I'm try to do a sum function on certain a column and the range will vary each time, the column will also vary.
I have the numbers of the rows but I also have the numbers of the columns, how do I get the letter of the column so I can use it in =SUM?
i did cur_col = ActiveCell.Column but I need it to return a number.
I have the following data:
column a: column B:
1
7
9
25
I need a formula to make column B equal to the current month adding the day in column A. so that column B equal the following:
column a: column B:
1 09/1/2009
7 09/7/2009
9 09/9/2009
25 09/25/2009
I am trying to figure how to show in one pivot table a current column and a proposed column. I have 15k rows of data. My data columns are employee, month, task, hours, proposed month. I can get a table that has months as columns and tasks as rows with sum of hours. What I would like to do is incorporate the proposed month, so that it shows hours in the months by current and proposed. That way my result would be January current, January proposed columns etc. I can change the propsed months by formulae so I want to play with the proposed task month the refresh the pivot table to see the results.
View 2 Replies View RelatedI'm trying to make the below two column selections into a selected range to clear out formulas/values in the range.
Current code segments:
ActiveCell.EntireColumn.Select
Columns(ActiveSheet.UsedRange.Columns(ActiveSheet.UsedRange.Columns.Count).Column).EntireColumn.Select
Is there a way to combine the two code segments into one selected range?
How can I use this code but tell it to select all but the right-most column? I have this piece of code...
View 4 Replies View RelatedI need a formula that will look in an array and return the first non-zero value it finds to the left of the column where the formula is located. For example, in a row with the following values:
$12,000 $- $- $24,000 $- $-
I would like to place a formula below each cell (in the next row) that reviews the row above and returns the first non-zero value to the left of the location of the current cell so that the results look so:
$12,000 $12,000 $12,000 $24,000 $24,000 $24,000
I need to create a formula that will reference row 3 in whatever column it's in.
If I copy the formula down the whole column I need it to always reference the third cell from the top. I've got a value in that row that I need all the formulas to use.
I know you can click a cell in a range, type ctrl-A, and select the current (used) region. Can you do this for a column? Select a cell in the column, type (?), and select the usedcells of that column.
View 3 Replies View RelatedI am using Excel 2010. I need to copy a list from any Column on the right to the existing Column. See the sample file.
View 10 Replies View RelatedI want to automatically populate C2 with the most current date from B9:B14.
I can't seem to figure out the formula.
How to add current date till the end of the column until data exists.
i used
With Range("A2")
.Value = Date
.NumberFormat = "mm/dd/yy"
A1 will have the heading and from A2 till data exists it should show the current date .i used above code it gives date in A2 but doesn't copy to the remaining rows.
From sheet1 on a checkbox click I am attempting to post the system date into sheet3 cell c3. If c3 already contains data then I want the cell selection to go down to the next row and post the date there. I if cell c3 has no data then it posts fine but if I need to goto the next row then I get a runtime error "object doesn't support this property or method".
If Me.GCN = True Then
If Not IsEmpty(Worksheets("GCN_Paid").Range("c3")) Then
Sheets(3).ActiveCell.Offset(1, 0).Select
Sheets(3).Range("c3") = Date
Else
Sheets(3).Range("c3") = Date
End If
End If
I have created a simple command button for tallying that will increase the count in the output cell by one every time it is clicked. It has basic code like this:
Private Sub ProductRegistration_Click()
[D4] = [D4] + 1
End Sub
On top of that, I want the output cell of this command button to switch every day. In this case, it would move to E4 tomorrow. The columns are dated but I can't figure out how to get the output cell to automatically change with the system date so I don't have to manually change it every day.
I have series of data values like below. I have to find Maximum, Minimum values for each of these values.
9430
9822
10070
[Code].....
I have a vba script that matches a date on two sheets then copies a formula based on the location of the date, the problem I am having is how can I refer to the activecell and active column without typing them manually as the range will change each day. See vba script below:
VB:
Sub find_date()
Dim FindString As String
Dim Rng As Range
[Code]......
setup:
Columns: c)6:00 AM, d)6:15 AM, e)6:30 AM
Rows: 4)tech1 Phone, 5)Tech2 Phone, 6)Tech3 Phone
What I am tying to do is to select the column that matches the time, for instance anything before 6 AM would select Column C, betweeb 6 and 6:14 still selects column C, 6:15 to 6:29 selects column D, Etc
I have part of this routine working correctly. It will go and find the value I need and move to the next column using the Offset method, but now what am I doing wrong to try and get the code to select to the end of the current column?
Sub Find_First()
Dim FindString As String
Dim rng As Range
'FindString = InputBox("Enter a Search value")
FindString = Worksheets("Template").Range("A26").value
If Trim(FindString) <> "" Then
With Sheets("Service Level Score Paste Sheet").Range("A:A")
Set rng = .find(What:=FindString, _
After:=.Cells(.Cells.Count), _
LookIn:=xlValues, _
LookAt:=xlWhole, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, _
MatchCase:=False)
rng.Select...........................
trying to find the value of column A (date field) if it exists on the row that the cursor is presently on. I'm trying to check for the value before performing the next function to make sure the user is on a valid row. Cursor could be on any column A to F. Columns are always 6 but the rows can vary.
View 7 Replies View Relatedi have a sheet for monitoring sickness. i have used a macro before which automatically selects a range and emails it to recipients when i press a button. what i would like to do is have excel automatically choose the range for me based on today's day. in the attached example i would like column "A" copied along with the 5 columns before today's date, today's date column and also the 5 columns after today's date. paste the lot into an email and send. (i have highlghted the parts i would like copied and pasted into an email based on today's date (21st july).
View 4 Replies View RelatedCode to enter the current date in column if the values are entered in the adjacent column's.
View 2 Replies View RelatedThe first line of the code chooses the columns to select; all columns until there is no value. From there I need to have it sort those columns based on row 1. The problem is that the columns chosen are variable. It could be columns I:N (as shown below) or column G:Z or any other combination. (The code below was recorded if that matters at all.)
View 2 Replies View RelatedI am having trouble with my macro. I have attached excel sheet for reference.
Basically, I want a Macro that Looks up columns B & C of current sheet and matches it with table in the charges tab, and then returns hourly pay in column D.
I have created the macro but it's giving me Run time 1004 error.
Also, my formula is incorrect. Maybe that's why my macro isn't working?
2WayLookup_Macro.xlsm‎
I have an excel sheet wherin there is a column that has the data where in the dates are displayed and many other columns.
I get this excel every Thursday so i want to filter this date column in such a way that it give me the data related to the date of the previous week only yet there is a catch here. When i say previous week i mean.
Suppose today is 03/14/14 then i want the data from 03/07/14 till today ie Last week friday to this week full( so cant use Current week option) and then paste it in a new sheet.
I tried the Record part but in that it is taking a hard coded value as i am selecting the date myself. I dont want to change the date manually every time.
this was the macro that was created
Code:
ActiveSheet.Range("$A$1:$BX$58").AutoFilter Field:=1, Operator:= _
xlFilterValues, Criteria2:=Array(1, "3/10/2014")
Range("A59").Select
ActiveCell.FormulaR1C1 = "=COUNT(R[-4]C:R[-1]C)"
Range("A60").Select
file storage
1. Look at the "Days so far" section
2. Ignore cell C1
3. All the other cells in that row are shaded blue. Look at these.
4. Look at the "Volunteer" row - all the cells in that row are shaded blue. Look at these.
5. Wherever a name - any name - appears in the "Volunteer" row, 1 is added to the previous number in the "Days so far" section and the result is displayed in cell from the "Days so far" row above that Volunteer's name.
6. For example, we begin in C1 with a count of 12 days so far - this was manually entered
7. In cell H5, we see Henry has volunteered 1 day. The total no. of days so far should now be 12+1. Therefore, the number in H1 should be 13.
8. In cell G47, we see Joseph has volunteered 1 day. The total number of days volunteered BEFORE Joseph volunteered is 15 (see cell D43). But now, with Joseph volunteering 1 day, the total no. of days so far should now be 15+1. Therefore, the number in G43 should be 16.
9. what formula l must put in the "Days so far" row (excluding cell C1, which is manually input) to give me the "should be" results predicted in that row? I'm guessing it will be a formula which looks at each row fragment of the "Days so far" row, row by row, right up to the previous cell in that row, all within one formula.
P.S. I just want to leave the "Days so far" row blank, for any columns where there are no volunteers in the "Volunteer" row, so please don't give a formula which inserts zero for days with no volunteer, and then sums the cumulative total.
I have dates in my column “A”, for example (A1 cell =22-Mar-1971), (A2 cell=30-Dec-1965). Now my requirement is in B column date and month from A column and year should take current year. Output in B column (B1 cell =22-Mar-2009), (B2 cell=30-Dec-2009)
View 3 Replies View RelatedWhen I'm moving around in an Excel sheet, I want to have a keyboard shortcut that Autofits only the column I am "in", and only to the width of the cell I'm "in". So I can arrow-key into a cell, hit ctrl-shift-W or whatever, and the column will autofit.
I try Cells.EntireColumn.AutoFit but that's not what I want, it autofits every column. Sometimes this is not appropriate and I want to do it manually for the columns I want auto-fit.
I guess the more general question is how do I write VBA code for the column I am in and not every column or a specific column - not Columns("A:I") or whatever, it's going to be a different column every time depending on what cell I'm editing.
EXAMPLE: Complete Sheet called "Day1". When day1 is complete you click on button and it then copies itself and creates and renames new sheet to "Day2", then when "Day2" is complete you click on button and it then copies itself and creates and renames new sheet to "Day3", and so on and so forth to "Day30".
View 9 Replies View RelatedBasically, I'm doing a recorded macro for work where I take an export and manipulate the data to show differences between sales from last year and this year. Also comparing this months projected sales to avg of last 6 months and also against last years this month.
The problem I'm running into is in automating the this month sales for mid-month exports. I can do it individually but I can't find a formula that will do it. Data is in one cell per month, so ex. 130 sales this month so far. I need to have it convert that to projected sales for total month based on what day it currently is.
I want a macro to take the current time and if it is less than 09:00am, I want it to set a variable to be the current time on the previous day.
Basically, an operational day runs from 09:00am to 08:59am the following day.
08:45am on Saturday 13 July (for example) should be recorded as 08:45am on Friday 12 July.
All data is located within one book. I have two sheets with material codes in each sheet which include pricing (existing and current)
Sheet1 (has existing material codes plus existing pricing) Has about 1200 lines
Sheet2 (has current material codes plus current pricing), has about 36000 lines
I need to cross check if the material code (taken from sheet1) are still available in sheet2, and if they are, copy the current price back to sheet1. The current price needs to be pasted back into sheet1 (next to the existing price). If the material code doesn't exist (for whatever reason, in sheet2), the program needs to move onto the next line and leave the current price for that material code blank. The program should finish once all the lines in sheet1 are completed. I have attached a sample of what I'm trying to do,