run into only one row needing to be sleected?
I want to search in a column for cells with numbers, and one by one get the row number. i want to do this only for the cells with values, excluding the blank ones.
1. copy data to 'check' sheet from web 2. new data to be appended to the existing data ( not to overwrite on the existing one. 3. sorted within selection 4. down to 1st blank cell below pasted data
my code is not working not well
Sub Srt() If Len(Range("a1")) > 0 Then Range("a1").End(xlDown).Offset(1, 0).PasteSpecial Else Range("a1").PasteSpecial End If ActiveSheet.Paste Selection.Sort Key1:=ActiveCell, Order1:=xlAscending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _ DataOption1:=xlSortTextAsNumbers Selection.End(xlDown)).Offset(1, 0).Select End Sub
problems are 1. it works only in 'A' column. We need it to be flexible to 'A', 'F', or 'K' column depending on where the cursor is
The first one works fine but the "Description" and "Customer" paste over the top of each other and dont find the empty cell. im sure im missing something!
This submits the following details into the "Stored" table. It also finds an empty cell.
I want to copy a value in "A1" and i would like to paste it in Column "J" but the problem is that there are some values in column 'J' so i want a code that finds the first empty cell in column "J" and paste in there the value from "A1"
I do construction work, and to save on record-keeping, I'm trying to autopopulate a "summary" excel table by only filling out my "accounting" table. I made a sample table, and I'm having a hard time linking it.
For instance, I fill in rows 2 through 9 of the accounting table. Then on the next tab, The concrete section automatically grabbed rows 2 and 8. What I can't figure out, is how to get the summary table to autopopulate without leaving blank rows for rows 3 through 7.
I have this code to look into the "find" match in Column A, and then search to the right for the next columns empty cell and update data. but it seem like the code can only manage to offset 1 and update data to Col B, instead of find the next empty cell to update data.
Code:
Dim vFind1 As String, vFind2 As String, rFound As RangeDim bFound As Boolean vFind1 = Me.CBSupplier.Value vFind2 = Me.CBProducts1.Value Set rFound = Sheets("Main").Range("A:A").Find(Me.CBSupplier.Value, LookIn:=xlValues)
I am running this macro or some variation of it, depending on the column I need the time entered into:
Sub MacroD() Dim LR As Long LR = Range("D" & Rows.Count).End(xlUp).Row ActiveSheet.Unprotect Range("D18:D" & LR).Value = Now ActiveCell.Offset(1, 0).Select UserForm1.ListBox1.Text = "Time" UserForm1.ListBox1.SetFocus ' UserForm1.Show End Sub
When I need to run the same macro again (say I've run Macro D once, and now I need to run it again to get the next time), the forumla overrides the previous timestamp. I need the macro to find the next empty cell in column D and enter the timestamp there.
I have a spreadsheet that is pulled automatically from an access database. The information that is pulled is invoices that have been paid for each of the temps working for our company. Each month I have to give a figure per cost code on how much they are accruing so that they can see how much is still outstanding.
Right so what I am trying to do is have a macro take the temps charge rate then * 40 hours and place the amount into the empty cell. As you will see in the attachement some of the cells are coloured. The purpose of the colouring is show that a invoice has been processed and paid for that week so no value is needed in that cell.
