Statement To Find Next Non-empty Cell
Mar 10, 2013
I do construction work, and to save on record-keeping, I'm trying to autopopulate a "summary" excel table by only filling out my "accounting" table. I made a sample table, and I'm having a hard time linking it.
For instance, I fill in rows 2 through 9 of the accounting table. Then on the next tab, The concrete section automatically grabbed rows 2 and 8. What I can't figure out, is how to get the summary table to autopopulate without leaving blank rows for rows 3 through 7.
View 6 Replies
ADVERTISEMENT
Jun 19, 2006
I have created a user form with a combo box and three text boxes. The drop down box is populated via the initialization of the form; code is posted below.
the "add item" names are names that are already on the worksheet in column 1. What i have done is used the command button "submit" to populate the information from the textboxes to the worksheet.
what i would ike to do is populate the empty cells below this area with the information that is in all three text boxes and the combo box. for the IF / elseif statments i have used the combo box as the condition. So the quandry is I cant input the information into the empty cells, i have tried a few things, my vba is very basic, as you can tell ihavent even DIM'd anything (i think that is another thread though :D )
here is the initialize code and below is the "submit button" code.
Private Sub UserForm_Initialize()
'sets values for text boxes
cbomaterialdiscription.Value = ""..........
View 9 Replies
View Related
Feb 21, 2014
Find statement returns empty when i search in a range with XLWhole option enabled
Code:
Private Sub worksheet_change(ByVal Tar As Range) On Error Resume Next
If Tar.Column = 1 Then
Set f = Sheets("Sheet2").Range(Cells(1, 1), Cells(5000, 100)).Find(Tar(1, 1), LookAt:=xlWhole)
[Code]..
but when i use Cells instead of Range ,Find command returns perfect result
Code:
Private Sub worksheet_change(ByVal Tar As Range) On Error Resume Next
If Tar.Column = 1 Then
Set f = Sheets("Sheet2").Cells.Find(Tar(1, 1), LookAt:=xlWhole)
If f.Column = 11 Then Sheets("Sheet1").Cells(Tar.Row, Tar.Column + 1).Value _
= Sheets("Sheet2").Cells(f.Row, f.Column + 1).Value
End Sub
View 1 Replies
View Related
May 8, 2014
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
View 5 Replies
View Related
Jul 10, 2014
Trying to look at cell I2 to see if it's blank, has the current expiration date of 9/1/2014, or has an earlier expiration date.
I'm entering in K2 the following: IF(I2="","",IF(I2="9/1/2004","OWES","C")) At this point if the cell is blank it will show blank in K2 but if there is a date it always shows C.
View 3 Replies
View Related
Nov 11, 2008
I have a problem with finding the right function. My goal is to have the following function...
The cell D1 has the following function: [=IF(B1<=C1;"YES";"NO")] But I would like to have the cell D1 to be left blank, if the cell A1 is blank.
View 8 Replies
View Related
Jul 2, 2014
How to leave a cell truly empty if the criteria of my IF statements is untrue. Currently, I'll write something like:
[Code] ....
But for some reason, when I copy and paste the resulting range of values elsewhere (to rid myself of the formula that determined them), the cells that did not return a value (where the statement is FALSE), are not recognized by a "Go To Special > Blanks" request, until I select all of the "empty cells" and clear them manually. Yet when I try to do a search on the same range for an empty space, I get no hits.
View 3 Replies
View Related
Jul 14, 2008
i need to find the first blank cell in a range of a row and return the cell value to the 1st cell of the row, or even return the column header if possible, without the use of VBA due to high security settings at my workplace!
View 11 Replies
View Related
Oct 13, 2008
How is it possible to have a talbe of data, months as headers, 4 rows of data for each month, but the next time I run code that imports from another Excel Report to paste the data into the next empty cells? ....
View 9 Replies
View Related
Oct 14, 2008
Suppose you are in a worksheet in A1. How can i place my cursor on the first not empty cell?
View 9 Replies
View Related
May 24, 2006
delete rows with the word apple in cells, in row A:
How can I make this work until last empty cell? The other issue is that I am using this to delete rows also:
Range("A1").Select
This deletes the entire row when its corresponding cell A is empty. I currently make excel put xxx in cell A2500 before running the loop. I would put do until ActiveCell = Null, but that wont work because as you can see some cells in row are empty.
View 9 Replies
View Related
Dec 14, 2006
I have the following code that works beautifully, unless the selection area has only one row of data.
lastrow = Range("A11").End(xlDown).Row
Range("A11:A" & lastrow).Select
Due to other data (that needs to not be selected) near the bottom of the page, I cannot do xlUp. So, what's a fix when I run into only one row needing to be sleected?
View 2 Replies
View Related
Jan 18, 2007
I want to search in a column for cells with numbers, and one by one get the row number. i want to do this only for the cells with values, excluding the blank ones.
View 8 Replies
View Related
Jan 29, 2007
1. copy data to 'check' sheet from web
2. new data to be appended to the existing data ( not to overwrite on the existing one.
3. sorted within selection
4. down to 1st blank cell below pasted data
my code is not working not well
Sub Srt()
If Len(Range("a1")) > 0 Then
Range("a1").End(xlDown).Offset(1, 0).PasteSpecial
Else
Range("a1").PasteSpecial
End If
ActiveSheet.Paste
Selection.Sort Key1:=ActiveCell, Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortTextAsNumbers
Selection.End(xlDown)).Offset(1, 0).Select
End Sub
problems are
1. it works only in 'A' column. We need it to be flexible to 'A', 'F', or 'K' column depending on where the cursor is
View 9 Replies
View Related
Oct 27, 2008
The first one works fine but the "Description" and "Customer" paste over the top of each other and dont find the empty cell. im sure im missing something!
This submits the following details into the "Stored" table. It also finds an empty cell.
View 5 Replies
View Related
Feb 3, 2009
I want to copy a value in "A1" and i would like to paste it in Column "J" but the problem is that there are some values in column 'J' so i want a code that finds the first empty cell in column "J" and paste in there the value from "A1"
View 8 Replies
View Related
Mar 23, 2014
I have this code to look into the "find" match in Column A, and then search to the right for the next columns empty cell and update data. but it seem like the code can only manage to offset 1 and update data to Col B, instead of find the next empty cell to update data.
Code:
Dim vFind1 As String, vFind2 As String, rFound As RangeDim bFound As Boolean
vFind1 = Me.CBSupplier.Value
vFind2 = Me.CBProducts1.Value
Set rFound = Sheets("Main").Range("A:A").Find(Me.CBSupplier.Value, LookIn:=xlValues)
[Code]...
View 2 Replies
View Related
Feb 29, 2008
I'm looking for a macro that will search through E2:IV2 and take me to the first empty cell in that row.
I've tried a couple of things but none of them seem to do anything.
View 9 Replies
View Related
Apr 24, 2008
I am running this macro or some variation of it, depending on the column I need the time entered into:
Sub MacroD()
Dim LR As Long
LR = Range("D" & Rows.Count).End(xlUp).Row
ActiveSheet.Unprotect
Range("D18:D" & LR).Value = Now
ActiveCell.Offset(1, 0).Select
UserForm1.ListBox1.Text = "Time"
UserForm1.ListBox1.SetFocus
' UserForm1.Show
End Sub
When I need to run the same macro again (say I've run Macro D once, and now I need to run it again to get the next time), the forumla overrides the previous timestamp. I need the macro to find the next empty cell in column D and enter the timestamp there.
Sheet1 *ABCDEFGHIJKLMN15Major EventMajor Event Clock TimePUSH#########SPREAD########OUT FWD########REV########OUT REV########Delay########1617Start10:55:09*10:55:27 *10:56:24 *10:56:26 *10:56:19 *10:56:28 ####10:55:59 18W-U10:55:180.40010:56:23 0.01710:56:24 0.03310:56:26 0.01710:56:27 0.01710:56:28 0.03310:56:30 19MTT10:55:26######*0.000*0.000*0.000*0.000*0.000*20**0.000*0.000*0.000*0.000*0.000*0.000*21****0.000*0.000*0.000*0.000*0.000*> Excel Jeanie HTML 4
View 26 Replies
View Related
Apr 24, 2006
I have a spreadsheet that is pulled automatically from an access database.
The information that is pulled is invoices that have been paid for each of the temps working for our company.
Each month I have to give a figure per cost code on how much they are accruing so that they can see how much is still outstanding.
Right so what I am trying to do is have a macro take the temps charge rate then * 40 hours and place the amount into the empty cell.
As you will see in the attachement some of the cells are coloured. The purpose of the colouring is show that a invoice has been processed and paid for that week so no value is needed in that cell.
Then total all the cells at the end.
View 9 Replies
View Related
Jun 21, 2006
if there's a way to find the first non-empty cell in a worksheet?
Here's what I'm trying to do, the incorrect syntax is underlined:
If IsNotEmpty(123, 2) Then
'Execute some code
End If
View 5 Replies
View Related
Jul 11, 2006
I am trying to find the last cell across the columns in a specific row. i can do it going down using
Range("N6").Select
Selection.End(xlDown).Select
but can not get it to work going across.
View 2 Replies
View Related
Sep 12, 2006
I want to use the Find method to find an empty cell in the first column. But at the top of the data taqble, there are some empty cells, so I don't get the one I want. So I thought about searching in the column 1 excluding the first cells. Here is my
Dim rFoundCell As Range
Dim rFilledCol1 As Range
'I define the column excluding the cells that contain empty cells
rFilledCol1 = Columns(1) - Range("A1:A10")
Set rFoundCell = rFilledCol1.Find(What:="", After:=Range("A11"),
LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False)
But I get a Syntax error. Do you know why?
View 8 Replies
View Related
Oct 25, 2006
I am trying to find code that will find the first empty cell in a row and add data in cell left to right. This code is filling all data in the last cell of the row and I am hoping to have it loop through data and fill the first empy cell (M1) and next data placed (m2) and so on
Sub Reportdates()
Dim Grid As Range, Gridcell
Dim Crit1 As Range
Dim Crit2 As Range
Set Grid = ThisWorkbook.Worksheets("sheet3").Range(" dates")
Set Crit1 = ThisWorkbook.Worksheets("Stageing").Range("J1")
Set Crit2 = ThisWorkbook.Worksheets("Stageing").Range("K1")
For Each Gridcell In Grid
If Gridcell.Value >= Crit1 And Gridcell.Value <= Crit2 Then
ThisWorkbook.Worksheets("Stageing").Range("M1").End(xlToRight).Offset(0, 0) = Gridcell.Value
End If
'Exit For
Next Gridcell
End Sub
View 3 Replies
View Related
Feb 28, 2007
I am need of some code that I can assign to a button that will take a user to the first empty row of another worksheet in order to do some data entry. I only need to look in column A, which is titled "Tag Number."
View 2 Replies
View Related
Mar 28, 2007
I'm trying to use the find() function (or another if it exists) to find a previous non-empty cell.
Basically, the active cell will be ain a column with mostly empty cells, and I need it to move up the column looking for the previous cell that is not blank. I could do it with a loop, but I'd rather not if possible.
View 5 Replies
View Related
Jun 4, 2007
I am trying to write a macro which searches for a certain value (*?CNMT_LBID) in my worksheet, then copies it, plus the two cells to the right of it, to the first empty cell in the row above.
I have got so far, but am now stuck! I am not sure how to specify the row above my current cell, and then find the next blank cell to paste into.
Also, I'm not sure if my code is correct, any corrections are welcome!
Sub Move_Data()
'
Dim i As Integer 'for loop below
Dim rng As Range 'Cell to start 'cut' from
'rng = cell containing "*?CNMT_LBID"
Set rng = .Find(What:="*?CNMT_LBID", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False)
'Loop to cut cells "*?CNMT_LBID" plus next two columns to the right, and place in empty cell in row above
For i = 0 To 2
rng.Offset(0,i).Cut( )
Next
'delete now empty row
rng.Row.Delete
End Sub
View 7 Replies
View Related
Dec 15, 2011
I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
Code:
Sub TestBlankCell()
Range("D5").Select
Do
[Code].....
View 6 Replies
View Related
Mar 18, 2014
I'm trying to find the first empty cell in a column on one sheet, then insert the value in the adjacent cell to the left into a cell on a different sheet,
using this formula:
=offset((LOOKUP(1E+307,'[PO Log.xlsx]PO Log'!B:B)),0,-1)
But I keep getting an error popup.
View 1 Replies
View Related
Mar 20, 2005
I am using MS Excel 2000. Sheet1 is my working sheet. Cell A17 displays the current date (dd/mm/yyyy). Cells B17:K17 display my summary figures for that day. What I would like is a macro button that would look at the date in Cell A17, and if it is the first of the month …. eg 01/03/2005 it should insert a new sheet into the workbook and put the name Mar05in this case or what ever month it is on the tab. It then copies Cell A17:K17 and pastes the data in to the corresponding monthly sheet starting in A3 to K3. Because my working sheet (Sheet1) is updated with different data daily the new summary data (always in A17:K17) needs to be copied and pasted under the previous days entry in the corresponding monthly sheet. For the month of March I should end up with 31 entries giving me a summary for that month.
View 7 Replies
View Related
